Page 11 of 14
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 4:00 pm
by ComDev
ORIGINAL: FoxZz
I've noticed a "coulour bug" in the last build.
Basically, the units considered hostile and display in red, switch to neutral/green for a few seconds before reverting to red in a totally random pattern. This bug seems only to affect visual display, since those units are still considered hostile by allied units and treated accordingly.
I cannot really provide a save since this is totally random.
Weird indeed...
Does it only affect scens with complex side setups?
Which scenarios have you noted it in? Could you start a new thread in the Tech Support forum and upload them there, so that we're using the exact same version?
Thanks!
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 4:02 pm
by ComDev
ORIGINAL: training
Yes. It looks exactly the same as the previous screenshot, with no map loaded.
Hmmm... And you've deleted the Command.ini file, so the sim is using default settings?
It almost looks like the simulator isn't loading the maps.
Did you install 1.10 first, and then unzip 1.11 on top?
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 4:09 pm
by Patmanaut
Hi guys
I have installed Build 803.
I´m sorry, I´m trying upgrade to the latest build, but I can´t find where is the download link.
Thanks for your support.
Regards
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 4:15 pm
by Gizzmoe
ORIGINAL: Patmanaut
I´m sorry, I´m trying upgrade to the latest build, but I can´t find where is the download link.
Here is the latest version:
fb.asp?m=4064235
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 5:06 pm
by training
ORIGINAL: emsoy
ORIGINAL: training
Yes. It looks exactly the same as the previous screenshot, with no map loaded.
Hmmm... And you've deleted the Command.ini file, so the sim is using default settings?
It almost looks like the simulator isn't loading the maps.
Did you install 1.10 first, and then unzip 1.11 on top?
Yep, I deleted the Command.ini file. I first updated to 1.10 from the WOTG version using the installer, then unzipped B816 and copied to the installation folder, exactly the same way I've installed dozens of other updates. It also increases the brightness of my screen when I start the program, something the previous versions don't do.
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 5:30 pm
by Patmanaut
ORIGINAL: Gizzmoe
ORIGINAL: Patmanaut
I´m sorry, I´m trying upgrade to the latest build, but I can´t find where is the download link.
Here is the latest version:
fb.asp?m=4064235
Thanks Gizzmoe!
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 6:32 pm
by ComDev
ORIGINAL: training
ORIGINAL: emsoy
ORIGINAL: training
Yes. It looks exactly the same as the previous screenshot, with no map loaded.
Hmmm... And you've deleted the Command.ini file, so the sim is using default settings?
It almost looks like the simulator isn't loading the maps.
Did you install 1.10 first, and then unzip 1.11 on top?
Yep, I deleted the Command.ini file. I first updated to 1.10 from the WOTG version using the installer, then unzipped B816 and copied to the installation folder, exactly the same way I've installed dozens of other updates. It also increases the brightness of my screen when I start the program, something the previous versions don't do.
What looks like an identical problem was reported and resolved here:
tm.asp?m=4065120
Does this help any?
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 8:05 pm
by training
The problem looks the same, but I installed 1.10 before installing B815. I was able to install B814 without any problems. My GIS folder is also full, at 3.59 GB.
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sat Apr 16, 2016 10:54 pm
by Dougolin
Playing Death of the Belgrano on Build 816, strange behavior in the Throttle and Altitude settings. If I pause the game while the Throttle and Altitude windows is open and then re-start the game, the altitude bar on the right side of the window disappears and speed will not change if I try to adjust speed using the throttle presets. In addition, instead of the number of knots appearing in the throttle box, the throttle preset word (i.e., creep or cruise, etc.) appears in the box. If I close the window and then re-open it (using F2), the window re-opens normally, but the problem will re-appear if I pause the game or go into the map and move a course waypoint.
Same problem occurs with aircraft in the Wargasm 1962 scenario.
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 3:40 am
by ComDev
ORIGINAL: Dougolin
Playing Death of the Belgrano on Build 816, strange behavior in the Throttle and Altitude settings. If I pause the game while the Throttle and Altitude windows is open and then re-start the game, the altitude bar on the right side of the window disappears and speed will not change if I try to adjust speed using the throttle presets. In addition, instead of the number of knots appearing in the throttle box, the throttle preset word (i.e., creep or cruise, etc.) appears in the box. If I close the window and then re-open it (using F2), the window re-opens normally, but the problem will re-appear if I pause the game or go into the map and move a course waypoint.
Same problem occurs with aircraft in the Wargasm 1962 scenario.
Thanks for your feedback Dougolin, next time could you open a tech support ticket? That way we won't accidently miss a post or two?
I'm not able to reproduce this. Are you selecting a waypoint to change waypoint orders (see the Speed/Alt window title, at the top) and not re-selecting the unit?
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 5:20 am
by Dimitris
Command v1.11 Release Candidate 16 - Build 817
======================================================================
Superseded by Build 818:
fb.asp?m=4066727
CHANGES/ADDITIONS FROM v1.11 RC15 - Build 816
=====================================================================
Fixed: Map-Cursor Box ("Black Box") causes weird behaviour
Tweak: Refined 'unit is considered as hostile' evaluation
Fixed: Crash in mission wake-up
Tweak: Added notification about missing map files
NOTE: Post your bug reports on the Tech Support forum. This thread is for RC announcements only!
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 7:10 am
by Sardaukar
Thanks!
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 9:47 am
by Zaslon
Thank you very much!
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 1:30 pm
by Lowlaner2012
Cheers for the effort you guys put in
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 5:50 pm
by Dougolin
Yes, I am selecting a waypoint to change the waypoint order an not re-selecting the unit
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 6:22 pm
by ComDev
Then you're in waypoint editing mode. This is by design [8D]
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Sun Apr 17, 2016 8:13 pm
by Dougolin
The once again, my compliments to all of you. B817 running quite nicely!
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Mon Apr 18, 2016 2:54 am
by ComDev
Thanks guys [8D]
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Mon Apr 18, 2016 6:08 pm
by ETF
Wow can't seem to get much running this time around coming back to CMANO
Is there a link for the 1.11. Obviously I missed a D/L as it now doesn't load any scenarios with the one I found. I think I will uninstall and try again. 3rd times the charm lol
RE: Command v1.11 Release Candidate (CURRENT: RC1 - B802)
Posted: Mon Apr 18, 2016 6:25 pm
by thewood1
Make sure you upgrade to 1.10 first. Then download the latest build that is zipped. Caopy all the files to the Command directory and tell it to replace files.
And frankly, if you can't handle that, stick with the official 1.10 release. It will save you time and aggravation.