Matrix Games Forums

Thanks!

AW101 Merlin

Copy Rotorcraft.Merlin.obj inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls, search for "Merlin" and replace the mesh name with Rotorcraft.Merlin.obj

Original model was "merlin helicopter" by special_boy from 3D Warehouse.

HMS Trafalgar (S107)

Copy Watercraft.Trafalgar.obj inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls, search for "Trafalgar" and replace the mesh name with Watercraft.Trafalgar.obj

This model is made by me.

SH-3 Sea King

Copy Rotorcraft.Seaking.obj inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls and Associations_CWDB.xls, search for "Sea King" and replace the mesh name with Rotorcraft.Seaking.obj

Original model was "SH-3 Sea King" by Lazarus S from 3D Warehouse.

I've also fixed the Astute model, it was missing part of the rudder. The file is in the previous post.

Google Drive link with the latest version of every model.
https://drive.google.com/open?id=1ICDXc ... GzJuJFdOBA
Image album with all the released models
https://imgur.com/a/hunHXuG

Project 885M (Yazen)

Copy Watercraft.Project 885M.obj inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls, search for "Yazen" and replace the mesh name with Watercraft.Project 885M.obj

Original model was "АПЛ пр.885" by SAElin. S from 3D Warehouse.

Project 955A (Borei)

Copy Watercraft.Project 955.obj inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls, search for "Borey" and replace the mesh name with Watercraft.Project 955A.obj

Original model was "РПКСН пр.955" by SAElin. S from 3D Warehouse.

Google Drive link with the latest version of every model.
https://drive.google.com/open?id=1ICDXc ... GzJuJFdOBA
Image album with all the released models
https://imgur.com/a/hunHXuG

SH-60 Seahawk

Copy Rotorcraft.SH-60.obj inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls, search for "Seahawk" and replace the mesh name with Rotorcraft.SH-60.obj

I've just added some details on the original UH-60 model from Tacview.

Google Drive link with the latest version of every model.
https://drive.google.com/open?id=1ICDXc ... GzJuJFdOBA
Image album with all the released models
https://imgur.com/a/hunHXuG

Westland Lynx

Copy Rotorcraft.Lynx.obj inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls and Associations_CWDB.xls, search for "Lynx" and replace the mesh name with Rotorcraft.Lynx.obj

I've edited the Wildcat model uploaded by AlGrant, if there's any issue I'll remove the file.

P.S. I've reached over 10 posts and waited another 7 days but I can't figure out how to add an image and an attachment to my post at the same time.

Google Drive link with the latest version of every model.
https://drive.google.com/open?id=1ICDXc ... GzJuJFdOBA
Image album with all the released models
https://imgur.com/a/hunHXuG

I've added two new models to Google drive:
HSwMS Gotland
Original model was "HMS Gotland (Gtd)" by Johan H. from 3D Warehouse
SSN Nautilus
Original model was "USS SSN-571 Nautilus" by Lazarus S. from 3D Warehouse

Google Drive link with the latest version of every model.
https://drive.google.com/open?id=1ICDXc ... GzJuJFdOBA
Image album with all the released models
https://imgur.com/a/hunHXuG

Quick question, are these unofficial models being added to the main game ? I don't have excel on this box, so editing sheets is not something I can do. However I would love to be able to use these new models

ORIGINAL: serjames

Quick question, are these unofficial models being added to the main game ? I don't have excel on this box, so editing sheets is not something I can do. However I would love to be able to use these new models

That seems to be the case, in the latest update many of the models posted here were included in the patch. Which is great btw since otherwise you have to manually edit the databases every time a new version is released.

French subs collection:

* Agosta
* Rubis mod 1 (before 1991)
* Rubis mod 2 (from 1991)
* Triomphant

(The stock models for Redoutable and Suffren/Barracuda are fine and don't need to be replaced, in my opinion).

And, as a bonus: fish school...

Le Triomphant goes fishing...

Hi,
Hope everyone is ok.
Here are the following sub (some of them made from scratch for others just updated from existing).
Succeeded to keep each .obj below 1Mo. with some details (prop, flank array…)

Watercraft.Type 212
Watercraft.Type 214
Watercraft.Collins
Watercraft.Scorpene
Watercraft.Agosta 70
Watercraft.Agosta 90B
Watercraft.Rubis
Watercraft.Suffren
Watercraft.Triomphant
Watercraft.ImprovedLA
Watercraft.LA
Watercraft.Ohio
Watercraft.Permit
Watercraft.Virginia
Watercraft.Dolphin I
Watercraft.Dolphin II
Watercraft.Gotland
Watercraft.Project 633 (class name Romeo)
Watercraft.Project 641B (class name Tango)
Watercraft.Project 667A (class name Yankee)
Watercraft.Project 667BDR (class name Delta III)
Watercraft.Project 667BDRM (class name Delta IV)
Watercraft.Project 670 (class name Charlie I)
Watercraft.Project 670M (class name Charlie II)
Watercraft.Project 671 (class name Victor I)
Watercraft.Project 671RT (class name Victor II)
Watercraft.Project 671RTM (class name Victor III)
Watercraft.Project 705 (class name Alfa)
Watercraft.Project 877 (class name Kilo)
Watercraft.Project 945 (class name Sierra I)
Watercraft.Project 945A (class name Sierra II)
Watercraft.Project 955A (class name Borei)
Watercraft.Project 971M (class name Akula III)
Watercraft.Project 971U (class name Akula II)

Copy Watercraft."class name" inside "Command - Modern Operations\Resources\Tacview\Data\Meshes"
Open Associations_DB3000.xls, search for the class name and replace the mesh name with Watercraft."class name"

With some pictures

https://ibb.co/26jM653
https://ibb.co/5cygMQY
https://ibb.co/VDm56mK
https://ibb.co/HYWP5h7
https://ibb.co/xLHR60K
https://ibb.co/Y7jvwQX
https://ibb.co/Hxt4yqz

Enjoy

Impressive, thanks!

Great job! I had a quick look at your French submarines, and they seem perfect. You could just add the first version Rubis (with a straight bow) or use mine if you want. I hope that all these magnificent models will be included in next release.

Yes, we try to include as many of these objects as possible.

FYI, BLiboy's model for Rubis (which is mod2, i.e. 1991- Rubis) is definitely better than mine . So for next release I suggest to replace Watercraft.Rubis-Mod2.obj with his Watercraft.Rubis.obj. Sorry for the confusion, but our 2 projects emerged almost at the same time.

Was wondering if you guys can make a model for the F-24 NATF combining F-22 with F-14 swing wing?

ORIGINAL: pclaurent
FYI, BLiboy's model for Rubis (which is mod2, i.e. 1991- Rubis) is definitely better than mine . So for next release I suggest to replace Watercraft.Rubis-Mod2.obj with his Watercraft.Rubis.obj. Sorry for the confusion, but our 2 projects emerged almost at the same time.

Done [:)]

ORIGINAL: FTBSS

Was wondering if you guys can make a model for the F-24 NATF combining F-22 with F-14 swing wing?

As far as I can see, F24-NATF can be represented as an F14 with rear tails somewhow tilted. You could have a look at Tinkercad (online free 3D rendering tool) and do the mod...

Hi everybody,

I also worked / reworked the following:

Watercraft.Project613.obj (Wiskey class)
Watercraft.Project641.obj (Foxtrot class)
Watercraft.Project675.obj (Echo II class)
Watercraft.Project941.obj (Typhoon class)
Watercraft.TR1700.obj (ARA Santa Cruz)

And built some chinese SS-SSN-SSGN:

Watercraft.Type039.obj (Song class)
Watercraft.Type039A.obj (Yuan class)
Watercraft.Type039C.obj (Yuan class / tapered design)
Watercraft.Type091.obj (Han class)
Watercraft.Type092.obj (Xia class)
Watercraft.Type093.obj (Shang-I class)
Watercraft.Type093A.obj (Shang-II class / tapered design)
Watercraft.Type093B.obj (Shang-III class / VLS)

Still miss some SSN but i may work on Indian / Jap / UK subs now.

Feel free to add them to your HD - Matrix Games\Command Modern Operations\Resources\Tacview\Data\Meshes

Enjoy

Hello everyone.i am new in the forum.

Finalizing a couple of Brazilian 3D models for use in CMANO.
Is there a way to add the *range* radius for AAA ingame?

Embraer R99A
Embraer R99B
SABER M60 Radar
FlakPanzer GEPARD
Oerlikon with the Skyguard