Page 1 of 1
CHS v1.04 posted at Spooky's and Rogues
Posted: Sun Sep 04, 2005 11:28 am
by treespider
Herrbear pointed out a problem...
The G4M2 Betty and F2A2 Buffalo were pointing to the same bmp. Evidently slots 77-80 are not available to the Japanese.
So I used MS-paint to cut and paste the G4M2 into slot 76 and edited the wpa154.dat and wpa155.dat files to point the G4M2 to BMP 76. I forwarded these corrections to AB for installation and I have them available zipped if you e-mail me at cwebb1 (at) chartertn (dot) net
RE: Guess what's at Spooky's!
Posted: Sun Sep 04, 2005 2:36 pm
by Herrbear
All right. Thanks
RE: Guess what's at Spooky's!
Posted: Sun Sep 04, 2005 3:29 pm
by Herrbear
By moving the G4M2 to slot 80, isn't that interfering with the Buffalo in slot 80 for the Americans?
RE: Guess what's Mising from CHS 1.03!
Posted: Sun Sep 04, 2005 4:11 pm
by joliverlay
Ichang is not showing up on my map in china. The ares is named and has forces but no citiy, industry, icon, etc.
RE: Guess what's Mising from CHS 1.03!
Posted: Sun Sep 04, 2005 4:14 pm
by joliverlay
Look at this!
RE: Guess what's Mising from CHS 1.03!
Posted: Sun Sep 04, 2005 4:18 pm
by joliverlay
sorry forgot picture
RE: My mistake.
Posted: Sun Sep 04, 2005 4:47 pm
by joliverlay
OOOOOPPPPPPPPPPSSSSSS......
Ichang is on map, it is Jap occupied and I though it was Hankow.....my bobo.
RE: Guess what's Mising from CHS 1.03!
Posted: Sun Sep 04, 2005 4:48 pm
by joliverlay
my mistake, there but Japanese occupied at start.
CHS v1.03 Planeside problem...
Posted: Sun Sep 04, 2005 6:39 pm
by treespider
ORIGINAL: Herrbear
By moving the G4M2 to slot 80, isn't that interfering with the Buffalo in slot 80 for the Americans?
This is probably an error and I've notified the proper authorities!
RE: CHS v1.03 Planeside problem...
Posted: Sun Sep 04, 2005 7:12 pm
by treespider
Herrbear pointed out a problem...
The G4M2 Betty and F2A2 Buffalo were pointing to the same bmp. Evidently slots 77-80 are not available to the Japanese.
So I used MS-paint to cut and paste the G4M2 into slot 76 and edited the wpa154.dat and wpa155.dat files to point the G4M2 to BMP 76. I forwarded these corrections to AB for installation and I have them available zipped if you e-mail me at cwebb1 (at) chartertn (dot) net
RE: CHS v1.03 Planeside problem...
Posted: Mon Sep 05, 2005 6:06 am
by rockmedic109
17th Chinese Air Base Force at Tsuyung is prepped for Petropavlosk.
RE: CHS v1.03 Planeside problem...
Posted: Mon Sep 05, 2005 11:23 am
by treespider
ORIGINAL: rockmedic109
17th Chinese Air Base Force at Tsuyung is prepped for Petropavlosk.
Not quite sure how that happened, but you are correct. (Maybe some Soviet advisors are present.) Error noted.
RE: CHS v1.03 Planeside problem...
Posted: Mon Sep 05, 2005 4:36 pm
by witpqs
Treespider,
Thanks much for the temporary fix you emailed out. Quite a high service level! [:)]
RE: CHS v1.03 Planeside problem...
Posted: Mon Sep 05, 2005 7:08 pm
by Tanaka
ORIGINAL: treespider
Herrbear pointed out a problem...
The G4M2 Betty and F2A2 Buffalo were pointing to the same bmp. Evidently slots 77-80 are not available to the Japanese.
So I used MS-paint to cut and paste the G4M2 into slot 76 and edited the wpa154.dat and wpa155.dat files to point the G4M2 to BMP 76. I forwarded these corrections to AB for installation and I have them available zipped if you e-mail me at cwebb1 (at) chartertn (dot) net
Thats odd... my G4M2 is pointing to the Japanese Claude...
RE: CHS v1.03 Planeside problem...
Posted: Mon Sep 05, 2005 8:02 pm
by Tanaka
ORIGINAL: treespider
Herrbear pointed out a problem...
The G4M2 Betty and F2A2 Buffalo were pointing to the same bmp. Evidently slots 77-80 are not available to the Japanese.
So I used MS-paint to cut and paste the G4M2 into slot 76 and edited the wpa154.dat and wpa155.dat files to point the G4M2 to BMP 76. I forwarded these corrections to AB for installation and I have them available zipped if you e-mail me at cwebb1 (at) chartertn (dot) net
Why not just move it back to where it was? Slot 27...
er why was it moved in the first place??? [&:]
RE: CHS v1.03 Planeside problem...
Posted: Mon Sep 05, 2005 11:54 pm
by treespider
ORIGINAL: Tanaka
ORIGINAL: treespider
Herrbear pointed out a problem...
The G4M2 Betty and F2A2 Buffalo were pointing to the same bmp. Evidently slots 77-80 are not available to the Japanese.
So I used MS-paint to cut and paste the G4M2 into slot 76 and edited the wpa154.dat and wpa155.dat files to point the G4M2 to BMP 76. I forwarded these corrections to AB for installation and I have them available zipped if you e-mail me at cwebb1 (at) chartertn (dot) net
Why not just move it back to where it was? Slot 27...
er why was it moved in the first place??? [&:]
TheElf wanted it moved to Slot 80. Not sure why we moved it from 27. Possibly new tops?
RE: CHS v1.03 Planeside problem...
Posted: Tue Sep 06, 2005 5:10 am
by Tanaka
ORIGINAL: treespider
ORIGINAL: rockmedic109
17th Chinese Air Base Force at Tsuyung is prepped for Petropavlosk.
Not quite sure how that happened, but you are correct. (Maybe some Soviet advisors are present.) Error noted.
i tried to correct this in the editor and could not figure out where to do it...
any hints??? [&:]
edit: nevermind found it!
RE: CHS v1.03 Planeside problem...
Posted: Tue Sep 06, 2005 10:31 am
by treespider
Spooky 's and RogueUSMC now have v1.04 posted on there sights. It includes the small number of fixes to v1.03