Updated DB image & description packs are available!

Take command of air and naval assets from post-WW2 to the near future in tactical and operational scale, complete with historical and hypothetical scenarios and an integrated scenario editor.

Moderator: MOD_Command

User avatar
BeirutDude
Posts: 2799
Joined: Sat Apr 27, 2013 9:44 am
Location: Jacksonville, FL, USA

RE: Updated DB image packs are available!

Post by BeirutDude »

Is the game still churning after 30 min or so?

Yes, I just started it and went out to get lunch for the family.

Now I deleted all of the Images and Descriptions and reran the patch and it started fine.

At this point I'm reloading the DB3000 and CWDB Images and Descriptions. Then i'm going to rerun the patch an see what happens. It ran fine last night when I did just that, it's when I tried to add the Secondary Images this morning that it happened again. If there is an issue I'm 99 and 44/100s sure that is where it is.
"Some people spend an entire lifetime wondering if they made a difference. The Marines don't have that problem."
PRESIDENT RONALD REAGAN, 1985

I was Navy, but Assigned TAD to the 24th MAU Hq in Beirut. By far the finest period of my service!
User avatar
BeirutDude
Posts: 2799
Joined: Sat Apr 27, 2013 9:44 am
Location: Jacksonville, FL, USA

RE: Updated DB image packs are available!

Post by BeirutDude »

That's the ticket, Loading the straight databases without secondary images and running the last patch. Starts right up with no problems

So starts fine with no images/descriptions and starts fine with the base CWDB/DB3000 images after running the patch, but locks up with the Secondary Images added to the Image folders.

Thanks for all the hard work updating the images and descriptions.
"Some people spend an entire lifetime wondering if they made a difference. The Marines don't have that problem."
PRESIDENT RONALD REAGAN, 1985

I was Navy, but Assigned TAD to the 24th MAU Hq in Beirut. By far the finest period of my service!
rmwilsonjr
Posts: 181
Joined: Sat Jan 08, 2011 1:17 am

RE: Updated DB image packs are available!

Post by rmwilsonjr »

Awesome job as always, team! After download, my CWDB is build 466 and my DB3000 is build 483. Is that correct?
Richard
User avatar
Sardaukar
Posts: 12326
Joined: Wed Nov 28, 2001 10:00 am
Location: Finland/Israel

RE: Updated DB image packs are available!

Post by Sardaukar »

Only patches affect DB, these are just pics.
"To meaningless French Idealism, Liberty, Fraternity and Equality...we answer with German Realism, Infantry, Cavalry and Artillery" -Prince von Bülov, 1870-

Image
User avatar
mikkey
Posts: 3173
Joined: Sun Feb 10, 2008 1:04 pm
Location: Slovakia

RE: Updated DB image packs are available!

Post by mikkey »

Thanks for update!
User avatar
BeirutDude
Posts: 2799
Joined: Sat Apr 27, 2013 9:44 am
Location: Jacksonville, FL, USA

RE: Updated DB image & description packs are available!

Post by BeirutDude »

CV60, Hey I wonder if my issue is some kind of registration of the images to unit numbers? reason I say that was I was placing a Patriot battery in a scenario I'm designing and this is what came up for the image/description...

Image
Attachments
Capture.jpg
Capture.jpg (157.88 KiB) Viewed 339 times
"Some people spend an entire lifetime wondering if they made a difference. The Marines don't have that problem."
PRESIDENT RONALD REAGAN, 1985

I was Navy, but Assigned TAD to the 24th MAU Hq in Beirut. By far the finest period of my service!
User avatar
CV60
Posts: 1036
Joined: Sun Sep 30, 2012 11:40 pm

RE: Updated DB image & description packs are available!

Post by CV60 »

Thanks. I'll take a look at it. I may have simply typed the wrong facility number.

Edit: Yep, that is it. If you go into the DB3000 images, go ahead and delete Facility_3223, and do the same for the description file. I'll fix the issue in the next (30 June or so) image update
“Do I not destroy my enemies when I make them my friends?” -Abraham Lincoln
pclaurent
Posts: 53
Joined: Fri May 17, 2019 5:29 pm

RE: Updated DB image & description packs are available!

Post by pclaurent »

where do we post new images suggestions?
User avatar
CV60
Posts: 1036
Joined: Sun Sep 30, 2012 11:40 pm

RE: Updated DB image & description packs are available!

Post by CV60 »

where do we post new images suggestions?
Thanks for offering to help. PM me and kgambit. Include a copy of the picture and the link to it. If we use it, we will put it in the next update (updates are generally released every 3 months, around 1 Jan, 30 April, 30 June, 30 Sept).
“Do I not destroy my enemies when I make them my friends?” -Abraham Lincoln
Orffen
Posts: 19
Joined: Wed May 27, 2020 5:01 am

RE: Updated DB image & description packs are available!

Post by Orffen »

Thanks for these!

There's an issue with the description for #718 - AIM-120C-7 AMRAAM P3I.3 - it comes up as a MIM-23 HAWK description. Image looks OK.

Can workaround by deleting Weapon_718.txt
User avatar
CV60
Posts: 1036
Joined: Sun Sep 30, 2012 11:40 pm

RE: Updated DB image & description packs are available!

Post by CV60 »

Thanks for these!

There's an issue with the description for #718 - AIM-120C-7 AMRAAM P3I.3 - it comes up as a MIM-23 HAWK description. Image looks OK.

Can workaround by deleting Weapon_718.txt

You are welcome. Thanks for your note about the MIM-23 file. FYI, We corrected the Weapon_718 issue the last update, but have not yet replaced it with a AIM-120C description. Because of that, if you simply did an overwrite of the description files, that change would not have been made in your installation, as the erroneous MIM-23 file would not have been overwritten, and would remain in your installation. Kgambit and I recommend that players do a complete deletion of all images and description files before applying the latest image and description packages. This is because we occasionally correct obvious errors such as the MIM-23 error that you note by simply eliminating the erroneous file, but do not replace the erroneous file with a corrected file (although we eventually will do so)
“Do I not destroy my enemies when I make them my friends?” -Abraham Lincoln
Orffen
Posts: 19
Joined: Wed May 27, 2020 5:01 am

RE: Updated DB image & description packs are available!

Post by Orffen »

Thanks, that must have been it!
Parel803
Posts: 932
Joined: Thu Oct 10, 2019 3:39 pm
Location: Netherlands

RE: Updated DB image packs are available!

Post by Parel803 »

My apologize if I add in nthe wrong post. Aircraft image drawing in DB of the NH90 "Aircraft_656_t5"looks incorrect. I do hope I have the right DB intalled, if not sorry for the inconvenience.
with regards

Image

Image
Attachments
656zelf.jpg
656zelf.jpg (47.21 KiB) Viewed 332 times
aircraft_656_t5.jpg
aircraft_656_t5.jpg (86.53 KiB) Viewed 332 times
kgambit
Posts: 92
Joined: Fri Jan 09, 2015 1:34 pm

RE: Updated DB image packs are available!

Post by kgambit »

Parel,

Looks like you installed the CWDB line drawings in the DB3K image folder.
Parel803
Posts: 932
Joined: Thu Oct 10, 2019 3:39 pm
Location: Netherlands

RE: Updated DB image packs are available!

Post by Parel803 »

thank you. sorry for my mistake
with regards
Battelman2
Posts: 94
Joined: Sat Dec 01, 2018 6:13 pm

RE: Updated DB image packs are available!

Post by Battelman2 »

As of DB v480 (possibly fixed in later version) weapon #668 has the wrong description. 20mm GAM-BO1 Oerlikon Burst [20 rnds] has description for MIM-23 Hawk. This was the description that the game (v1.01 - Build 1147.4) downloaded automatically- I did not manually install any descriptions/images.
User avatar
KLAB
Posts: 480
Joined: Tue Feb 27, 2007 5:24 pm

RE: Updated DB image packs are available!

Post by KLAB »

Descriptions are a separate download and forum.
Try the following link https://www.matrixgames.com/forums/tm.asp?m=3441939
and check you've downloaded the latest DB Image and description packs.
Cheers
K
ORIGINAL: Battelman2

As of DB v480 (possibly fixed in later version) weapon #668 has the wrong description. 20mm GAM-BO1 Oerlikon Burst [20 rnds] has description for MIM-23 Hawk. This was the description that the game (v1.01 - Build 1147.4) downloaded automatically- I did not manually install any descriptions/images.
ParachuteProne
Posts: 227
Joined: Mon Aug 02, 2004 1:35 pm

RE: Updated DB image packs are available!

Post by ParachuteProne »

Is there any chance the database and subscriptions files could be added to the steam workshop, so they would be installed automatically when posted. Once subscribed to ?
Battelman2
Posts: 94
Joined: Sat Dec 01, 2018 6:13 pm

RE: Updated DB image packs are available!

Post by Battelman2 »

ORIGINAL: KLAB

Descriptions are a separate download and forum.
Try the following link
and check you've downloaded the latest DB Image and description packs.
Cheers
K
ORIGINAL: Battelman2

As of DB v480 (possibly fixed in later version) weapon #668 has the wrong description. 20mm GAM-BO1 Oerlikon Burst [20 rnds] has description for MIM-23 Hawk. This was the description that the game (v1.01 - Build 1147.4) downloaded automatically- I did not manually install any descriptions/images.

As I said in my post, I did not download any image or description packs manually. I simply installed CMO, launched it, and that was the description that was auto-downloaded.
alphali
Posts: 94
Joined: Fri Feb 12, 2016 8:56 am

RE: Updated DB image packs are available!

Post by alphali »

In CMO images and descriptions are downloaded as needed if you didn't download the full package
Post Reply

Return to “Command: Modern Operations series”