How to share/apply user unit modifications
Posted: Sun Dec 21, 2014 6:04 pm
Be careful with this, may hurt your scenario if something isn't done correctly
How to share and apply unit modifications.
1. After the “creator” has tested his modifications, (made sure all weapons have the correct and working FCR, datalinks, etc). If they are not correct you may "break" somebody's scenario.
2. The “creator” will “Generate Delta Template”, this will make a file that has all the deviations to all the units in their scenario.
3. Open this file with the Notepad and copy
4. Post in thread, noting the DB ID and all the changes, weapons, sensors, datalinks, etc. So others know what they are getting.
Not sure if this has all the correct FCRs, datalinks, etc. but this is orca’s hypothetical SSC based on the Independence LCS[2595]:
Weapons/Mounts:
• 4x 12.7mm MG
• 1x 57mm
• 2x LaWS Laser
• 8x JSM
• 1x Mk15 SEARAM
• 2x Mk36 SRBOC
• 1x Mk41(8cells)
• 2x M53 Nulka
Sensors:
• 4x CEA-MOUNT
• 6x CEA-FAR
• Etc., etc
The “user” will have to have a unit of the same DB ID, in this case [2595], in their scenario.
MAKE SURE TO SAVE A LOT, THIS PROCESS WILL DESTROY YOUR SCENARIO IF DONE WRONG!
1. The “user” will “Generate Template” from the “SBR”.
2. Open that file with the Notepad.
It will look something like this:
3. Copy the text in black from the “creator’s” post and paste in between, in this case lines 4 and 5.
<!--LCS 2 Independence (LCS 2 Independence [2595])-->
</Unit_b7f67e4c-ae10-4c43-bafb-9957b6243f31>
4. Save, Then “Apply SBR script” from the SBR to your scenario.
5. Be sure to keep your scenario’s units unique ID numbers
Your stock Independence class should now be orca’s hypothetical SSC!
Hope this is useful.
How to share and apply unit modifications.
1. After the “creator” has tested his modifications, (made sure all weapons have the correct and working FCR, datalinks, etc). If they are not correct you may "break" somebody's scenario.
2. The “creator” will “Generate Delta Template”, this will make a file that has all the deviations to all the units in their scenario.
3. Open this file with the Notepad and copy
4. Post in thread, noting the DB ID and all the changes, weapons, sensors, datalinks, etc. So others know what they are getting.
Not sure if this has all the correct FCRs, datalinks, etc. but this is orca’s hypothetical SSC based on the Independence LCS[2595]:
Weapons/Mounts:
• 4x 12.7mm MG
• 1x 57mm
• 2x LaWS Laser
• 8x JSM
• 1x Mk15 SEARAM
• 2x Mk36 SRBOC
• 1x Mk41(8cells)
• 2x M53 Nulka
Sensors:
• 4x CEA-MOUNT
• 6x CEA-FAR
• Etc., etc
<?xml version="1.0" encoding="utf-8"?>
<ScenarioUnits>
<Unit_91902350-5e15-4399-bfee-3d6877657fa9>
<!--LCS 2 Independence (LCS 2 Independence [2595])-->
<MountAdd_1196>
<!--Mk41 VLS [8 Cells]-->
<Cov>
<Seg>360</Seg>
</Cov>
</MountAdd_1196>
<MountAdd_2286>
<!--LaWS Laser Gun Prototype-->
<Cov>
<Seg>PB2,SB1,SB2,SMA1,SMA2,SMF1,SMF2,SS1,SS2,</Seg>
</Cov>
</MountAdd_2286>
<MountAdd_2286>
<!--LaWS Laser Gun Prototype-->
<Cov>
<Seg>PB1,PB2,PMA1,PMA2,PMF1,PMF2,PS1,PS2,SB1,</Seg>
</Cov>
</MountAdd_2286>
<Mount_6_2279>
<!--LCS Mission Module-->
<WeaponRecAdd_7100 />
<!--Joint Strike Missile (JSM)-->
</Mount_6_2279>
<Mount_7_2279>
<!--LCS Mission Module-->
<WeaponRecAdd_7100 />
<!--Joint Strike Missile (JSM)-->
</Mount_7_2279>
<Mount_13_1196>
<!--Mk41 VLS [8 Cells]-->
<WeaponRemove_15 />
<!--RIM-162A ESSM-->
<WeaponRecAdd_143 />
<!--RUM-139C VLA [Mk54]-->
<WeaponRecAdd_713 />
<!--RIM-162B ESSM-->
<WeaponEdit_927_16 />
<!--RIM-162B ESSM-->
</Mount_13_1196>
<SensorAdd_4491>
<!--Generic Gun Director [IR/CCD/Laser Rangefinder]-->
<Cov>
<Seg>360</Seg>
</Cov>
<Cov_Ill>
<Seg>360</Seg>
</Cov_Ill>
</SensorAdd_4491>
<SensorAdd_4019>
<!--UMS 4249 CAPTAS Mk2(V)2-->
<Cov>
<Seg>360</Seg>
</Cov>
<Cov_Ill>
<Seg>360</Seg>
</Cov_Ill>
</SensorAdd_4019>
<SensorAdd_3796>
<!--Bridgemaster E ATA-->
<Cov>
<Seg>360</Seg>
</Cov>
<Cov_Ill>
<Seg>360</Seg>
</Cov_Ill>
</SensorAdd_3796>
<SensorAdd_223>
<!--AN/SLQ-32(V)5 Sidekick [ECM]-->
<Cov>
<Seg>PB1,PB2,PMA1,PMA2,PMF1,PMF2,PS1,PS2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PB1,PB2,PMA1,PMA2,PMF1,PMF2,PS1,PS2,</Seg>
</Cov_Ill>
</SensorAdd_223>
<SensorAdd_223>
<!--AN/SLQ-32(V)5 Sidekick [ECM]-->
<Cov>
<Seg>SB1,SB2,SMA1,SMA2,SMF1,SMF2,SS1,SS2,</Seg>
</Cov>
<Cov_Ill>
<Seg>SB1,SB2,SMA1,SMA2,SMF1,SMF2,SS1,SS2,</Seg>
</Cov_Ill>
</SensorAdd_223>
<SensorAdd_3328>
<!--CEA-MOUNT-->
<Cov>
<Seg>PB1,PB2,PMF1,PMF2,SB1,</Seg>
</Cov>
<Cov_Ill>
<Seg>PB1,PB2,PMF1,PMF2,SB1,</Seg>
</Cov_Ill>
</SensorAdd_3328>
<SensorAdd_3328>
<!--CEA-MOUNT-->
<Cov>
<Seg>PMA1,PMA2,PMF1,PS1,PS2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PMA1,PMA2,PMF1,PS1,PS2,</Seg>
</Cov_Ill>
</SensorAdd_3328>
<SensorAdd_3328>
<!--CEA-MOUNT-->
<Cov>
<Seg>PS1,PS2,SMA1,SMA2,SMF2,SS1,SS2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PS1,PS2,SMA1,SMA2,SMF2,SS1,SS2,</Seg>
</Cov_Ill>
</SensorAdd_3328>
<SensorAdd_3328>
<!--CEA-MOUNT-->
<Cov>
<Seg>PB2,SB1,SB2,SMA1,SMA2,SMF1,SMF2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PB2,SB1,SB2,SMA1,SMA2,SMF1,SMF2,</Seg>
</Cov_Ill>
</SensorAdd_3328>
<SensorAdd_3327>
<!--CEA-FAR-->
<Cov>
<Seg>PB1,PB2,PMF2,SB1,SB2,SMF1,</Seg>
</Cov>
<Cov_Ill>
<Seg>PB1,PB2,PMF2,SB1,SB2,SMF1,</Seg>
</Cov_Ill>
</SensorAdd_3327>
<SensorAdd_3327>
<!--CEA-FAR-->
<Cov>
<Seg>PMA1,PMA2,PS1,PS2,SS1,SS2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PMA1,PMA2,PS1,PS2,SS1,SS2,</Seg>
</Cov_Ill>
</SensorAdd_3327>
<SensorAdd_3327>
<!--CEA-FAR-->
<Cov>
<Seg>PB1,PB2,PMF1,PMF2,SB1,</Seg>
</Cov>
<Cov_Ill>
<Seg>PB1,PB2,PMF1,PMF2,SB1,</Seg>
</Cov_Ill>
</SensorAdd_3327>
<SensorAdd_3327>
<!--CEA-FAR-->
<Cov>
<Seg>PB2,SB1,SB2,SMA1,SMA2,SMF1,SMF2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PB2,SB1,SB2,SMA1,SMA2,SMF1,SMF2,</Seg>
</Cov_Ill>
</SensorAdd_3327>
<SensorAdd_3327>
<!--CEA-FAR-->
<Cov>
<Seg>PMA1,PMA2,PMF1,PS1,PS2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PMA1,PMA2,PMF1,PS1,PS2,</Seg>
</Cov_Ill>
</SensorAdd_3327>
<SensorAdd_3327>
<!--CEA-FAR-->
<Cov>
<Seg>PS1,PS2,SMA1,SMA2,SMF2,SS1,SS2,</Seg>
</Cov>
<Cov_Ill>
<Seg>PS1,PS2,SMA1,SMA2,SMF2,SS1,SS2,</Seg>
</Cov_Ill>
</SensorAdd_3327>
<SensorRemove_3_4490 />
<!--TB-37/U MFTA [AN/SQR-20]-->
<SensorRemove_1_5226 />
<!--AN/SPS-77(V)1 [Sea Giraffe AMB 3D]-->
<CommAdd_174 />
<!--AEGIS Missile Datalink [One-Way]-->
</Unit_91902350-5e15-4399-bfee-3d6877657fa9>
</ScenarioUnits>
The “user” will have to have a unit of the same DB ID, in this case [2595], in their scenario.
MAKE SURE TO SAVE A LOT, THIS PROCESS WILL DESTROY YOUR SCENARIO IF DONE WRONG!
1. The “user” will “Generate Template” from the “SBR”.
2. Open that file with the Notepad.
It will look something like this:
Above scenario example has a stock Independence class[2595] and a stock Freedom class[2594], most scenarios will have many more units, I’m sure.<?xml version="1.0" encoding="utf-8"?>
<ScenarioUnits>
<Unit_b7f67e4c-ae10-4c43-bafb-9957b6243f31>
<!--LCS 2 Independence (LCS 2 Independence [2595])-->
</Unit_b7f67e4c-ae10-4c43-bafb-9957b6243f31>
<Unit_a1132263-5ab6-48db-81d4-6b3700832064>
<!--LCS 1 Freedom (LCS 1 Freedom [2594])-->
</Unit_a1132263-5ab6-48db-81d4-6b3700832064>
</ScenarioUnits>
3. Copy the text in black from the “creator’s” post and paste in between, in this case lines 4 and 5.
<!--LCS 2 Independence (LCS 2 Independence [2595])-->
</Unit_b7f67e4c-ae10-4c43-bafb-9957b6243f31>
4. Save, Then “Apply SBR script” from the SBR to your scenario.
5. Be sure to keep your scenario’s units unique ID numbers
Your stock Independence class should now be orca’s hypothetical SSC!
Hope this is useful.
