Page 3 of 4
RE: Error Reporting
Posted: Wed Sep 07, 2016 9:39 am
by Benedict151
Hello RickEAllen
"have to say, this modding team is amazing. Several times I've discovered what I thought was a problem, only to
research through the posts to discovery someone else had already found it. Members of the team have also found
problems I totally missed."
Seconded
regards
Ben Wilkins
RE: Error Reporting
Posted: Fri Sep 09, 2016 6:34 pm
by BillRunacre
ORIGINAL: RickEAllen
I have to say, this modding team is amazing. Several times I've discovered what I thought was a problem, only to research through the posts to discovery someone else had already found it. Members of the team have also found problems I totally missed.
My hat is off to every member of this beta team. When this game is released it going to kick butt.
Agreed, lots of great feedback which helps considerably! [:)]
RE: Error Reporting
Posted: Thu Sep 15, 2016 3:22 pm
by ludi18671
First report here. Overall the game (1.09) is working well against the AI. I figured out the forced march and cruise aspects, and my only comment here is that there should be a "surfaced" speed for subs GREATER than 20 hexes...the sub would be more vulnerable but it would move a LOT faster. Essentially all early war U-boats were submersibles that only dove from time to time.
I also found the font for Axis (especially German) hard to see in winter...perhaps they should be outlined or something? Anyway, there is a potential problem there.
Overall this is a great game with lots of WW II flavour.
RE: Error Reporting
Posted: Thu Sep 15, 2016 5:17 pm
by corneliul
Hi Hubert. I had an error after about 5 min from start, i think 3rd turn.
I had the StickyNotes from windows 10 running in backround because i wrote down the first impressions and program crashed.
After i restarted the game without Stickynotes or other program running and played 2 hours without
any error. I'll try tomorrow trying to repeat with other programs too running in background.
Here error report...
RE: v1.00.07_Crash
Posted: Thu Sep 15, 2016 5:20 pm
by corneliul
Ohh...i see other had same error in turn 3...i right clicked on a Bomber.I had same error like TheBattlefield.
RE: v1.00.07_Crash
Posted: Thu Sep 15, 2016 10:39 pm
by Hubert Cater
Thanks everyone and if you can, please post at least a screenshot of the error or the contents of the errorlog.txt found in the ERROR folder of your USER folder for the game. The reason I ask is that I've turned on the debug mode for the game again and it will output a pretty detailed error report that will help me track down the bugs.
Typical folder path for the user file area of the game on your system:
C:\Users\<username>\Documents\My Games\Strategic Command - WWII War In Europe
Thanks,
Hubert
RE: v1.00.07_Crash
Posted: Fri Sep 16, 2016 11:47 pm
by corneliul
Another error after hours of playing smooth...no fog of war.
RE: v1.00.07_Crash
Posted: Sun Sep 18, 2016 3:16 am
by sPzAbt653
Got the pictured error when zooming back in from max out zoom. The error log contained only the following line:
[09/18/2016 1:13:28; 6.1.7601; 1280x1024x32(1); v1.00.09 Beta] FAILED(initialize_weather_border_surface): Segmentation violation
RE: v1.00.07_Crash
Posted: Sun Sep 18, 2016 11:09 am
by Ostwindflak
First error I have ever encountered:
[09/18/2016 8:49:30; 6.0.6002; 1920x1080x32(1); v1.00.09 Beta] FAILED(draw_unit_layer_to_buffer): -------------------------------------------------------------------------------
Class / Object Routine Nature of exception Effect
-------------------------------------------------------------------------------
MAIN_WINDOW draw_unit_layer_to_buffer @24
<0000000004D31128> (From GAME_DRAW_WINDOW)
Feature call on void target. Fail
-------------------------------------------------------------------------------
MAIN_WINDOW draw_unit_layer_to_buffer @24
<0000000004D31128> (From GAME_DRAW_WINDOW)
Routine failure. Fail
-------------------------------------------------------------------------------
MAIN_WINDOW draw_map_to_buffer @32
<0000000004D31128> (From GAME_DRAW_WINDOW)
Routine failure. Fail
-------------------------------------------------------------------------------
MAIN_WINDOW draw_map_to_screen @2
<0000000004D31128> (From GAME_DRAW_WINDOW)
Routine failure. Fail
-------------------------------------------------------------------------------
MAIN_WINDOW on_right_button_down @396
<0000000004D31128> Routine failure. Fail
-------------------------------------------------------------------------------
MAIN_WINDOW window_process_message @16
<0000000004D31128> (From WEL_WINDOW) Routine failure. Fail
-------------------------------------------------------------------------------
MAIN_WINDOW process_message @23
<0000000004D31128> (From WEL_COMPOSITE_WINDOW)
Routine failure. Fail
-------------------------------------------------------------------------------
WEL_DISPATCHER window_procedure @8
<0000000004D321B4> (From WEL_ABSTRACT_DISPATCHER)
Routine failure. Fail
-------------------------------------------------------------------------------
APPLICATION message_loop @55
<0000000004D3219C> (From WEL_APPLICATION) Routine failure. Fail
-------------------------------------------------------------------------------
APPLICATION run @10
<0000000004D3219C> (From WEL_APPLICATION) Routine failure. Fail
-------------------------------------------------------------------------------
APPLICATION make @9
<0000000004D3219C> (From WEL_APPLICATION) Routine failure. Fail
-------------------------------------------------------------------------------
APPLICATION root's creation
<0000000004D3219C> Routine failure. Exit
-------------------------------------------------------------------------------
Sorry for having to copy and paste it. I thought I took a screen shot of it, but apparently I did not. I right clicked on the German 10th Army in land hex 185,81 (1 hex SE of Krakow) on turn 2 and selected "reinforce" and that is when the error popped up and the game crashed to desktop.
I went back into the game and tried it again to see if it is repeatable and it was not. I was able to reinforce 10th Army and every other unit without problems.
Using latest beta version 1.00.09, playing Axis on Expert.
v1.00.09_Crash
Posted: Sun Sep 18, 2016 7:28 pm
by ludi18671
Hi
I just had a crash in version 1.09. It was in late September 1940, the turn after France fell (well, agreed to an armistice). I clicked on a tactical bomber in the UK and attempted to right click for its properties, and the game crashed at that point. I was unable to take a screenshot. I (hopefully) have included the error report with the report. Oops, I was UNABLE to load the error file because Matrix said there was a problem....
Cheers
ludi
RE: v1.00.09_Crash
Posted: Mon Sep 19, 2016 8:16 am
by Benedict151
Hello ludi8671
Please can you try mailing the crash details and error report to Hubert directly at
hcater@furysoftware.com
Many thanks
Ben Wilkins
RE: v1.00.09_Crash
Posted: Mon Sep 19, 2016 2:53 pm
by Philippeatbay
I'm getting a fatal lock-up by left-clicking twice on a submarine to put it in cruise mode and using the control key to select the path. I've gotten this in two different scenarios so it seems to be engine related. I haven't tried cruising without using the control key, and don't know if it effects anything besides submarines.
Update: Cruising without using the control key doesn't seem to cause any problems. Cruising with the control key causes very long lock-ups. I don't know if the freeze will eventually resolve itself because I generally give up after about two minutes. Type of ship used doesn't seem to matter, what matters is whether or not you try to use the control key.
RE: v1.00.09_Crash
Posted: Thu Sep 29, 2016 9:34 pm
by ludi18671
Hi
I am playing (or trying to) version 1.10. It is the third allied turn (I started a game as the Allies) and I am unable to end the turn, or access any of the research or other maps. The Game has NOT crashed, but this is probably just as bad!
Cheers
RE: v1.00.09_Crash
Posted: Thu Sep 29, 2016 10:53 pm
by snowstorm
After downloading and installing the latest version 1.10, I started playing a saved game for 1941 and discovered a tactical bomber for USA that could be upgraded was upgradable to an infinite number for all attributes (example: long range tech could be upgradable to whatever I wished (grade level 15 anyone?)instead of just the level 3 it just reached for technology).
[8D] [&:]
RE: v1.00.09_Crash
Posted: Fri Sep 30, 2016 1:48 pm
by Hubert Cater
ORIGINAL: ludi18671
Hi
I am playing (or trying to) version 1.10. It is the third allied turn (I started a game as the Allies) and I am unable to end the turn, or access any of the research or other maps. The Game has NOT crashed, but this is probably just as bad!
Cheers
Is it possible you pressed the F4 key? This will hide much of the UI and something I forgot to disable as I was using it for some screenshots when I didn't want the UI shown.
Pressing the F4 key again will bring the UI back on screen.
RE: v1.00.09_Crash
Posted: Fri Sep 30, 2016 1:48 pm
by Hubert Cater
ORIGINAL: snowstorm
After downloading and installing the latest version 1.10, I started playing a saved game for 1941 and discovered a tactical bomber for USA that could be upgraded was upgradable to an infinite number for all attributes (example: long range tech could be upgradable to whatever I wished (grade level 15 anyone?)instead of just the level 3 it just reached for technology).
[8D] [&:]
Thanks and the hotfix should correct this now.
RE: v1.00.09_Crash
Posted: Fri Sep 30, 2016 1:50 pm
by Hubert Cater
ORIGINAL: Philippe at bay
I'm getting a fatal lock-up by left-clicking twice on a submarine to put it in cruise mode and using the control key to select the path. I've gotten this in two different scenarios so it seems to be engine related. I haven't tried cruising without using the control key, and don't know if it effects anything besides submarines.
Update: Cruising without using the control key doesn't seem to cause any problems. Cruising with the control key causes very long lock-ups. I don't know if the freeze will eventually resolve itself because I generally give up after about two minutes. Type of ship used doesn't seem to matter, what matters is whether or not you try to use the control key.
Thanks and this should be fixed now on my end for the next release.
RE: v1.00.09_Crash
Posted: Sat Oct 01, 2016 3:59 am
by jpinard
I accidentally left-clicked while the AI was taking it's turn and it locked up the game. Sorry I forgot to take a screenshot, but here is the error log.
RE: v1.00.09_Crash
Posted: Wed Oct 05, 2016 1:11 am
by ludi18671
Hi
I TRIED to play SC 3 tonight, but so far I have had the game quit on me twice. I am TRYING to play as the Allies in the full campaign. The first time I reloaded an old save and the game stopped working when I tried to move a British Light Cruiser to one on the Shetland Islands. There is no error file (not for this crash) and I did not use the F4 key.
The Second time that the game crashed I had started the game anew, as an Allied campaign, and this time the game stopped working when I tried to move a British destroyer (into the Atlantic).
RE: v1.00.09_Crash
Posted: Wed Oct 05, 2016 3:18 pm
by jpinard
ORIGINAL: ludi18671
Hi
I TRIED to play SC 3 tonight, but so far I have had the game quit on me twice. I am TRYING to play as the Allies in the full campaign. The first time I reloaded an old save and the game stopped working when I tried to move a British Light Cruiser to one on the Shetland Islands. There is no error file (not for this crash) and I did not use the F4 key.
The Second time that the game crashed I had started the game anew, as an Allied campaign, and this time the game stopped working when I tried to move a British destroyer (into the Atlantic).
I'm playing the 1.10 version of the game (without the hotfix) to finish a campaign. If I need to try something different I "quit" to the menu then go to reload the game... then I lockup. I've found that once the game gets in a crash state something is not resetting in memory and I need to quit the game to desktop which fixes it.
But... in past versions I had to reboot my computer. So I'd suggest trying a clean boot to see if you crash again. Otherwise there may be something in that savefile that is incompatible with the latest version of the game. Once I had the game save a unit in the wrong position and when I tried to move it upon reloading the game would crash. I hope this helps a little.