[RELEASED] Speech and Ambient Sound Module - Updated CMANO 1.12 936.11

[Rangoon]

ORIGINAL: jptheronmd

Hi everyone, I am new to the forums and need some help with Seahag. I am running version 1.0g together with CMANO v1.07 B678. I ran Seahag as the instructions explained and used the Default Speech Grid and Sound Grid buttons first. I also manually entered the Steam version of CMANOs dir D:\Steam Games\steamapps\common\Command Modern Air Naval Operations\Logs. AutoDetect Player side is on. I then exit and restart Seahag. Start it and can hear the initialization and start up speech. I then load CMANO and start a scenario. Seahag detects a new log file and I can hear the speech confirming this. From then on all I hear is the ambient sound and no speech.

I have also tried disabling side detection and manually entering the side. Any ideas?

Regards
JP

PS I am using Windows 8.1 64 bit.

So just to clarify, you are using all of the default entries from 1.0g? I mean did you change anything? Can you upload a log file which you feel should have triggered TTS but didn't? Or paste in the entries which should have triggered TTS?

[jptheronmd]

Thanks for the reply Rangoon. Here is a log file attached. Yes - everything on default.

[Rangoon]

ORIGINAL: jptheronmd

Thanks for the reply Rangoon. Here is a log file attached. Yes - everything on default.

Sorry, I actually meant a CMANO log file. Although I did notice in the SeaHag log in kept mentioning "skipping until player side found".

After you set the default sound grid etc., and your other options like auto detect player side, did you save the SeaHag settings?

Here are my program settings for SeaHag, everything above the Log Window:
Allow auto selector, checked
Start at end of file, checked
More Diagnostics, unchecked
Use Microsoft Speech API
Voice On, checked
Sound On, checked
CMANO log files location (set location) - D:\Program Files\Matrix Games\Command Modern Air Naval Operations\Logs
Speech Level: 1
AutoDetect Playerside, checked
Savegame Force Wait for PlayerSide, checked
Reset PlayerSide on New File, checked

Save Settings
Start SeaHag

You should at least be getting things like contact reports and weapon engagement announcements once you get into that phase of the mission. That should be pretty standard for whatever mission you're playing.

Did you let the mission advance that far?

Also, you could copy/paste the following line below the SeaHag log window, turn AutoDetect Playerside off and manually input CVW-15 as playerside, then hit Parse Line. Do you get a TTS event?

2/21/1983 5:03:46 PM - CVW-15: New contact! Designated BOGEY #58 - Detected by VF-51 Screaming Eagles, NE-100 [Sensors: AN/AWG-9] at 118deg - 104.8nm

[sluggy2010]

Hi JP,

To confirm -

1/ You have clicked Default speech grid then Default Sound grid.
2/ You entered into Hag your CMANO logfile directory
2/ You clicked save settings and then clicked start SeaHag and Hag Spoke.
4/ Hag found your new logfile and spoke, but then said nothing more?

Can you post a screenshot of your hag window please, if you heard hag speak when you clicked start SeaHag then it would be down to the speech grid processing which works for pretty much all situations.

The only other thing I can think of is that you have not got the log settings turned on in CMANO, which activated in the menu Game->Game Options->Message Log tab.

Mine are as per the attached picture.


Regards

Sluggy

[jptheronmd]

Hi sluggy, thanks for the reply. I have done exactly as you said. Does SeaHag only read pop up messaged? I do not have popup messages enabled as I don't like how they pause the sim. I will test and reply with screen shot as soon as possible.

[jptheronmd]

Here is my message log settings.

[jptheronmd]

My Seahag window.

[sluggy2010]

Nope the opposite - it only can receive the entries tagged for the logs - popups does not affect it.

Can you post the actual CMANO log file from the game session ( rather than the debug output above) and I'll try this end.

Cheers

Sluggy

[jptheronmd]

Here it is

[Rangoon]

ORIGINAL: jptheronmd

Here it is

I see that the player side is not being recognized when I try an entry from this log file. It appears to be the date format in the time stamp that it's getting confused by. From the debugger:

RAW Line:1983-02-21 5:04:36 PM - CVW-15: New contact! Designated BOGEY #58 - Detected by VAW-114 Hormel Hogs, NE-600 [Sensors: AN/ALR-59 PDS] at 117deg - Estimated 169nm
Processing Line <Timestamp Removed>2-21 5:04:36 PM - CVW-15: New contact! Designated BOGEY #58 - Detected by VAW-114 Hormel Hogs, NE-600 [Sensors: AN/ALR-59 PDS] at 117deg - Estimated 169nm
Checking Player Side is 2-21 5 Filtering for CVW-15
Failed Side Check - Skipping Line


the side in ths log file is CVW-15, but Sea Hag is recognizing as "2-21 5" which is the date and first digit of time from the time stamp. In my logs, the format of the time stamp is different: "2/21/1983 5:03:46 PM"

Does it work if you change the date format in CMANO?

EDIT: In fact, I don't see a way to change the format in CMANO. Is this just being pulled from Windows? I'm sure Sluggy will know what to do.

[sluggy2010]

Is that the original text file? - it looks wrong - why is HTML embedded in there?

Is all that in your original file JP? Or something that the upload process has added?

If that is in the original file then that is why its not working.


Sluggy



1983-02-21 5:00:01 PM - CVW-15: <BODY scroll=auto><DIV id=yui_3_7_2_1_1377346728025_12158><B><SPAN lang=EN-GB>Phase I: Ready aircraft</SPAN></B></DIV>
<DIV><B><SPAN lang=EN-GB></SPAN></B><SPAN lang=EN-GB></SPAN> </DIV>
<DIV></DIV>
<DIV id=yui_3_7_2_1_1377346728025_12160><SPAN lang=EN-GB id=yui_3_7_2_1_1377346728025_12159>Select NAS Fallon air base on the map. In the <EM>Unit Status </EM>pane press the <EM>Aircraft: 40/72 </EM>button to bring up the Air Ops (Air Operations) window. Press the + (plus) to the left of the aircraft types to list each individual aircraft on the base. Review the list of aircraft and their loadouts. The aircraft that will participate in the strike have been readied with combat or support loadouts, the rest are set to unavailable.</SPAN></DIV>
<DIV><SPAN lang=EN-GB></SPAN> </DIV>
<DIV></DIV>
<DIV><SPAN lang=EN-GB>There are F-14A Tomcat fighters armed with long-range air-to-air missiles (AAMs), A-6E Intruder bomb trucks in the strike role armed with various types of bombs, A-7E Corsairs in the suppression of enemy air defenses (SEAD) role armed with anti-radiation (anti-radar) missiles (ARMs), and more A-7E Corsairs in the stand-off role and ground attack role armed with TV-guided glide bombs and iron bombs.</SPAN></DIV>

[jptheronmd]

Hi Sluggy,

That is the correct log file. It is for a tutorial mission. I notice the 'normal' missions do not have all the HTML stuff. Let me try with a normal mission like Frisian Flag and re-post a log file.

JP

[jptheronmd]

Tested with Frisian flag. Same thing. Uploaded log file and it looks 'normal'. Still not sure why this is happening. Got Steam to check install integrity too. Files all OK.

[sluggy2010]

OK - I can see the problem now - will fix it up tonight / tomorrow.

For the intro mission with the tags in it - they will definitely not work.

The "normal" missions will after I've made the change - it is the date format causing the problem.

Which country / language combination are you using out of interest?



Regards

Sluggy

[sluggy2010]

OK, for those users with different date formats like JP above then version 1.0i should fix the date recognition issues.

Please find attached version 1.0i if Rangoon and JP could confirm it works for both of you then I'll update the front page version.


Cheers

Sluggy

[jptheronmd]

Hi Scully thanks so much. I realize now what you mean about the dates. I am using a date format as yyyy/mm/dd.

Sorry to be a bother.

Thank you!

[Rangoon]

ORIGINAL: sluggy


OK, for those users with different date formats like JP above then version 1.0i should fix the date recognition issues.

Please find attached version 1.0i if Rangoon and JP could confirm it works for both of you then I'll update the front page version.


Cheers

Sluggy

I pasted another contact event from JP's log into 1.0i and it worked fine.

[jptheronmd]

Hi Rangoon and Sluggy,

Just tested last night works perfectly (if I can remember to turn off and on when I play the next scenario)

[sluggy2010]

Thanks chaps - credited and front page version updated.


Regards

Sluggy

[sluggy2010]

As Saturday was ANZAC day here in Australia - I cannot let that go past without a note of remembrance and thanks.

http://www.smh.com.au/national/ww1/anza ... msq79.html

We Will Remember Them.