Matrix Games Forums

Thanks guys! I appreciate all the work you put into this!

ORIGINAL: Q-Ball

Thanks Floyd! I am close.....the program now initializes, but I get an error message:

"The save file is for turn 6, and later turns are already loaded"

I haven't loaded anything of course, what is it trying to read? I went over the properties settings, and I am pretty sure those are correct

QBall, when you mean initialise you mean you get to see Tracker screens? When the program initialises, it does load the first turn you have linked to in your properties file...

I'd delete all the trackerdb*. files and start again, it sounds like you got a partial load to start with...

OR

maybe it is initialised, but then are you trying to load a new turn, and it is from the same turn ...

Out to work now, but I'll be back later to add my hand if you need.
--Damian--

ORIGINAL: floydg

Q-ball: this message comes when you use the "Read Turn" function, so you must have done something...
When the program starts up for the first time, it loads an initial turn. Maybe you're trying to load the same turn?

That is correct, it happens during "Read Turn". I has a turn loaded though from a game I was playing against the AI; I have deleted this game, and never loaded it into Tracker?[&:]

Do I need to re-install Tracker? Maybe that will erase the data.

ORIGINAL: Q-Ball

ORIGINAL: floydg

Q-ball: this message comes when you use the "Read Turn" function, so you must have done something...
When the program starts up for the first time, it loads an initial turn. Maybe you're trying to load the same turn?

That is correct, it happens during "Read Turn". I has a turn loaded though from a game I was playing against the AI; I have deleted this game, and never loaded it into Tracker?[&:]

Do I need to re-install Tracker? Maybe that will erase the data.

Delete the trackerdb.xxx files. There should be four different ones.
Check the witptracker.properties file to be sure the proper save file slot is being used and that the SaveMode is how you want it.
Re-run the witptracker.bat file.

Floyd, it works. You are the man! Thank you for being so patient and walking me through it. Now I can tell how badly I am managing the Japanese economy![&o][&o]

ORIGINAL: Q-Ball

Floyd, it works. You are the man! Thank you for being so patient and walking me through it. Now I can tell how badly I am managing the Japanese economy![&o][&o]

Remember to also Import the Region file (Nomads seems to be a good one to use - so thanks to him), this will give you a better understanding of the macro issues. Instructions on the web site.

Regards
Damian

ORIGINAL: n01487477
Remember to also Import the Region file (Nomads seems to be a good one to use - so thanks to him), this will give you a better understanding of the macro issues. Instructions on the web site.

Thanks very much Damian for the terrific tool you have developped. It has worked immediatly once patch 1 has been released.
Without it, management of the japanese economy and more specifically the aircraft industry is a nightmare.
I have this morning using WITPTracker spend one hour to adjust the engine production in relationship with the need of the aircraft production.
Concerning the region file is there one already developped by a player available on the site ?

Micke II,
thanks for the high praise, if you have version 1.0.1, the file is in the region-mappings folder. So when you use file->Import base Region Definitions, go into the region-mappings folder and use either the regionfile_full, which was my quick attempt or Nomads Nomad_Region_File_4, which seems to be much better and more detailed, but has Japan broken into regions as well.

Instructions are on the Tracker web site.

Regards
Damian

ORIGINAL: n01487477

Micke II,
thanks for the high praise, if you have version 1.0.1, the file is in the region-mappings folder. So when you use file->Import base Region Definitions, go into the region-mappings folder and use either the regionfile_full, which was my quick attempt or Nomads Nomad_Region_File_4, which seems to be much better and more detailed, but has Japan broken into regions as well.

Instructions are on the Tracker web site.

Regards
Damian

Thanks Damian Nomad's file works fine.

ORIGINAL: n01487477

Micke II,
thanks for the high praise, if you have version 1.0.1, the file is in the region-mappings folder. So when you use file->Import base Region Definitions, go into the region-mappings folder and use either the regionfile_full, which was my quick attempt or Nomads Nomad_Region_File_4, which seems to be much better and more detailed, but has Japan broken into regions as well.

Instructions are on the Tracker web site.

Regards
Damian

On that note, another request. Would it be possible to have Regions and Sub-Regions? I like the islands of Japan broken down sometimes and other times I would like to have a region that is a composite of the islands. One of those requests for a few weeks or months from now.

Hi Damian and Floyd,

a big thank you from me too for your wonderful tool. [:)]

Marc

Might already be in the pipeline but LCU need an extra column for the Ops mode they are in.

ORIGINAL: Chris H

Might already be in the pipeline but LCU need an extra column for the Ops mode they are in.

The plan is to make an initial release supporting AE with the classic WitPTracker base. Then the next pass is to enhance with AE-specific stuff. The first release did include some of the latter, as it was deemed critical (especially in the area of production).

But your request is certainly on the list.

Floyd

ORIGINAL: Nomad
On that note, another request. Would it be possible to have Regions and Sub-Regions? I like the islands of Japan broken down sometimes and other times I would like to have a region that is a composite of the islands. One of those requests for a few weeks or months from now.

Interesting idea. Decent amount of code surgery required...

Have you managed to find out why all my units are showing as receiving replacements ?

Edit : There are probably some bugs when units upgrade from one type of device to the next. In my game the 14th RAAF BF upgraded from CMF Militia to CMF Infantry, yet the unit is still listed in the 'pool history' of the militia and not listed in that of the infantry.
In India, the 48td Ghurka traded in its 18-pounders for 25-pounders, but the units isn't listed in the pool history of either device. They may still be counted in the total active number for the upgraded device, as I am finding that the number of all units listed in the pool history is often less then the total active number given.

ORIGINAL: Smeulders

Have you managed to find out why all my units are showing as receiving replacements ?

Not yet. I'll try to look at it tonight.

Ok thanks

Edit to avoid double posting.

Thanks, fix seemed to work, as far as I can tell all units are now correctly displaying whether they are accepting replacements or not.

I got the database intialized and first turn loaded but when i try and load a new turn it closes and logs this error in my tracker folder. Any help would be appreciated. Hope this wasnt covered before. By the way great tool for this game.

#
# A fatal error has been detected by the Java Runtime Environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d901afd, pid=3236, tid=3860
#
# JRE version: 6.0_16-b01
# Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode, sharing windows-x86 )
# Problematic frame:
# V [jvm.dll+0x101afd]
#
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
#

--------------- T H R E A D ---------------

Current thread (0x0529e400): JavaThread "AWT-EventQueue-0" [_thread_in_vm, id=3860, stack(0x057e0000,0x05830000)]

siginfo: ExceptionCode=0xc0000005, reading address 0x00000000

Registers:
EAX=0x00000000, EBX=0x0529e400, ECX=0x0529e400, EDX=0x6d9f1158
ESP=0x0582f4b8, EBP=0x0582f4d4, ESI=0x0529e510, EDI=0x00000000
EIP=0x6d901afd, EFLAGS=0x00010246

Top of Stack: (sp=0x0582f4b8)
0x0582f4b8: 0529ecc0 0529e510 00000000 0529e400
0x0582f4c8: 02bfaac4 00000094 6d9f1158 05376db0
0x0582f4d8: 10002eaf 0529e400 00000000 00000000
0x0582f4e8: 00e7ef00 1ada1a40 100035fd 00000000
0x0582f4f8: 00000000 00e7ef00 1ada1a40 26feb640
0x0582f508: 0582f568 0529e400 26feb640 02f62fa8
0x0582f518: 00000014 00000017 00e7ef00 1ada1a40
0x0582f528: 1001c90c 00a19e37 05376d98 02f62f90

Instructions: (pc=0x6d901afd)
0x6d901aed: 8d 4d f0 e8 db ce 07 00 8b 7d 10 85 ff 8b 45 0c
0x6d901afd: 8b 10 7c 50 8b 45 14 85 c0 7c 49 8b 72 08 8d 0c


Stack: [0x057e0000,0x05830000], sp=0x0582f4b8, free space=317k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x101afd]

Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j JNIpws.JNIpws.jPWSGetNextItem()V+0
j witptracker.SaveFileReader.ReadScenarioTurnNumber(Lwitptracker/Properties;)I+79
j witptracker.GUIMain.ReadNewTurn()V+50
j witptracker.GUIMain.actionPerformed(Ljava/awt/event/ActionEvent;)V+69
j javax.swing.AbstractButton.fireActionPerformed(Ljava/awt/event/ActionEvent;)V+84
j javax.swing.AbstractButton$Handler.actionPerformed(Ljava/awt/event/ActionEvent;)V+5
j javax.swing.DefaultButtonModel.fireActionPerformed(Ljava/awt/event/ActionEvent;)V+35
j javax.swing.DefaultButtonModel.setPressed(Z)V+117
j javax.swing.AbstractButton.doClick(I)V+64
j javax.swing.plaf.basic.BasicMenuItemUI.doClick(Ljavax/swing/MenuSelectionManager;)V+53
j javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Ljava/awt/event/MouseEvent;)V+62
j java.awt.Component.processMouseEvent(Ljava/awt/event/MouseEvent;)V+64
j javax.swing.JComponent.processMouseEvent(Ljava/awt/event/MouseEvent;)V+23
j java.awt.Component.processEvent(Ljava/awt/AWTEvent;)V+81
j java.awt.Container.processEvent(Ljava/awt/AWTEvent;)V+18
j java.awt.Component.dispatchEventImpl(Ljava/awt/AWTEvent;)V+562
j java.awt.Container.dispatchEventImpl(Ljava/awt/AWTEvent;)V+42
j java.awt.Component.dispatchEvent(Ljava/awt/AWTEvent;)V+2
j java.awt.LightweightDispatcher.retargetMouseEvent(Ljava/awt/Component;ILjava/awt/event/MouseEvent;)V+320
j java.awt.LightweightDispatcher.processMouseEvent(Ljava/awt/event/MouseEvent;)Z+139
j java.awt.LightweightDispatcher.dispatchEvent(Ljava/awt/AWTEvent;)Z+50
j java.awt.Container.dispatchEventImpl(Ljava/awt/AWTEvent;)V+12
j java.awt.Window.dispatchEventImpl(Ljava/awt/AWTEvent;)V+19
j java.awt.Component.dispatchEvent(Ljava/awt/AWTEvent;)V+2
j java.awt.EventQueue.dispatchEvent(Ljava/awt/AWTEvent;)V+46
j java.awt.EventDispatchThread.pumpOneEventForFilters(I)Z+204
j java.awt.EventDispatchThread.pumpEventsForFilter(ILjava/awt/Conditional;Ljava/awt/EventFilter;)V+30
j java.awt.EventDispatchThread.pumpEventsForHierarchy(ILjava/awt/Conditional;Ljava/awt/Component;)V+11
j java.awt.EventDispatchThread.pumpEvents(ILjava/awt/Conditional;)V+4
j java.awt.EventDispatchThread.pumpEvents(Ljava/awt/Conditional;)V+3
j java.awt.EventDispatchThread.run()V+9
v ~StubRoutines::call_stub

--------------- P R O C E S S ---------------

Java Threads: ( => current thread )
0x05370800 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=3468, stack(0x05b20000,0x05b70000)]
0x05358000 JavaThread "TimerQueue" daemon [_thread_blocked, id=1592, stack(0x05860000,0x058b0000)]
0x003b6400 JavaThread "DestroyJavaVM" [_thread_blocked, id=2272, stack(0x009c0000,0x00a10000)]
=>0x0529e400 JavaThread "AWT-EventQueue-0" [_thread_in_vm, id=3860, stack(0x057e0000,0x05830000)]
0x03088400 JavaThread "AWT-Windows" daemon [_thread_blocked, id=1408, stack(0x056b0000,0x05700000)]
0x03087400 JavaThread "AWT-Shutdown" [_thread_blocked, id=3316, stack(0x05660000,0x056b0000)]
0x0528b800 JavaThread "Java2D Disposer" daemon [_thread_in_native, id=1120, stack(0x055c0000,0x05610000)]
0x02f21800 JavaThread "HSQLDB Timer @136228" daemon [_thread_blocked, id=1096, stack(0x03120000,0x03170000)]
0x02bb8800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2784, stack(0x02e30000,0x02e80000)]
0x02bb2800 JavaThread "CompilerThread0" daemon [_thread_blocked, id=684, stack(0x02de0000,0x02e30000)]
0x02bb1000 JavaThread "Attach Listener" daemon [_thread_blocked, id=1932, stack(0x02d90000,0x02de0000)]
0x02bafc00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1436, stack(0x02d40000,0x02d90000)]
0x02b6dc00 JavaThread "Finalizer" daemon [_thread_blocked, id=4072, stack(0x02cf0000,0x02d40000)]
0x02b6c800 JavaThread "Reference Handler" daemon [_thread_blocked, id=2032, stack(0x02ca0000,0x02cf0000)]

Other Threads:
0x02b6b000 VMThread [stack: 0x02c50000,0x02ca0000] [id=3168]
0x02bbac00 WatcherThread [stack: 0x02e80000,0x02ed0000] [id=1296]

VM state:synchronizing (normal execution)

VM Mutex/Monitor currently owned by a thread: ([mutex/lock_event])
[0x003b54e8] Threads_lock - owner thread: 0x02b6b000

Heap
def new generation total 4544K, used 0K [0x22990000, 0x22e70000, 0x22e70000)
eden space 4096K, 0% used [0x22990000, 0x22990000, 0x22d90000)
from space 448K, 0% used [0x22d90000, 0x22d90000, 0x22e00000)
to space 448K, 0% used [0x22e00000, 0x22e00000, 0x22e70000)
tenured generation total 60544K, used 49882K [0x22e70000, 0x26990000, 0x26990000)
the space 60544K, 82% used [0x22e70000, 0x25f269b8, 0x25f26a00, 0x26990000)
compacting perm gen total 12288K, used 6470K [0x26990000, 0x27590000, 0x2a990000)
the space 12288K, 52% used [0x26990000, 0x26fe1918, 0x26fe1a00, 0x27590000)
ro space 8192K, 63% used [0x2a990000, 0x2aea9920, 0x2aea9a00, 0x2b190000)
rw space 12288K, 53% used [0x2b190000, 0x2b804dd0, 0x2b804e00, 0x2bd90000)

Dynamic libraries:
0x00400000 - 0x00424000 C:\Program Files\Java\jre6\bin\javaw.exe
0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL
0x629c0000 - 0x629c9000 C:\WINDOWS\system32\LPK.DLL
0x74d90000 - 0x74dfb000 C:\WINDOWS\system32\USP10.dll
0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d800000 - 0x6da8b000 C:\Program Files\Java\jre6\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll
0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll
0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll
0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll
0x6d000000 - 0x6d14a000 C:\Program Files\Java\jre6\bin\awt.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll
0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\comctl32.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll
0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll
0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime
0x6d230000 - 0x6d284000 C:\Program Files\Java\jre6\bin\fontmanager.dll
0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll
0x05830000 - 0x05836000 C:\WINDOWS\system32\d3d8thk.dll
0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll
0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\shell32.dll
0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll
0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll
0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x6d450000 - 0x6d474000 C:\Program Files\Java\jre6\bin\jpeg.dll
0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.DLL
0x6d1a0000 - 0x6d1c3000 C:\Program Files\Java\jre6\bin\dcpr.dll
0x10000000 - 0x1d242000 C:\Documents and Settings\Jesse Koenig\My Documents\WITP AE Tracker\pwsdll.dll
0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll

VM Arguments:
java_command: C:\Documents and Settings\Jesse Koenig\My Documents\WITP AE Tracker\witptracker.jar
Launcher Type: SUN_STANDARD

Environment Variables:
CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\
USERNAME=Jesse Koenig
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel



--------------- S Y S T E M ---------------

OS: Windows XP Build 2600 Service Pack 3

CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 6, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3

Memory: 4k page, physical 2094364k(1021360k free), swap 4194303k(3975988k free)

vm_info: Java HotSpot(TM) Client VM (14.2-b01) for windows-x86 JRE (1.6.0_16-b01), built on Jul 31 2009 11:26:58 by "java_re" with MS VC++ 7.1

time: Mon Sep 14 23:24:08 2009
elapsed time: 36 seconds

Stu [;)]

This is most probably a memory issue (at least that was 100% of the cases I had with this error). You need to be sure the JVM is getting enough memory. Are you running the .bat file or running the .jar directly? If you look at the .bat file, you need to be sure the heap size is at least what I have in there.

Floyd

Finally got around to installing the AE version.  Got 1.0.1 installed and setup with no problems, after updating both Java and C++ fixpack. 
 
Sure does start up a lot faster with only the Guad scenario's worth of data, compated to the CHS Campaign.  [:)]
 
Thanks, as always, guys.  I'll look forward to pointing out bugs for you.  [;)]