The Atomic Games Legacy : V for Victory

Gamers can also use this forum to chat about any game related subject, news, rumours etc.

Moderator: maddog986

User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

The Atomic Games Legacy : V for Victory

Post by ikrananka »

I'm pleased to announce that I have just published the first video in a series covering the incredible computer wargaming legacy left by Atomic Games. This first video covers the creation of Atomic Games in 1989 and the development and release of their first game in the V for Victory series, D-Day : Utah Beach.

I spent a lot of time researching this video and believe there may well be some things in this video that you didn't know before.

I hope that you enjoy this video and that you find it informative. I'm always trying to improve and so please let me know what you think either in the video comments section or by replying to this post.

https://youtu.be/6Vf_7UOKbhg
User avatar
sPzAbt653
Posts: 10158
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: The Atomic Games Legacy : V for Victory

Post by sPzAbt653 »

Well done ! Always good to see something about this excellent series that I spent many hours with back in the day. A great supply and attachment system that I've not seen picked up by any other game. I will still occasionally enjoy them using DBGL, and used the scale and scope to design a scenario for TOAW: tm.asp?m=4027597
User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

RE: The Atomic Games Legacy : V for Victory

Post by ikrananka »

Thanks :)

I agree that the supply and attachment system was very well done. Very realistic to be able to reattach units between HQs.

Very cool scenario you created for TOAW - well done. Did you take a look at the map in Atomic Games' World at War game D-Day : America Invades? This covers much of the same area as your scenario.

I see someone mentions The Atlantic Wall game in your thread. I forgot that it was Joe Balkoski that designed that game. He wrote the introduction in the Utah Beach Battlebook that I cover in my video.
User avatar
sPzAbt653
Posts: 10158
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: The Atomic Games Legacy : V for Victory

Post by sPzAbt653 »

Did you take a look at the map in Atomic Games' World at War game D-Day : America Invades?
Absolutely! The scenario scale was based on America Invades and the other V4V Normandy games. Sadly the mechanics aren't the same, but it is still a lot of fun to play.
User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

RE: The Atomic Games Legacy : V for Victory

Post by ikrananka »

ORIGINAL: sPzAbt653
Did you take a look at the map in Atomic Games' World at War game D-Day : America Invades?
Absolutely! The scenario scale was based on America Invades and the other V4V Normandy games. Sadly the mechanics aren't the same, but it is still a lot of fun to play.

Cool - I'll have to give TOAW a try one day. But V for Victory and World at War first [:)]
JamesM
Posts: 1026
Joined: Mon Aug 28, 2000 8:00 am
Location: QLD, Australia

RE: The Atomic Games Legacy : V for Victory

Post by JamesM »

It is interesting they partnered with 360 Pacific. Any game I brought from them felt very buggy, the one game that was closest to being ready was Harpoon 2. Wasn't 360 who released Patriot in 91/92 about the first Gulf war, there was a playable enjoyable computer game there somewhere but I could not find it.
User avatar
zakblood
Posts: 22784
Joined: Thu Oct 04, 2012 11:19 am

RE: The Atomic Games Legacy : V for Victory

Post by zakblood »

still have the boxed game in my collection

Code: Select all

https://www.youtube.com/watch?v=_W-p8RNb5v0
Windows 11 Pro 64-bit (25H2) (26200.7309)
User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

RE: The Atomic Games Legacy : V for Victory

Post by ikrananka »

ORIGINAL: jamesm
It is interesting they partnered with 360 Pacific.

At the end of the day it's the developer who is responsible for bug fixing, but they may only do this when the publisher provides funding, e.g. as part of the original contractual agreement. This was the issue with the World at War series of games in that Avalon Hill did not provide (sufficient? / any?) funding for bug fixing and as such Atomic barely patched those games and as a result the World at War series is well known for its bugs.

Just FYI, here's the paragraph in the Utah Beach Battlebook where Three-Sixty coming on board is discussed:

"We actually didn't have any contact with Three-Sixty until July 1991, only six months before Version 1.0 was released. At that time, we were looking for a new publisher, having just terminated our contract with a smaller company. We made an appointment with Three-Sixty's product development office in Bryan, Texas and showed them what we had. Less than two hours after we left Bryan, Three-Sixty's President, Tom Frisna, called Keith from California and the rest, as they say, is history!"

According to Wikipedia, Three-Sixty published Patriot in 1993.
User avatar
demyansk
Posts: 2874
Joined: Wed Feb 20, 2008 12:55 pm

RE: The Atomic Games Legacy : V for Victory

Post by demyansk »

What do I have to do to play these games? I still have three of them.
User avatar
Greybriar
Posts: 1158
Joined: Fri Feb 09, 2007 6:54 am

RE: The Atomic Games Legacy : V for Victory

Post by Greybriar »

ORIGINAL: demjansk

What do I have to do to play these games? I still have three of them.
You might try using DOSBox.
This war is not about slavery. --Robert E. Lee
User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

RE: The Atomic Games Legacy : V for Victory

Post by ikrananka »

ORIGINAL: demjansk

What do I have to do to play these games? I still have three of them.

If these are the DOS versions, then yes, use DosBox. Personally I use the D-Fend Reloaded Frontend as it makes setting up the DosBox configuration file and running the games so much easier. D-Fend Reloaded also comes with DosBox included so it's just one installation. I install D-Fend Reloaded as a "Portable" installation - this means I can simply copy and paste the entire D-Fend Reloaded install folder to any other location, which also includes the games in D-Fend's subdirectories, and run them without ANY installation. SO, you could put the entire D-Fend folder onto a USB flash drive for example, and play the game off of the flash drive.

I only needed to tweak a few settings to get the V4V games running perfectly. Under CPU I changed CPU Cycles from Auto to a fixed value of 15000. Auto made the game run far too slowly. Under graphics I changed Full Screen Resolution to 0x0 which forces DosBox to use the native resolution of the screen. I also set Render to Overlay and the video card to svga_s3.

The non-default parts of my DosBox configuration file are below.

[sdl]
fullscreen=true
fulldouble=false
fullresolution=0x0
windowresolution=1280x960
output=overlay
autolock=true
sensitivity=100
waitonerror=true
usescancodes=true
priority=higher,normal
mapperfile=D:\Users\[Username]\Documents\D-Fend Reloaded\mapper.map

[dosbox]
machine=svga_s3
captures=D:\Users\[Username]\Documents\D-Fend Reloaded\Capture\V4V\
memsize=16

[render]
frameskip=0
aspect=false
scaler=none

[cpu]
core=auto
cputype=auto
cycles=fixed 15000
cycleup=500
cycledown=20


For the World at War games the same settings work except that I needed to increase the CPU Cycles to 30000 to get the game running at a normal speed.
Zorch
Posts: 7087
Joined: Sun Mar 07, 2010 4:21 pm

RE: The Atomic Games Legacy : V for Victory

Post by Zorch »

ORIGINAL: ikrananka2
ORIGINAL: demjansk

What do I have to do to play these games? I still have three of them.

If these are the DOS versions, then yes, use DosBox. Personally I use the D-Fend Reloaded Frontend as it makes setting up the DosBox configuration file and running the games so much easier. D-Fend Reloaded also comes with DosBox included so it's just one installation.

O only needed to tweak a few settings to get the V4V games running perfectly. Under CPU I changed CPU Cycles from Auto to a fixed value of 15000. Auto made the game run far too slowly. Under graphics I changed Full Screen Resolution to 0x0 which forces DosBox to use the native resolution of the screen. I also set Render to Overlay and the video card to svga_s3.

The non-default parts of my configuration file are below.

[sdl]
fullscreen=true
fulldouble=false
fullresolution=0x0
windowresolution=1280x960
output=overlay
autolock=true
sensitivity=100
waitonerror=true
usescancodes=true
priority=higher,normal
mapperfile=D:\Users\[Username]\Documents\D-Fend Reloaded\mapper.map

[dosbox]
machine=svga_s3
captures=D:\Users\[Username]\Documents\D-Fend Reloaded\Capture\V4V\
memsize=16

[render]
frameskip=0
aspect=false
scaler=none

[cpu]
core=auto
cputype=auto
cycles=fixed 15000
cycleup=500
cycledown=20


For the World at War games the same settings work except that I needed to increase the CPU Cycles to 30000 to get the game running at a normal speed.
+1 good to know.
User avatar
sPzAbt653
Posts: 10158
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: The Atomic Games Legacy : V for Victory

Post by sPzAbt653 »

In addition to D-Fend Reloaded, there is one called DosBox Game Launcher [DBGL] which in some cases works better.
User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

RE: The Atomic Games Legacy : V for Victory

Post by ikrananka »

ORIGINAL: sPzAbt653

In addition to D-Fend Reloaded, there is one called DosBox Game Launcher [DBGL] which in some cases works better.

I've not tried DosBox Game Launcher - looks good. Can you describe how it sometimes works better?
User avatar
sPzAbt653
Posts: 10158
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: The Atomic Games Legacy : V for Victory

Post by sPzAbt653 »

Something about being a little faster, but I'm not technically proficient so I can't report why, but it is.
User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

RE: The Atomic Games Legacy : V for Victory

Post by ikrananka »

ORIGINAL: sPzAbt653

Something about being a little faster, but I'm not technically proficient so I can't report why, but it is.

Hmm - I'll have to look into that. I'm assuming that the speed benefit is with the interface and not DosBox.
User avatar
Fred98
Posts: 4019
Joined: Fri Jan 05, 2001 10:00 am
Location: Wollondilly, Sydney

RE: The Atomic Games Legacy : V for Victory

Post by Fred98 »

Great video! I look forward to the next one.
jcrohio
Posts: 485
Joined: Sun Apr 03, 2005 9:13 pm
Location: Ohio

RE: The Atomic Games Legacy : V for Victory

Post by jcrohio »

Always wanted to get into this series. Your videos have edged me into trying them. Thanks!!!
Jack
User avatar
ikrananka
Posts: 71
Joined: Thu Jun 19, 2014 12:57 pm

RE: The Atomic Games Legacy : V for Victory

Post by ikrananka »

ORIGINAL: jcrohio

Always wanted to get into this series. Your videos have edged me into trying them. Thanks!!!

Cool - have fun with them - they really are still so good.
User avatar
hingram
Posts: 129
Joined: Wed Feb 06, 2002 10:00 am
Location: SW Virginia

RE: The Atomic Games Legacy : V for Victory

Post by hingram »

You can get the V4V games as Abandonware but they really show their age.
Hank

If you aren't part of the solution, there is good money to be made prolonging the problem.
Post Reply

Return to “General Discussion”