Page 152 of 323
RE: WitPTracker AE Release 1.8 Available!
Posted: Sat Nov 12, 2011 10:37 pm
by floydg
ORIGINAL: commissarhanish
I haven't even been able to get past this screen to load any turns.
Delete any trackerdb.* files, make sure you have the latest beta DLL and then try running it again.
RE: WitPTracker AE Release 1.8 Available!
Posted: Sat Nov 12, 2011 11:59 pm
by n01487477
I'm sure it is the wrong dll being used by both of you ... BUT
When you guys talk about latest Java version - you mean Ver6.29 right? Ver7 has / had a problem.
RE: WitPTracker AE Release 1.8 Available!
Posted: Sun Nov 13, 2011 12:20 pm
by commissarhanish_MatrixForum
Yes 6.29 is running.
I will check dll and report back asap
RE: WitPTracker AE Release 1.8 Available!
Posted: Sun Nov 13, 2011 12:36 pm
by castor troy
No idea what a dll is but I´m running java version 6 update 29.
RE: WitPTracker AE Release 1.8 Available!
Posted: Sun Nov 13, 2011 1:00 pm
by n01487477
ORIGINAL: castor troy
No idea what a dll is but I´m running java version 6 update 29.
RE: WitPTracker AE Release 1.8 Available!
Posted: Sun Nov 13, 2011 2:09 pm
by castor troy
If I understood that correctly, have copied the dll from the AE folder into the tracker folder. Result is the same unfortunately. [:(]
RE: WitPTracker AE Release 1.8 Available!
Posted: Sun Nov 13, 2011 5:05 pm
by floydg
ORIGINAL: castor troy
If I understood that correctly, have copied the dll from the AE folder into the tracker folder. Result is the same unfortunately. [:(]
Remove all of the trackerdb.* files first and then try again.
RE: WitPTracker AE Release 1.8 Available!
Posted: Sun Nov 13, 2011 10:54 pm
by n01487477
ORIGINAL: floydg
ORIGINAL: castor troy
If I understood that correctly, have copied the dll from the AE folder into the tracker folder. Result is the same unfortunately. [:(]
Remove all of the trackerdb.* files first and then try again.
What floyd said + NOT the AE folder the AE/Beta2 folder
RE: WitPTracker AE Release 1.8 Available!
Posted: Mon Nov 14, 2011 12:49 am
by commissarhanish_MatrixForum
That did the trick. Thanks guys!
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 10:06 am
by castor troy
now that I´ve deleted all trackerdb.* files I think I am one step further, next error pops up though.
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 10:53 am
by floydg
ORIGINAL: castor troy
now that I´ve deleted all trackerdb.* files I think I am one step further, next error pops up though.
It appears that the ship classes were not read in properly. Are you sure you're using the correct DLL (from the beta2 folder)?
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 11:25 am
by castor troy
oh sorry, my bad. Thought I´ve already copied the beta2 dll but apparantly I haven´t. Works fine now.
thanks again floyd and n01487477 for that great tool and your support.[&o]
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 11:32 am
by castor troy
sorry to be a pain, one more question.
I´ve used an earlier tracker version for my last PBEM and back then it showed me regions like China, India, etc. Now when I want to check "regions" I only get Japan, which shows all my bases. Now I´m the Allied player and it shows my Allied bases when I click on Japan. Have I done anything wrong or do I have to "create" my regions somehow?
thx
edit: just found the explanation on your homepage. pls disregard. [:)]
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 11:37 am
by castor troy
ok, another question. Are the "default" regions of earlier tracker versions still available somewhere? I know how to create regions now but it probably would take me two and a halve days to look at the map, write down all the bases and then put them together to regions for tracker. For me, the regions that came with earlier versions were just absolutely fine. [&:]
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 11:40 am
by n01487477
ORIGINAL: castor troy
ok, another question. Are the "default" regions of earlier tracker versions still available somewhere? I know how to create regions now but it probably would take me two and a halve days to look at the map, write down all the bases and then put them together to regions for tracker. For me, the regions that came with earlier versions were just absolutely fine. [&:]
Premade Region files are in the regioin-mapping folder. I'd use Kulls, as a starting point. File->Import Base-region file
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 11:48 am
by castor troy
ORIGINAL: n01487477
ORIGINAL: castor troy
ok, another question. Are the "default" regions of earlier tracker versions still available somewhere? I know how to create regions now but it probably would take me two and a halve days to look at the map, write down all the bases and then put them together to regions for tracker. For me, the regions that came with earlier versions were just absolutely fine. [&:]
Premade Region files are in the regioin-mapping folder. I'd use Kulls, as a starting point. File->Import Base-region file
perfect, thanks again
RE: WitPTracker AE Release 1.8 Available!
Posted: Tue Nov 15, 2011 5:05 pm
by obvert
So, I am running the latest beta, 1108r2.
Is it possible to run tracker? I've read a few posts here, and tried copying the suggested files into the main tracker folder, then double clicking on the exec jar file. I am more mac friendly, though I use a PC for AE, and I'm not even sure if I'm choosing the right file to run the program.
If it's possible, and it's not too much trouble, could you post a quick step by step approach to getting tracker running without abrieviations for file names? Sorry I'm so PC illiterate.
Thanks
RE: WitPTracker AE Release 1.8 Available!
Posted: Wed Nov 16, 2011 1:00 am
by floydg
ORIGINAL: obvert
So, I am running the latest beta, 1108r2.
Is it possible to run tracker? I've read a few posts here, and tried copying the suggested files into the main tracker folder, then double clicking on the exec jar file. I am more mac friendly, though I use a PC for AE, and I'm not even sure if I'm choosing the right file to run the program.
If it's possible, and it's not too much trouble, could you post a quick step by step approach to getting tracker running without abrieviations for file names? Sorry I'm so PC illiterate.
Thanks
If you're going to double-click something, double-click the WitPTracker.bat file. Did you read the set-up instructions (
http://sites.google.com/site/witptracker/set-up)?
RE: WitPTracker AE Release 1.8 Available!
Posted: Wed Nov 16, 2011 10:34 am
by obvert
quote:
ORIGINAL: obvert
So, I am running the latest beta, 1108r2.
Is it possible to run tracker? I've read a few posts here, and tried copying the suggested files into the main tracker folder, then double clicking on the exec jar file. I am more mac friendly, though I use a PC for AE, and I'm not even sure if I'm choosing the right file to run the program.
If it's possible, and it's not too much trouble, could you post a quick step by step approach to getting tracker running without abrieviations for file names? Sorry I'm so PC illiterate.
Thanks
If you're going to double-click something, double-click the WitPTracker.bat file. Did you read the set-up instructions (
http://sites.google.com/site/witptracker/set-up)?
Thanks. Judging by your positive response, I assume then it is possible to run tracker even with the newest betas.
I just didn't know where to find those instructions. That should help. I'll give it all a try later when home and ask again if I have problems.
RE: WitPTracker AE Release 1.8 Available!
Posted: Wed Nov 16, 2011 11:31 am
by floydg
ORIGINAL: obvert
quote:
ORIGINAL: obvert
So, I am running the latest beta, 1108r2.
Is it possible to run tracker? I've read a few posts here, and tried copying the suggested files into the main tracker folder, then double clicking on the exec jar file. I am more mac friendly, though I use a PC for AE, and I'm not even sure if I'm choosing the right file to run the program.
If it's possible, and it's not too much trouble, could you post a quick step by step approach to getting tracker running without abrieviations for file names? Sorry I'm so PC illiterate.
Thanks
If you're going to double-click something, double-click the WitPTracker.bat file. Did you read the set-up instructions (
http://sites.google.com/site/witptracker/set-up)?
Thanks. Judging by your positive response, I assume then it is possible to run tracker even with the newest betas.
I just didn't know where to find those instructions. That should help. I'll give it all a try later when home and ask again if I have problems.
Yes, it runs under the newest betas. The next release will work better with respect to the bigger pilot pool.
Those instructions are on the same site as where you downloaded the program... [:D]
If you're still having problems, you know where to find us.