WitPTracker AE Release 1.11 Available!

[CapAndGown]

ORIGINAL: floydg

ORIGINAL: cap_and_gown

I just downloaded the tracker about a week ago. In the regions settings it has Gifu as part of the Soviet Union. This is obviously wrong. Is there another version of the regions file I can use?

For better mappings, use the File > Import Base-Region Definitions and select one of the files in the region-mappings folder.

You can also manually edit the mappings as you wish by left-clicking in the Region cell in the Bases panel.

There are only two there. One is by Nomad apparently. I am assuming the other one is the default?

[floydg]

ORIGINAL: cap_and_gown

ORIGINAL: floydg

ORIGINAL: cap_and_gown

I just downloaded the tracker about a week ago. In the regions settings it has Gifu as part of the Soviet Union. This is obviously wrong. Is there another version of the regions file I can use?

For better mappings, use the File > Import Base-Region Definitions and select one of the files in the region-mappings folder.

You can also manually edit the mappings as you wish by left-clicking in the Region cell in the Bases panel.

There are only two there. One is by Nomad apparently. I am assuming the other one is the default?

Use the one by Nomad. There may be some issues with it and he posted an updated version several pages back in this thread.

[CapAndGown]

ORIGINAL: floydg

ORIGINAL: cap_and_gown

ORIGINAL: floydg



For better mappings, use the File > Import Base-Region Definitions and select one of the files in the region-mappings folder.

You can also manually edit the mappings as you wish by left-clicking in the Region cell in the Bases panel.

There are only two there. One is by Nomad apparently. I am assuming the other one is the default?

Use the one by Nomad. There may be some issues with it and he posted an updated version several pages back in this thread.

I found it and imported it. On the DOS command screen I got a bunch of java exceptions listed. But after exiting the tracker and restarting everything seems OK. Is this normal behavior to have all these error messages listed when importing a new region definition file?

Anyway, it does seem to have worked.

Also - from looking at the industry screen, it seems that only regions where you currently own bases are listed. For instance, there is no Sumatra or Java. Is this correct?

Thanks

[Nomad]

Which one of my region files did you use? version 4 has some name problems after the last patch, and version 4a cleared those up. there is a version 5 here to version 5 which also takes care of the name changes and is a bit better organized.

Most likely if you got a bunch of java errors you used version 4 which was made before patch 2. You can just download the linked one above and use it with no problems.

[CapAndGown]

ORIGINAL: Nomad

Which one of my region files did you use? version 4 has some name problems after the last patch, and version 4a cleared those up. there is a version 5 here to version 5 which also takes care of the name changes and is a bit better organized.

Most likely if you got a bunch of java errors you used version 4 which was made before patch 2. You can just download the linked one above and use it with no problems.

I used the one you just linked to.

[CapAndGown]

Another question: if understand things correctly, resources and oil will move freely between Honshu, Shikoku and Kyshu, yes? If so, I am going to merge these three regions. But I want to make sure that these three islands really do share resources and fuel.

[n01487477]

Also - from looking at the industry screen, it seems that only regions where you currently own bases are listed. For instance, there is no Sumatra or Java. Is this correct?

Correct, we don't show enemy base info or regions that don't have bases yet captured. They will appear after you've done that.

Another question: if understand things correctly, resources and oil will move freely between Honshu, Shikoku and Kyshu, yes? If so, I am going to merge these three regions. But I want to make sure that these three islands really do share resources and fuel.

As far as I know you can merge these three, Hokkaido is another matter though.

As to the Region Definitions, there is one blank line space at the end of the file, version 5, which causes a slight problem (I've fixed it - removed the space) and will send to FLoyd for inclusion. Thanks again to Nomad.

[Nomad]

I can't remember if this has been discussed so I'll throw it out quick. Are you planning to add the skills to the pilots screens?

[floydg]

ORIGINAL: Nomad

I can't remember if this has been discussed so I'll throw it out quick. Are you planning to add the skills to the pilots screens?

I can't remember if it's been discussed either... [;)]

Not sure what's involved, but I can take a peek.

[n01487477]

ORIGINAL: floydg

ORIGINAL: Nomad
I can't remember if this has been discussed so I'll throw it out quick. Are you planning to add the skills to the pilots screens?

I can't remember if it's been discussed either... [;)]

Not sure what's involved, but I can take a peek.

Better in a history sense rather than straight, or as a hidden toggle, there are loads of data points here.

Just sent Floyd my final code ... so you know what that means [;)]

[edit] Might as well add a picture of the new chart (res&Prod) - the global stuff needed some spice!

[ny59giants]

Guys,

I am attempting to play JuanG's Enhanced BB mod. I can load Tracker OK, except the Mike fighters are MIA.

Game file sent to Damian.

[floydg]

Can you send to witptracker@gmail.com?
EDIT: disregard - Damian tracked it down.

[n01487477]

ORIGINAL: ny59giants
Guys,
I am attempting to play JuanG's Enhanced BB mod. I can load Tracker OK, except the Mike fighters are MIA.
Game file sent to Damian.

Well if he insists on putting them in the editor before the allocated area for IJNAF planes, then Tracker isn't going to pick them up ... He has 100's of slots available and insists on putting them before this (slot 600)definition ... I'll have to rework it, but I'm not too pleased. I'll see if I can get it to work properly before Floyd compiles - but you might have to wait until the release after next.

[ny59giants]

Damian,
Thanks for the assist. I had just gone into the Editor myself and saw they were with an ID below 600. I just posted this in his mod development thread and brought this reason up. Did you see any other errors?? I want to make sure it comes up OK with Tracker before I start my first turn orders.

[n01487477]

ORIGINAL: ny59giants

Damian,
Thanks for the assist. I had just gone into the Editor myself and saw they were with an ID below 600. I just posted this in his mod development thread and brought this reason up. Did you see any other errors?? I want to make sure it comes up OK with Tracker before I start my first turn orders.

Everything else seems to load fine, just this seems out of whack...in the aircraft Tab, they are read. I think for now we can't support this mod fully (just these 6 a/c) and I'm worried that it might cause problems if I do a quick fix ... Michael, sorry - use Tracker for the mod, but mind that these planes are not accounted for... maybe after doing some more testing I'll get something ready for next time. There is just too much based on that 600 slot definition at present.
Cheers
Damian

[ny59giants]

Damian,

I just asked JuanG to move those 6 planes.

Thanks,
Michael

[Kull]

While trying to wrap my head around the Australian Production system (JFBs can stop laughing now [;)]), I spotted a few minor industry elements which are present on the map, yet missing from the WitP Tracker reporting, specifically:

Maryborough - Light Industry (20)
Portsea - Resources (20)

(Using a download from a fresh start, Patch 2, Scenario 2 game on 12/8/41)

[Nomad]

They both show up on mine. What region file are you using?

[Kull]

ORIGINAL: Nomad

They both show up on mine. What region file are you using?

The default one which came with the download. What's odd is that I just spotted a similar absence in Burma (Mergui), and the one thing the "missing" locations have in common is a Location ID in the 1400 range. But if you are seeing them in your reports, I have no idea why that would only be affecting me?

[Kull]

Actually, I'm almost certain it's "not just me". Here's an excerpted quote from the Australian Industry thread. Note the highlighted figures. Those are EXACTLY what you get from the WitP Tracker reporting, absent the on-map data from Maryborough & Portsea:

ORIGINAL: wwengr

<snip>

Industry Components in OZ –

Manpower – 79 (395 Manpower Points per day)
Oil – 10 (100 Oil Points per day)
Resources – 3190 (63,800 Resource Points per day)
Refinery – 55 (Converts 550 Oil Points per day into 495 Fuel Points and 55 Supply Points)
Light Industry – 2750 (Converts 41,250 Resource Points per day into 2,750 Supply Points)
Heavy Industry – 1120 (Converts 22,400 Resource Points plus 2,240 Fuel Points per day into 2,240 Heavy Industry Points and 2,240 Supply Points)
Repair Shipyard – 53 (Uses nothing, but can cause accelerated use of supply for ship repair)

<snip>