This is How I install WITP-AE
Moderators: wdolson, MOD_War-in-the-Pacific-Admirals-Edition
RE: This is How I install WITP-AE
I think one very important thing to keep in mind is the speed of modern CPUs, not to mention Video Cards.
The minimum specs for WitP:AE are for a 500 MHz processor and the recommended is for a 1 GHz processor. Most modern
CPUs are at least 2.8 GHz with many much faster.
Looking at the GPU, the minimum is 8MB video graphics card 16 bit color
and the recommended is the same. Again we are way past that even on integrated graphics that some are still
using.
So I would suggest that people use -cpu2 and that should run the game as fast as you can with good game load times.
I think that not using just 1 core on an Intel Processor runs into some of those delay problems in loading.
I upgraded my computer 2.5 years ago and my old ran the game just fine using a -cpu2 switch.
One thing I have found is that not using the -dd_sw switch causes long delays in night time operations,
coast watchers, bombardments, surface combat, etc. My system is plenty fast enough to do the direct draw in software with no problems.
The minimum specs for WitP:AE are for a 500 MHz processor and the recommended is for a 1 GHz processor. Most modern
CPUs are at least 2.8 GHz with many much faster.
Looking at the GPU, the minimum is 8MB video graphics card 16 bit color
and the recommended is the same. Again we are way past that even on integrated graphics that some are still
using.
So I would suggest that people use -cpu2 and that should run the game as fast as you can with good game load times.
I think that not using just 1 core on an Intel Processor runs into some of those delay problems in loading.
I upgraded my computer 2.5 years ago and my old ran the game just fine using a -cpu2 switch.
One thing I have found is that not using the -dd_sw switch causes long delays in night time operations,
coast watchers, bombardments, surface combat, etc. My system is plenty fast enough to do the direct draw in software with no problems.
RE: This is How I install WITP-AE
I'd agree with that. I ran a few "load game" tests with different switches, and it was maybe a 30 second time difference between none and several. In game, the effect wasn't even noticeable. You'll see far more impact from changing things like message delays or turning search arcs on/off.
So yes, whether the game runs on 6 cores or 1 isn't a big deal - modern systems will max out this old code either way. That said, running the game on something other than CPU1 is beneficial (and thus the player is advised to use the -cpu3 or -cpu4 switches, even -cpu2), but otherwise not worth worrying about. Thanks for digging into this!
So yes, whether the game runs on 6 cores or 1 isn't a big deal - modern systems will max out this old code either way. That said, running the game on something other than CPU1 is beneficial (and thus the player is advised to use the -cpu3 or -cpu4 switches, even -cpu2), but otherwise not worth worrying about. Thanks for digging into this!
RE: This is How I install WITP-AE
Works like a charm. Love the 'manual' option over Seebee 

My Top Matrix Games 1) CMO MP?? 2) WITP/AE 3) SOW 4) Combat Mission 5) Armor Brigade
Twitter
https://twitter.com/TacticWargamer
https://twitter.com/TacticWargamer
Re: This is How I install WITP-AE
If I can "bump" this.... I followed Trugrit's advice and I set my switches same as Trugrit but add the PX and PY resolution for my desktop and it only runs in a window about 2/3rd of my laptop screen. Fooling with the resolutions, it always ends up the same size window. I am stumped. The game DOES run fine, just in a too small window.
Using SeaBee, I enter the same values but it generates a shortcut that send me to a black screen and I have to CTRL ALT DELETE out of it to desktop.
ANy advice?
Using SeaBee, I enter the same values but it generates a shortcut that send me to a black screen and I have to CTRL ALT DELETE out of it to desktop.
ANy advice?
Re: This is How I install WITP-AE
Instead of using -px and -py try using -pxf and -pyf
Re: This is How I install WITP-AE
Thanks so much but it doesn't change anything. Appreciate the suggestion though
Re: This is How I install WITP-AE
Bump....GP
Intel i7 4.3GHz 10th Gen,16GB Ram,Nvidia GeForce MX330
AKA General Patton
DW2-Alpha/Beta Tester
SCW Manual Lead & Beta Support Team
"Do everything you ask of those you command"....Gen. George S. Patton
AKA General Patton
DW2-Alpha/Beta Tester
SCW Manual Lead & Beta Support Team
"Do everything you ask of those you command"....Gen. George S. Patton
Re: This is How I install WITP-AE
Hello! Bought WitpAE on this sale and am very excited to finally play it.
This install tutorial is priceless.
Thank you!
This install tutorial is priceless.
Thank you!
- Taktikfuchs
- Posts: 4
- Joined: Fri May 20, 2022 4:41 am
- Contact:
Re: This is How I install WITP-AE
First of all: Many thanks for this tutorial
But now my question:
You mentioned in part 2 patch 26b...is this meanwhile replaced by 27b?
Thanks in advance.
But now my question:
You mentioned in part 2 patch 26b...is this meanwhile replaced by 27b?
Thanks in advance.
Taktikfuchs - Tactical Gaming auf Youtube: www.youtube.com/@Taktikfuchs
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
Re: This is How I install WITP-AE
Wait for the next patch....GPTaktikfuchs wrote: Tue Sep 24, 2024 7:37 pm First of all: Many thanks for this tutorial
But now my question:
You mentioned in part 2 patch 26b...is this meanwhile replaced by 27b?
Thanks in advance.
Intel i7 4.3GHz 10th Gen,16GB Ram,Nvidia GeForce MX330
AKA General Patton
DW2-Alpha/Beta Tester
SCW Manual Lead & Beta Support Team
"Do everything you ask of those you command"....Gen. George S. Patton
AKA General Patton
DW2-Alpha/Beta Tester
SCW Manual Lead & Beta Support Team
"Do everything you ask of those you command"....Gen. George S. Patton
- Taktikfuchs
- Posts: 4
- Joined: Fri May 20, 2022 4:41 am
- Contact:
Re: This is How I install WITP-AE
There will be a next Patch? When?
Taktikfuchs - Tactical Gaming auf Youtube: www.youtube.com/@Taktikfuchs
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
- Platoonist
- Posts: 3042
- Joined: Sun May 11, 2003 4:53 am
- Location: Yoyodyne Propulsion Systems
Re: This is How I install WITP-AE
A question that gets asked a lot. Soon is the standard answer.
https://www.matrixgames.com/forums/view ... 3&t=389948
- Taktikfuchs
- Posts: 4
- Joined: Fri May 20, 2022 4:41 am
- Contact:
Re: This is How I install WITP-AE
Hahaha....ok.Platoonist wrote: Tue Sep 24, 2024 11:02 pmA question that gets asked a lot. Soon is the standard answer.
https://www.matrixgames.com/forums/view ... 3&t=389948
And if i'm not patient enough to wait for the next patch, i replace the 26b mentioned in this thread with the actuall 27b?
Taktikfuchs - Tactical Gaming auf Youtube: www.youtube.com/@Taktikfuchs
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
- Platoonist
- Posts: 3042
- Joined: Sun May 11, 2003 4:53 am
- Location: Yoyodyne Propulsion Systems
Re: This is How I install WITP-AE
I'd stick with 26b as 27b had a lot of issues that will be addressed or modified in the latest build.Taktikfuchs wrote: Tue Sep 24, 2024 11:25 pm
And if i'm not patient enough to wait for the next patch, i replace the 26b mentioned in this thread with the actuall 27b?
- Taktikfuchs
- Posts: 4
- Joined: Fri May 20, 2022 4:41 am
- Contact:
Re: This is How I install WITP-AE
Thank you...so i will try 26b
Taktikfuchs - Tactical Gaming auf Youtube: www.youtube.com/@Taktikfuchs
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
Taktikfuchs - Tactical Gaming auf TwitchTV: https://www.twitch.tv/TaktikfuchsTV
Unterstütze mich auf Patreon: https://www.patreon.com/TaktikfuchsTV
Re: This is How I install WITP-AE
I just got a new computer first will this work on windows 11?
second if it does do I still have to buy it again ( one purchase per hard drive?) deal.
Thanks,if I do not have to buy it again and it will work in windows 11 where do I put my key in for download?
second if it does do I still have to buy it again ( one purchase per hard drive?) deal.
Thanks,if I do not have to buy it again and it will work in windows 11 where do I put my key in for download?
- Platoonist
- Posts: 3042
- Joined: Sun May 11, 2003 4:53 am
- Location: Yoyodyne Propulsion Systems
Re: This is How I install WITP-AE
The CD-ROM version of this game I purchased back in 2009 installed on Windows 11 just fine. Fortunately, I had still had a portable optical drive to do it with. Whatever way you bought the game originally there should be a downloadable file of it on your My Page account you can install on your new computer. A lot of people here have multiple installs of this game on one computer, so it's not a one purchase per hard drive situation. I don't think Matrix is quite like Adobe yet where it feels like they want you to keep buying what you thought you already owned.789456281 wrote: Mon Sep 30, 2024 3:26 am I just got a new computer first will this work on windows 11?
second if it does do I still have to buy it again ( one purchase per hard drive?) deal.
Thanks,if I do not have to buy it again and it will work in windows 11 where do I put my key in for download?
Re: This is How I install WITP-AE
Thank you.
-
- Posts: 7442
- Joined: Thu Jan 17, 2002 10:00 am
- Location: Cottesmore, Rutland
Re: This is How I install WITP-AE
Note you can only install once. All the others are copies of that install patched which ever way you want.
Re: This is How I install WITP-AE
Thanks again I thought it was just a patch all seemed to go well have not launched the game yet but it looks good.