Page 1 of 2

AE Max Screen Resolution?

Posted: Tue Nov 12, 2019 8:50 pm
by witpqs
I've searched/looked at the release notes and the forum, but I haven't found where anyone posted the actual maximum resolution for AE. I have a new PC & screen with lots of real estate, and I'm wondering if anyone has already established the maximum resolution AE will support?

RE: AE Max Screen Resolution?

Posted: Tue Nov 12, 2019 9:31 pm
by BillBrown
It is not largest I am sure, but it does run at 2560 x 1600

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 12:37 am
by witpqs
Thanks. The monitor I bought for the new PC is 3840 x 2160. When I get that far into settings things up I'll let you know.

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 1:14 am
by BBfanboy
ORIGINAL: witpqs

Thanks. The monitor I bought for the new PC is 3840 x 2160. When I get that far into settings things up I'll let you know.
Someone else posted that they got a 4K monitor and were able to get the game running at full resolution. I think they had to do a fair bit of tweaking of Windows, the monitor software and game switches.

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 2:26 am
by witpqs
ORIGINAL: BBfanboy

ORIGINAL: witpqs

Thanks. The monitor I bought for the new PC is 3840 x 2160. When I get that far into settings things up I'll let you know.
Someone else posted that they got a 4K monitor and were able to get the game running at full resolution. I think they had to do a fair bit of tweaking of Windows, the monitor software and game switches.
Wow! I'll let you know. Probably a couple or few days before I get to it.

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 3:12 am
by CaptBeefheart
I recently got a 27" 2560x1440 monitor and messed with it a lot trying to get the full resolution. I finally gave up and settled for a windowed 1920x1080, which covered about 80-90% of the screen anyway, and I don't have to squint. So, I guess you could say my point is "settling for less than the maximum resolution may be a perfectly acceptable solution." Another point is Seabee's set-up utility saves a lot of time when you're tweaking the startup switches.

Cheers,
CB

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 3:55 am
by Ian R
ORIGINAL: witpqs

Thanks. The monitor I bought for the new PC is 3840 x 2160. When I get that far into settings things up I'll let you know.
3840 x 2160

3840 divided by 16 = 240

2160 divided by 9 = 240

So as to give yourself a little margin around the window, I would suggest you use a multiplier of 236 and the pxf and pyf switches and play in a big window.

so -pxf3776 -pyf2124

No idea if it will work forced to that size.

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 8:14 am
by Hanzberger
ORIGINAL: CaptBeefheart

I recently got a 27" 2560x1440 monitor and messed with it a lot trying to get the full resolution. I finally gave up and settled for a windowed 1920x1080, which covered about 80-90% of the screen anyway, and I don't have to squint. So, I guess you could say my point is "settling for less than the maximum resolution may be a perfectly acceptable solution." Another point is Seabee's set-up utility saves a lot of time when you're tweaking the startup switches.

Cheers,
CB
2560x1440 works that is what I use. dl winexp.exe adjust settings, I use -10, -32 that gives me full screen view, otherwise the bottom row is cut off. Look in the tech help thread for information.

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 9:16 am
by Trugrit

For me, the higher resolutions are not worth it.
Too small and often you get distortion, oblong range rings which I hate.

I use 1920 x 1080 in full screen. I have a widescreen monitor and I consider this best for me.

It is clear enough and large enough and it centers perfectly for my widescreen.

I like round range rings.


Image

RE: AE Max Screen Resolution?

Posted: Wed Nov 13, 2019 10:26 pm
by CaptBeefheart
Hanzberger: Actually, I'm quite happy with what I have for a 27" monitor and like I said, I don't have to squint. If my monitor were 32" I'd probably try to max it out. Also, being windowed, I avoid the strange effects I used to get from switching between the game and browser too many times.

Cheers,
CB

RE: AE Max Screen Resolution?

Posted: Thu Nov 14, 2019 8:58 am
by HansBolter
I have a standard 2k 1980 x 1020 monitor and am forced to run the game at 1280 x 720 to even have a hope of being able to read the text and discern the shape of the icons on the map.

Exactly how microscopic do thing become on the screen if run at full 4k resolution?

RE: AE Max Screen Resolution?

Posted: Thu Nov 14, 2019 9:37 am
by witpqs
ORIGINAL: HansBolter

I have a standard 2k 1980 x 1020 monitor and am forced to run the game at 1280 x 720 to even have a hope of being able to read the text and discern the shape of the icons on the map.

Exactly how microscopic do thing become on the screen if run at full 4k resolution?
The monitor is 32" (32" class they say, actually noting it's 31.5"), so I am hoping it will be big enough.

RE: AE Max Screen Resolution?

Posted: Thu Nov 14, 2019 10:52 am
by Ian R
ORIGINAL: Trugrit


For me, the higher resolutions are not worth it.
Too small and often you get distortion, oblong range rings which I hate.

I


If you set your pxf/pyf switched to a consistent multiplicand of 16/9, that should not happen.

RE: AE Max Screen Resolution?

Posted: Thu Nov 14, 2019 11:31 am
by HansBolter
ORIGINAL: witpqs

ORIGINAL: HansBolter

I have a standard 2k 1980 x 1020 monitor and am forced to run the game at 1280 x 720 to even have a hope of being able to read the text and discern the shape of the icons on the map.

Exactly how microscopic do thing become on the screen if run at full 4k resolution?
The monitor is 32" (32" class they say, actually noting it's 31.5"), so I am hoping it will be big enough.

I'm running on 27" 2k monitor now and will likely acquire a 32" 4k by Christmas, but still have every expectation of having to reduce resolution to be able to make anything legible.

I realize I am likely a special case with my Coke bottle bottom spectacles.

Without corrective lenses I have 20/180 vision in my left eye with 7.5 diopters of astigmatism and 20/240 vision in my right eye with 8.5 diopters of astigmatism.

20/200 vision WITH corrective lenses is legally blind in the US.

RE: AE Max Screen Resolution?

Posted: Fri Nov 15, 2019 8:02 am
by Hanzberger
For me 1980 x 1020 was distorted looking on this monitor. I do wear glasses also. I have a second monitor that I run other programs with so I do not need to close out the game, other wise it would act funny opening and closing. The second monitor is 1980x1020. I specifically went out and bought one since returning to the game. I think it was 200.00. ASUS.
You should always try running programs in the native resolution.

RE: AE Max Screen Resolution?

Posted: Fri Nov 15, 2019 7:20 pm
by Moltrey
Yeah, I have done the resolution shuffle for WITP:AE a LOT lately (borderless window thread if interested).

I also picked up a LG 32UK50T monitor this summer with 3840x2160 native resolution.


There are two problems.
1. The game doesn't want to display correctly if I put -pxf3840 -pyf2160 under the launch parameters in the AE icon.
2. When I could see the game the graphics were so small it is all but impossible to play.


I have resorted to and use permanently now a 2560x1440 setting with the LG. My older NEC 16-10 PA302W monitor will work at 2560x1600 with AE and all is fine.

RE: AE Max Screen Resolution?

Posted: Sat Nov 16, 2019 3:05 pm
by witpqs
ORIGINAL: Moltrey

Yeah, I have done the resolution shuffle for WITP:AE a LOT lately (borderless window thread if interested).

I also picked up a LG 32UK50T monitor this summer with 3840x2160 native resolution.


There are two problems.
1. The game doesn't want to display correctly if I put -pxf3840 -pyf2160 under the launch parameters in the AE icon.
2. When I could see the game the graphics were so small it is all but impossible to play.


I have resorted to and use permanently now a 2560x1440 setting with the LG. My older NEC 16-10 PA302W monitor will work at 2560x1600 with AE and all is fine.
The exact same model!

Are you doing that full screen mode or windowed mode?

RE: AE Max Screen Resolution?

Posted: Sat Nov 16, 2019 5:35 pm
by BillBrown
I have been looking at a LG 32UD59-B from Newegg. They are selling them at $346.99USD.

RE: AE Max Screen Resolution?

Posted: Sun Nov 17, 2019 7:12 pm
by Moltrey
ORIGINAL: witpqs

The exact same model!

Are you doing that full screen mode or windowed mode?

Windowed mode.

If I try to use fullscreen now, I start getting the desktop graphics "peeking" through (in squares) when I move the mouse over locations and units on the pacific map. Frustrating. That and it doesn't allow for fluid task-switching to Kull's spreadsheet and all the game aids I have on hand.

Also, YMMV, but I ended up uninstalling the LG settings program that gets installed. It was causing some issues with DisplayFusion Pro. It may have contributed to other wonkiness on my PC too.

RE: AE Max Screen Resolution?

Posted: Sun Nov 17, 2019 7:39 pm
by witpqs
ORIGINAL: Moltrey
ORIGINAL: witpqs

The exact same model!

Are you doing that full screen mode or windowed mode?

Windowed mode.

If I try to use fullscreen now, I start getting the desktop graphics "peeking" through (in squares) when I move the mouse over locations and units on the pacific map. Frustrating. That and it doesn't allow for fluid task-switching to Kull's spreadsheet and all the game aids I have on hand.

Also, YMMV, but I ended up uninstalling the LG settings program that gets installed. It was causing some issues with DisplayFusion Pro. It may have contributed to other wonkiness on my PC too.
My default method of starting is never pop in the disc which comes with printers, displays, etc. I only resort to them if needed because things aren't working right. I purchased the PC and the screen ala cart, so I'm pretty sure there is no LG settings program in there so far.

DisplayFusion Pro - what is that?

BTW, the only reason I went with full screen at all on the current (old) PC was the jumping during turn resolution. I'm hoping it will work in widowed mode on the new PC, but not up to the point of testing it yet.