Page 4 of 5
RE: Strategic Command WWII: Community Content
Posted: Thu Oct 26, 2017 5:23 pm
by Scarz
I installed the new scenarios, seems like they go to a different location than the base game, and while they look good, the time it takes the computer to play a turn of Calm Before the Storm makes it almost unplayable. Is this increased time a product of the scenarios location?
Thanks.
Scar
RE: Strategic Command WWII: Community Content
Posted: Fri Oct 27, 2017 10:45 am
by Hubert Cater
Hi Scarz,
The time difference is simply due to the size of that particular mod and the number of extra events that mod contains.
You could always try a smaller mod such as the Advanced Third Reich mod to compare.
RE: Strategic Command WWII: Community Content
Posted: Sun Oct 29, 2017 12:40 pm
by jelelo94
ORIGINAL: Hubert Cater
ORIGINAL: ILCK
I saw the post discussing that it would save any existing user-made campaigns but I am not sure where that would be. I see nothing in my folder C:\Program Files (x86)\Steam\SteamApps\common\Strategic Command WWII War in Europe that looks like what I would expect to be this save of other campaign.
Hi ILCK,
If you navigate to the following folder you should see a BACKUP of the previous CAMPAIGNS folder, hopefully this helps:
C:\Users\<username>\Documents\My Games\Strategic Command WWII - War In Europe\
Just copy/paste any from the backup CAMPAIGNS folder over to this folder and it should work fine after that:
C:\Users\<username>\Documents\My Games\Strategic Command WWII - War In Europe\Campaigns
Hubert
Hi Hubert.
Finally!! I can play now without the new sprites, but at least it works.
Thank you very much.
RE: Strategic Command WWII: Community Content
Posted: Sun Oct 29, 2017 2:14 pm
by Rake
ORIGINAL: AZKGungHo
Hey all,
I LOVE the fact you put this package together, it's great. But it's not working properly. I have my SC installed as usual and installed this package the same way. Yet when I pick any of the Mods to play I get the message below. When attempting to play I can't get any dialog when I right click on any units I control either.
Help!
I'm getting the same warning for all of the community pack games. I have checked and I do have the correct installer downloaded.
I have the Matrix version of the game; I do not use Steam unless that's the only way a game is offered. I also have the game on my D: drive. My C: drive is a boot disk and all storage is on D: My Documents folder is on the C drive, but this is the only SC data stored here.
The computer I'm trying to load this pack onto is Win 10. I have not yet tried to put it on my Win 7 computer, as I share that with my wife and gaming time on there is limited. But, I had the same issue when trying to install only the Fall Weiss mod on the Win 10 computer. I had no problems at all installing Fall Weiss on the Win 7 machine.
My suspicion is that, due to the dual drive setup on my Win 10 computer, the game is having trouble finding the mods. I will download this onto the other computer and see if there are any issues with that install.
FYI, I have another (Win 10) laptop which also had problems with the Fall Weiss mod
RE: Strategic Command WWII: Community Content
Posted: Sun Oct 29, 2017 2:59 pm
by Rake
ORIGINAL: Rake
ORIGINAL: AZKGungHo
Hey all,
I LOVE the fact you put this package together, it's great. But it's not working properly. I have my SC installed as usual and installed this package the same way. Yet when I pick any of the Mods to play I get the message below. When attempting to play I can't get any dialog when I right click on any units I control either.
Help!
I'm getting the same warning for all of the community pack games. I have checked and I do have the correct installer downloaded.
I have the Matrix version of the game; I do not use Steam unless that's the only way a game is offered. I also have the game on my D: drive. My C: drive is a boot disk and all storage is on D: My Documents folder is on the C drive, but this is the only SC data stored here.
The computer I'm trying to load this pack onto is Win 10. I have not yet tried to put it on my Win 7 computer, as I share that with my wife and gaming time on there is limited. But, I had the same issue when trying to install only the Fall Weiss mod on the Win 10 computer. I had no problems at all installing Fall Weiss on the Win 7 machine.
My suspicion is that, due to the dual drive setup on my Win 10 computer, the game is having trouble finding the mods. I will download this onto the other computer and see if there are any issues with that install.
FYI, I have another (Win 10) laptop which also had problems with the Fall Weiss mod
As I suspected, the Community Pack runs perfectly on the Win 7 computer. The Fall Weiss mod installed and ran perfectly from the day I loaded it on the same computer. I'm guessing that the game has problems finding files when they're located on different drives
My problem on my Win 10 computer is that the boot (C:) drive has very little available space. Were it an option, I would have placed nothing on this drive beyond the OS and Photoshop. Unfortunately, several games require mods to be stored in My Documents on the boot drive which has nearly filled this disk.
RE: Strategic Command WWII: Community Content
Posted: Sun Oct 29, 2017 4:47 pm
by Icier
I have the same problem for all my community loaded files. [&:][&:]
RE: Strategic Command WWII: Community Content
Posted: Mon Oct 30, 2017 10:45 am
by Hubert Cater
For those still having issues, I would make a backup of the current 'Campaigns' folder, then delete it, and try reinstalling from a fresh download of the community pack found here:
http://ftp.matrixgames.com/pub/Strategi ... -v1.10.zip
The path to the campaigns folder is typically here on most systems:
C:\Users\<WindowsUserName>\Documents\My Games\Strategic Command WWII - War In Europe\Campaigns
I just suggest this as the missing INI file issue is something that was definitely a problem with the initial release of the community pack, but should be resolved with the latest download link shown above.
Hubert
RE: Strategic Command WWII: Community Content
Posted: Tue Oct 31, 2017 12:07 am
by kessler1975
got this error Failed(initialize, morale,surface,flags etc)segmentation violation when loading Advanced third reich 41.
RE: Strategic Command WWII: Community Content
Posted: Tue Oct 31, 2017 10:32 am
by Hubert Cater
Another player has reported this error as well and we are not really sure why as it seems to be machine specific at the moment. One way to avoid this error is to navigate to the following folder on your end:
C:\Users\<username>\Documents\My Games\Strategic Command WWII - War In Europe\Campaigns\_Advanced Third Reich 1941 Scenario
Then open the campaign.ini file and change the following line to this:
#CUSTOM_BITMAPS= 0
This will turn off the custom bitmaps but it should allow you to then play the mod.
RE: Strategic Command WWII: Community Content
Posted: Wed Nov 01, 2017 10:47 pm
by kessler1975
it's working now, thank you.
RE: Strategic Command WWII: Community Content
Posted: Wed Nov 08, 2017 7:43 pm
by Rake
ORIGINAL: Hubert Cater
For those still having issues, I would make a backup of the current 'Campaigns' folder, then delete it, and try reinstalling from a fresh download of the community pack found here:
http://ftp.matrixgames.com/pub/Strategi ... -v1.10.zip
The path to the campaigns folder is typically here on most systems:
C:\Users\<WindowsUserName>\Documents\My Games\Strategic Command WWII - War In Europe\Campaigns
I just suggest this as the missing INI file issue is something that was definitely a problem with the initial release of the community pack, but should be resolved with the latest download link shown above.
Hubert
This worked... Thanks, Hubert
RE: Strategic Command WWII: Community Content
Posted: Wed Jan 03, 2018 5:17 pm
by KorutZelva
For steam users, will the latest version of the campaign update eventually?
RE: Strategic Command WWII: Community Content
Posted: Thu Jan 04, 2018 4:16 pm
by Hubert Cater
It should have already been updated automatically as both Steam and Matrix currently have the latest versions of the Community Packs. If not let me know.
RE: Strategic Command WWII: Community Content
Posted: Thu Jan 04, 2018 5:01 pm
by KorutZelva
My current pbem opponent told me the downloadable community pack had the 10.1 version of Fall Weiss II but on steam I'm still with 9.1.
RE: Strategic Command WWII: Community Content
Posted: Thu Jan 04, 2018 6:30 pm
by crispy131313
Fall Weiss 10.1 is currently only available via my dropbox link. I have not submitted a version newer then 9.1 to the Community Pack.
RE: Strategic Command WWII: Community Content
Posted: Thu Jan 04, 2018 7:11 pm
by KorutZelva
gotcha! False alarm, Hubert!
RE: Strategic Command WWII: Community Content
Posted: Thu Jan 04, 2018 9:22 pm
by nnason
Crispy131313,
I am playing 10.1 as the Axis.
It is July 7, 1940 and France falls. I am playing with different strategies and I noticed second time got very different amount to plunder. So I did a bunch of times. Most likely was around 1,000 but had values as low as 920 and as high as 1140. Is this normal for there to be a 20% variation between the low and the high amount?
Would this be the same for the standard 1939 scenario?
RE: Strategic Command WWII: Community Content
Posted: Fri Jan 05, 2018 11:24 am
by crispy131313
ORIGINAL: nnason
Crispy131313,
I am playing 10.1 as the Axis.
It is July 7, 1940 and France falls. I am playing with different strategies and I noticed second time got very different amount to plunder. So I did a bunch of times. Most likely was around 1,000 but had values as low as 920 and as high as 1140. Is this normal for there to be a 20% variation between the low and the high amount?
Would this be the same for the standard 1939 scenario?
This is not my shenanigans it's part of the game. I think one of the variables is how many surrendering units are left on the map. The less equipment you destroy the more you can re-commission type of thing.
RE: Strategic Command WWII: Community Content
Posted: Sat Feb 24, 2018 12:01 pm
by ikrananka
Is the community pack being updated to play under v1.12, or does it work in this version already?
RE: Strategic Command WWII: Community Content
Posted: Mon Feb 26, 2018 1:48 pm
by Hubert Cater
As the v1.12 update is mostly default campaign corrections and bug fixes for the game engine, the Community Pack is unaffected and not in need of related updating. It will simply work with the latest update as is.