Page 33 of 130
RE: Quick Questions Thread
Posted: Sat May 29, 2021 4:13 am
by Hardradi
ORIGINAL: herbertsaupe
Hello everybody,
have seen some strange things with freight supply missions via germans Ju 52.
Im in turn 24, Germans, snow and blizzard are the weather conditions.
I wanted to supply my dugged in front troops with aditional fright via air supply.
I only let them fly to airbases near the front and on my side, some 10 hexes away from russian airbases. Everytime i do this, russian interceptors come over them and hit them badly.
1. Why can they intercept my Ju 52 s, that are staying many miles away from the front. Totally unhistorical and unlogical. Only the germans did „freie Jagd“ on russian side of the front, because of their big advantage at this time.
2. I dont understand, how to get escorts protecting them. I tried everything. Fighters on the target base, fighters all nearby the flight path, on the start base, long range Me 110 in range.
But nearly never a escort shows up. And the russians everytime like 50 fighters...in blizzard!!!
Have i missed something? Help needed.
Or is it a bug?
I had the same problems and a few other people have complained about this as well. Do you have a save that you can pass to the 2by3 guys?
RE: Quick Questions Thread
Posted: Sun May 30, 2021 7:16 am
by nukkxx5058
What exactly does "toggle ground support on/off {x}" does and why should I care ?
Thank you.
RE: Quick Questions Thread
Posted: Sun May 30, 2021 8:31 am
by loki100
ORIGINAL: nukkxx5058
What exactly does "toggle ground support on/off {x}" does and why should I care ?
Thank you.
it really does what it says. If on, bombers in GS directives will be committed, if off those bombers won't.
you have a very finite resource so flipping that button on/off means your bombers are used for the battles you deem to be critical.
if you turn it off at the end of your phase then you get no GS in the enemy turn, this can be useful if you think you are overmatched but equally GS is always good.
The point about GS is the air attacks are first in each battle, disrupted elements don't fight, don't count for win/loss and may well be vulnerable to becoming destroyed or damaged in the actual battle.
read the rules in 18.1.3 for how fighters are allocated to GS battles, its different to the routine for bomber allocation.
RE: Quick Questions Thread
Posted: Sun May 30, 2021 11:13 am
by nukkxx5058
ORIGINAL: loki100
ORIGINAL: nukkxx5058
What exactly does "toggle ground support on/off {x}" does and why should I care ?
Thank you.
it really does what it says. If on, bombers in GS directives will be committed, if off those bombers won't.
you have a very finite resource so flipping that button on/off means your bombers are used for the battles you deem to be critical.
if you turn it off at the end of your phase then you get no GS in the enemy turn, this can be useful if you think you are overmatched but equally GS is always good.
The point about GS is the air attacks are first in each battle, disrupted elements don't fight, don't count for win/loss and may well be vulnerable to becoming destroyed or damaged in the actual battle.
read the rules in 18.1.3 for how fighters are allocated to GS battles, its different to the routine for bomber allocation.
18.1.3 for how
Wow ! Thank you.
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Sun May 30, 2021 12:40 pm
by username01
1. What is the correct key for checking for Partisans? (ctrl + 1 just gives me order of battle screen)
2. When can I start playing Finland?
Cheers.
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Sun May 30, 2021 12:51 pm
by loki100
ORIGINAL: username01
1. What is the correct key for checking for Partisans? (ctrl + 1 just gives me order of battle screen)
2. When can I start playing Finland?
Cheers.
you see their effect via the on-map interdiction display. You can see if you are meeting the requirements of the garrison via that Theatre box (being in excess is good as it lowers the effect of partisans)
you can't play Finland directly at the moment, their forces (& the whole Continuation War) are handled using the Theatre Box system
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Sun May 30, 2021 1:42 pm
by username01
Got it, Thanks for the quick help.
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Sun May 30, 2021 1:50 pm
by juv95hrn
My Black Sea Air HQ, can only do naval mission on Baltic Sea Ports. "Baltic Sea" is grayed out, so I cant choose another body of water. How can I make it perform Naval Missions in the Black Sea instead? Thanks!
EDIT:
By transfering the Army HQ into another Superior HQ, the Black Sea ports opened up as options, why is this?
Also I cant pick German occupied ports, but only friendly ones. Why? Is this WAD?
Thanks again!
EDIT 2:
Why isnt the Black Sea Air Command available to set air directives to? Baltic Air command is, without any air groups attached. But the Black Sea HQ has air groups. How do I give Naval Directives to it?
Orel Air Command is white, has no Air HQ, but is following Orel M.D. Is it not active because Orel M.D is still locked in place?
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Sun May 30, 2021 4:34 pm
by username01
I can't seem to find any video/sound & windows mode settings? I need to go to windowed mode in order to access my snip & sketch from my taskbar, so as to take a screenshot to show why there are no partisan units showing on my map...thanks again.
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Sun May 30, 2021 4:57 pm
by nukkxx5058
ORIGINAL: username01
I can't seem to find any video/sound & windows mode settings? I need to go to windowed mode in order to access my snip & sketch from my taskbar, so as to take a screenshot to show why there are no partisan units showing on my map...thanks again.
Fullscreen or windowed mode is set in the very first line of the 'preference' screen that you can find in the 'admin' tab. (or press {shift-p} )
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Sun May 30, 2021 6:57 pm
by juv95hrn
Why are some of my Soviet Air Commands not coloured the same as their Front attached to? Bug or something I missed?
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Mon May 31, 2021 9:26 am
by username01
ORIGINAL: nukkxx5058
ORIGINAL: username01
I can't seem to find any video/sound & windows mode settings? I need to go to windowed mode in order to access my snip & sketch from my taskbar, so as to take a screenshot to show why there are no partisan units showing on my map...thanks again.
Fullscreen or windowed mode is set in the very first line of the 'preference' screen that you can find in the 'admin' tab. (or press {shift-p} )
Thanks, i can now access the task bar and also the PDF Manual...thanks.
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Mon May 31, 2021 10:40 am
by loki100
ORIGINAL: juv95hrn
My Black Sea Air HQ, can only do naval mission on Baltic Sea Ports. "Baltic Sea" is grayed out, so I cant choose another body of water. How can I make it perform Naval Missions in the Black Sea instead? Thanks!
EDIT:
By transfering the Army HQ into another Superior HQ, the Black Sea ports opened up as options, why is this?
Also I cant pick German occupied ports, but only friendly ones. Why? Is this WAD?
Thanks again!
EDIT 2:
Why isnt the Black Sea Air Command available to set air directives to? Baltic Air command is, without any air groups attached. But the Black Sea HQ has air groups. How do I give Naval Directives to it?
Orel Air Command is white, has no Air HQ, but is following Orel M.D. Is it not active because Orel M.D is still locked in place?
ok I've taken a fresh game and I can do everything you say I can't
so Black Sea Fleet air, set a manual naval patrol AD;
or use the AI assist, note this includes both Baltic and Black Sea targets (did you scroll down the list?)
Orel air command matches Orel MD for colour scheme
Baltic air command, target Danzig which is German
Soviet long range air commands start white.
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Mon May 31, 2021 2:50 pm
by juv95hrn
ORIGINAL: loki100
ORIGINAL: juv95hrn
My Black Sea Air HQ, can only do naval mission on Baltic Sea Ports. "Baltic Sea" is grayed out, so I cant choose another body of water. How can I make it perform Naval Missions in the Black Sea instead? Thanks!
EDIT:
By transfering the Army HQ into another Superior HQ, the Black Sea ports opened up as options, why is this?
Also I cant pick German occupied ports, but only friendly ones. Why? Is this WAD?
Thanks again!
EDIT 2:
Why isnt the Black Sea Air Command available to set air directives to? Baltic Air command is, without any air groups attached. But the Black Sea HQ has air groups. How do I give Naval Directives to it?
Orel Air Command is white, has no Air HQ, but is following Orel M.D. Is it not active because Orel M.D is still locked in place?
ok I've taken a fresh game and I can do everything you say I can't
so Black Sea Fleet air, set a manual naval patrol AD;
or use the AI assist, note this includes both Baltic and Black Sea targets (did you scroll down the list?)
Orel air command matches Orel MD for colour scheme
Baltic air command, target Danzig which is German
Soviet long range air commands start white.
I started my game in an earlier version 1.00. Maybe its due to having upgraded my game.
Yes, I did scroll down the list, and the Black Sea targets arent there, unless I attach the BS HQ to Southern Air command. Its colour wont change though.
Also the 3rd BAK Air corps is coloured pink like Southern Front, instead of white, but that is a confirmed bug from 1.00.
Thanks for checking, seems I have to live with these bugs for now...
EDIT:
I solved it. I didnt have the Orel Air Command HQ and the Baltic Sea Fleet Air HQ on the map. They were in the reserve. I am sure this will fix it, thanks and sorry.
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Mon May 31, 2021 3:38 pm
by juv95hrn
I have 5 Armies in the Soviet Reserves (4,8, 27, 33, 34) that I cant transfer back onto the map. They arrived in the Reserves this turn, are they locked there until next turn? Is this WAD due to reorganizing? How can I see when they are available? Thanks!
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Mon May 31, 2021 5:54 pm
by loki100
ORIGINAL: juv95hrn
I have 5 Armies in the Soviet Reserves (4,8, 27, 33, 34) that I cant transfer back onto the map. They arrived in the Reserves this turn, are they locked there until next turn? Is this WAD due to reorganizing? How can I see when they are available? Thanks!
you can't redeploy anything the turn it arrives - either in a Theatre or on the map
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Mon May 31, 2021 6:43 pm
by juv95hrn
If I assign an AOG to Ground Support a Front HQ, will the air units support divisions in Armies attached to this Front HQ? Or only divisions attached directly to the Front HQ itself? Thanks!
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Mon May 31, 2021 6:51 pm
by loki100
ORIGINAL: juv95hrn
If I assign an AOG to Ground Support a Front HQ, will the air units support divisions in Armies attached to this Front HQ? Or only divisions attached directly to the Front HQ itself? Thanks!
anything in the chain of command below the allocation level, so yes all armies reporting to a given front.
the one exception is if an army is the target of its own GS AD then it won't also share in the Front allocation (ie the lower level allocation eliminates any higher level allocation)
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Tue Jun 01, 2021 2:08 am
by Rosencrantus
What exactly would happen if you were playing a PBEM game but the two players have different game versions installed? How bad would the problems be?
RE: Truck Summary in logistics Phase Report is hard to understand:
Posted: Tue Jun 01, 2021 7:06 am
by Stephan61
Reference Production.
Currently playing 1941 Campaign as Axis and noticed on the Logistic Reports that a few elements cannot be built due to lack of Oil.
I have priority repair on all captured Oil Factories.
Question: Is there any other way to influence the Production System (namely OIL production) other than.
1: Priority Repair damaged Oil Factories
2: Add Construction Units.
3: Ensure the Rail Network is connected.
Do I need to add a Depot on the Factory City Hex? for example.