Bugs

Moderators: Hubert Cater, BillRunacre

User avatar
BillRunacre
Posts: 6615
Joined: Mon Jul 22, 2013 2:57 pm
Contact:

RE: Narvik Bug?

Post by BillRunacre »

ORIGINAL: Schrudcher

I am Playing allies and left Polen, France and the USSR to the AI.
I Did not get a message about the Finnish expedition but it toke place and saidly they where to late.

After that Germany toke Denmark and Norway.
Did get the question to send the rupertForce to Narvik and accepted. After 2 turns they did show up at Narvik but the France did not they still at Dundee.

Hi Schrudcher

The French receive the Decision to send an expedition to Finland, as when designing this I thought that the Allies wouldn't want two Decisions on doing this.

However, when it comes to sending units to Narvik later on, there are separate Decisions for the British and French, as one may not want to commit both units. This works well when you control both the British and French, but when the AI controls one it will act according to the % chance set in the script to send the unit (zero in this instance).

I'm not sure of an easy solution here, though in future it might be best to switch France back to your control just for that turn, as that would enable you to respond to that Decision, and then switch it back to AI control later on.

Alternatively the unit could be loaded into an Amphibious Transport (Long Range) and sent to support Rupertforce, though it won't arrive until a little later. Some Carriers would also be useful in support.
Follow us on Twitter: https://twitter.com/FurySoftware

We're also on Facebook! https://www.facebook.com/FurySoftware/
wlape3
Posts: 50
Joined: Fri Sep 13, 2013 9:53 pm
Location: Northeast US

RE: Bugs

Post by wlape3 »

I found another bug. Happens every time I try to land paras.

FAILED(animate_tile_control_update_after_land_unit_move): Segmentation violation
"We have met the enemy and he is us." - Pogo Possum
Benedict151
Posts: 407
Joined: Fri Mar 04, 2016 10:16 am

RE: Bugs

Post by Benedict151 »

Hello walpe3
I'm sorry you are encountering this error, we thought we had found and fixed this.

Can I just check you are using the latest official version (v1.03)?

regards
Ben Wilkins
wlape3
Posts: 50
Joined: Fri Sep 13, 2013 9:53 pm
Location: Northeast US

RE: Bugs

Post by wlape3 »

Actually, I am using the latest beta which I saw announced April 21st. It is with this one the trouble began.

Will
"We have met the enemy and he is us." - Pogo Possum
Benedict151
Posts: 407
Joined: Fri Mar 04, 2016 10:16 am

RE: Bugs

Post by Benedict151 »

Hello walpe3
The paratrooper bug was believed fixed in v1.02 (and no one has reported it since as far as I'm aware)

I dropped some paratroopers this morning and it was fine (which is no consolation at all I know)

If it is possible to receive the following it would be fantastic and really help us track things down

1) The contents of the ERROR folder that is generated in your Users\<your name>\My Documents\My Games\Strategic Command - WWII War in Europe\ERROR folder.

2) Steps to reproduce the error and any information on whether it was repeatable or not.

Can you send this information to Hubert at hcater@furysoftware.com


Unfortunately our annual developers conference is being held this week so wen't be able to look at creating a fix
until the start of May. I am sorry for the delay and frustration caused

regards
Ben Wilkins

User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

Sleep Mode doesn't always seem to be working for Air Units. I'm using v1.03.01 Beta and sometimes my fighters assigned to Sleep will still provide Escort and take casualties. This isn't new to this version, as I have noticed it in older versions, but this time I'm pretty sure I caught it and I have a save file if needed.
User avatar
crispy131313
Posts: 2125
Joined: Fri Nov 29, 2013 11:37 pm

RE: Bugs

Post by crispy131313 »

I thought sleep was to take units out of the "next unit" cycle and to avoid them flashing on the map? Otherwise it's for planning and does not effect gameplay in anyway.
Fall Weiss II - SC3 Mod
tm.asp?m=4183873

User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

Well no wonder it doesn't work !

Another case of 'I should read the manual first, before assuming what something means'.
User avatar
crispy131313
Posts: 2125
Joined: Fri Nov 29, 2013 11:37 pm

RE: Bugs

Post by crispy131313 »

I've never read the manual either I just remember it from SC2 :)
Fall Weiss II - SC3 Mod
tm.asp?m=4183873

User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

I will try and the explain the stupid thing I did that uncovered a rare weird thing.
Me Allies vs. computer Axis, v1.05. I did a Torch by declaring war on Algeria from the Diplomacy box. This caused Vichy France [which was High > Axis already] to go 100% Axis, which I observed in the Diplomacy box without having to leave it.
So I am looking at the 'Vichy France 100%' in the Diplomacy box, and I think 'Maybe I can throw a few chits on them and change their mind'. So I put 2 USA chits on 100% Axis V.F., then exit the the Diplomacy box. I get the message that V.F. has joined the Axis [oh well, my stupid idea didn't work]. But, the 2 USA chits I put on V.F. are gone. I've played several turns and the USA only has a total of 3 now [they have 2 on Spain and 1 on Sweden, and none in the kitty].

While in the Diplomacy box, if we declare war on a country the diplomacy will reset and show that country at 100% to the other side. If we then switch countries, say from USA to UK, that country is then removed from the list, so that the UK cannot put diplomacy on it. I think this is maybe where wires get crossed, as when we declare war and a country goes 100%, that it should be removed from the list, if it was the target of the DoW or if it is a country that went 100% by reaction. I think ?
User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

A small bug that has been around forever but I've never gotten around to reporting it.

Right Click on the Sub to change it to Hunt Mode.

Image
Attachments
SC3d12.jpg
SC3d12.jpg (94.09 KiB) Viewed 884 times
User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

The possible movement hexes are highlighted, but the unit cannot move.

Image
Attachments
SC3d13.jpg
SC3d13.jpg (96.89 KiB) Viewed 884 times
User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

We need to Left Click on the unit again in order to be able to move it.

Image
Attachments
SC3d14.jpg
SC3d14.jpg (102.47 KiB) Viewed 884 times
rocketman71
Posts: 489
Joined: Tue Feb 20, 2007 8:43 pm

RE: Bugs

Post by rocketman71 »

Yes, I have noticed that too with subs.
User avatar
Hubert Cater
Posts: 5999
Joined: Mon Jul 22, 2013 11:42 am
Contact:

RE: Bugs

Post by Hubert Cater »

I believe this is fixed with the last beta as I am unable to recreate this, is it possible to confirm if either of you is using the v1.09.06 Beta?

User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

I am not on 1.09.06 yet. I will get it soon and test it out and let you know. Also, I posted this issue while using the 653N Mod. I generally only post after I have tested with the stock campaign, but it slipped my mind this time. [:(]
User avatar
sPzAbt653
Posts: 10049
Joined: Thu May 03, 2007 7:11 am
Location: east coast, usa

RE: Bugs

Post by sPzAbt653 »

This does not happen with 1.09.06 in either the stock campaign nor in 653N. Thanks for doing such quick work [;)]
User avatar
Hubert Cater
Posts: 5999
Joined: Mon Jul 22, 2013 11:42 am
Contact:

RE: Bugs

Post by Hubert Cater »

Great to hear, thanks [:)]
Jack59
Posts: 53
Joined: Wed Jan 02, 2008 11:17 pm

Re: sPzAbt653

Post by Jack59 »

Looking at your snip I think you need two naval units to blockade the port and reduce it's supply. See the invasion of Malta example.
sschnar1
Posts: 104
Joined: Wed May 17, 2017 8:57 pm

RE: Bugs

Post by sschnar1 »

I am running 1.09.06 Single Player with Allied AI.

I have not noticed this problem on any my other games that reached 1945 of the previous versions, but it is getting PAINFULLY SLOW. Upwards of 40 minutes doing just 'THINKING (Combat I) ...', btw: '...' is not cycling, it looks like all is stopped, Task Manager indicates that it is still processing consuming 29% CPU time.

This slowness started around APRIL 1945 and was getting longer and longer, it is now APRIL 1946 with delays up to 40 minutes just doing (Combat I). This reminds me of the old days where computers had to sort out available memory. I suspect some sort of AI Decision is having an issue.

I would attach the game file(s) but I don't see how to attach it here.



Post Reply

Return to “Strategic Command WWII War in Europe Public Beta”