JTCS meets PG3D "WWII" / "Cold War"
Moderator: Jason Petho
RE: JTCS meets PG3D mod-upgrade
Hallo auHobbes37
I cant find this article - can you scan it an send me ?
Thanks H.Balck
I cant find this article - can you scan it an send me ?
Thanks H.Balck
RE: JTCS meets PG3D mod-upgrade
Herr Balck,
Firstly, sorry I don't speak or write any German, but I got to tell you I just finally got around to playing some of your JTCS meets PG3D the Ardennes, and I'm really impressed!! You've put alot into this, I like the whole operational feel to it, the sounds are great, it plays great and the attention to detail is first-rate!! Thank you very much for this, I'm enjoying it much!!
Best regards,
Mike
Firstly, sorry I don't speak or write any German, but I got to tell you I just finally got around to playing some of your JTCS meets PG3D the Ardennes, and I'm really impressed!! You've put alot into this, I like the whole operational feel to it, the sounds are great, it plays great and the attention to detail is first-rate!! Thank you very much for this, I'm enjoying it much!!
Best regards,
Mike
RE: JTCS meets PG3D mod-upgrade
Hello,
I like the work, the map looks good, but I cannot help being reminded of the exact same map area covered by the Avalon Hill boardgame, "The longest Day", released sometime in 1980/81. I bought the game and played it several times, it was massive for it's day. The scale, if I remember correctly, was compatible with the CS, as well as unit scale.
In any event, once 1.03 patch id released, I look forward to trying your Mod.
Keep up the good work!
I like the work, the map looks good, but I cannot help being reminded of the exact same map area covered by the Avalon Hill boardgame, "The longest Day", released sometime in 1980/81. I bought the game and played it several times, it was massive for it's day. The scale, if I remember correctly, was compatible with the CS, as well as unit scale.
In any event, once 1.03 patch id released, I look forward to trying your Mod.
Keep up the good work!
-
- Posts: 1156
- Joined: Wed Apr 27, 2005 5:10 am
- Location: Los Osos, CA
RE: JTCS meets PG3D mod-upgrade
Hallo H. Balck!
Also tried your Ardennes scenario.....very impressive![&o]
Armor movement sounds like helicopter....intentional?
Also tried your Ardennes scenario.....very impressive![&o]
Armor movement sounds like helicopter....intentional?
"If you want peace, prepare for war."
RE: JTCS meets PG3D mod-upgrade
Hi Balck,
habe eben deine version 1.2 gezogen + den normandiepatch. Vorfreude war riesig nur leider schmieren die szenarios Lesna und Normandie gleich nach dem menüfeld "Seitenauswahl und Regeln" ab [&:]
ansonsten laufen alle szenarien. Wie gesagt beide laden bis zu diesem menü und sobald man dort auf ok klickt schmiert das spiel ab.
Die menümusik ist klasse!!! PG eben [:D]
Wie juggalo schon sagte. Die panzersounds klingen echt wie die eines helikopters. In einer deiner alten betas klang das besser finde ich. Vielleicht kannst du das ja im nächsten patch ändern [:)]
habe eben deine version 1.2 gezogen + den normandiepatch. Vorfreude war riesig nur leider schmieren die szenarios Lesna und Normandie gleich nach dem menüfeld "Seitenauswahl und Regeln" ab [&:]
ansonsten laufen alle szenarien. Wie gesagt beide laden bis zu diesem menü und sobald man dort auf ok klickt schmiert das spiel ab.
Die menümusik ist klasse!!! PG eben [:D]
Wie juggalo schon sagte. Die panzersounds klingen echt wie die eines helikopters. In einer deiner alten betas klang das besser finde ich. Vielleicht kannst du das ja im nächsten patch ändern [:)]
RE: JTCS meets PG3D mod-upgrade
jepp!
Den fehler habe ich auch
aber eben nur bei diesen beiden szenarien
Habe JTCS + patch 1.02 installiert
Den fehler habe ich auch

aber eben nur bei diesen beiden szenarien

Habe JTCS + patch 1.02 installiert
RE: JTCS meets PG3D mod-upgrade
Thanks for all your posts !
Here is the correct normandy scenario with all new features (historian play round 1 to 110)
Please copy the hotfix-file in your JTCS meets PG3D WWII-file and I hope you can play the great normandy-scenario without errors.
Hotfix:
go to new version 1.03 !!!
Have fun and do you like a team-play normandy send me an e-mail (weinertweinertm@aol.com)
Than we can play with correct night and day-turns, weathersituations and historically airsupport.
H.Balck

Here is the correct normandy scenario with all new features (historian play round 1 to 110)
Please copy the hotfix-file in your JTCS meets PG3D WWII-file and I hope you can play the great normandy-scenario without errors.
Hotfix:
go to new version 1.03 !!!
Have fun and do you like a team-play normandy send me an e-mail (weinertweinertm@aol.com)
Than we can play with correct night and day-turns, weathersituations and historically airsupport.
H.Balck

RE: JTCS meets PG3D mod-upgrade
Hm ... I have tested the patch for e few minutes but I have still the same error in this two scenarios 
I have copied the files in the WW2 directory or is it important to delete some files before?

I have copied the files in the WW2 directory or is it important to delete some files before?
RE: JTCS meets PG3D mod-upgrade
Hallo Wittmann
Wenn du Lesna sehen willst, mußt du die LCG-Kampagne 18.PD spielen. Beim Einzelszenario liegt ein Fehler vor, den ich im Moment nicht finde. Das Regenszenario ist dort der 27.Juni 1941.
OK schon wieder Fehlermeldungen - verstehe ich nicht - bei mir und 2 anderen Computern läuft alles super - auch Lesna. Vielleicht habe ich bei der setup-datei irgenwas gelöscht, was ihr dann nicht habt. Ich werde gegen 18:00 Uhr MEZ mal ne neue setup zum download abstellen.
Gruß
Wenn du Lesna sehen willst, mußt du die LCG-Kampagne 18.PD spielen. Beim Einzelszenario liegt ein Fehler vor, den ich im Moment nicht finde. Das Regenszenario ist dort der 27.Juni 1941.
OK schon wieder Fehlermeldungen - verstehe ich nicht - bei mir und 2 anderen Computern läuft alles super - auch Lesna. Vielleicht habe ich bei der setup-datei irgenwas gelöscht, was ihr dann nicht habt. Ich werde gegen 18:00 Uhr MEZ mal ne neue setup zum download abstellen.
Gruß
RE: JTCS meets PG3D mod-upgrade
OK das ist natürlich schade!
Aber den selben Fehler habe ich beim normandieszenario auch. Alle anderen Szenarios laufen aber die beiden eben nicht. Es lädt ja sogar nur habe ich den fehler wenn ich nach der "seitenauswahl" auf ok klicke.
Ist vielleicht in der normandie auch regen oder etwas neues eingebaut was probleme machen könnte?
P.S. Das mit der Musik ist echt klasse!
Aber den selben Fehler habe ich beim normandieszenario auch. Alle anderen Szenarios laufen aber die beiden eben nicht. Es lädt ja sogar nur habe ich den fehler wenn ich nach der "seitenauswahl" auf ok klicke.
Ist vielleicht in der normandie auch regen oder etwas neues eingebaut was probleme machen könnte?
P.S. Das mit der Musik ist echt klasse!
RE: JTCS meets PG3D mod-upgrade
Nein - da ist kein Regen, aber jede Menge neuer Einheiten. Ich denke, es müßte mit der neuen setup funktionieren.
Gruß
Gruß
RE: JTCS meets PG3D mod-upgrade
Ich bin wie folgt vorgegangen
Setup 1.2 installiert
Hotfix normandie drüber
und nun darüber deinen letzten patch
den alten ordner habe ich natürlich vorher gelöscht
Setup 1.2 installiert
Hotfix normandie drüber
und nun darüber deinen letzten patch
den alten ordner habe ich natürlich vorher gelöscht
RE: JTCS meets PG3D mod-upgrade
Here are the new JTCS meets PG3D WWII v.1.03. Now I hope the normandy-scn is OK.
Clean the old JTCS meets PG3D WWII and install the new version 1.03.
http://files.filefront.com/JTCS+meets+PG3D+v103exe/;10121200;/fileinfo.html
H.Balck
Clean the old JTCS meets PG3D WWII and install the new version 1.03.
http://files.filefront.com/JTCS+meets+PG3D+v103exe/;10121200;/fileinfo.html
H.Balck
RE: JTCS meets PG3D mod-upgrade
Version 1.02 gelöscht und Version 1.03 installiert ... selber Fehler 
Kann es vielleicht sein das deine "komplette" version schon features beinhaltet auf die das scenario zugreift welche aber nicht in der "demo" enthalten sind?

Kann es vielleicht sein das deine "komplette" version schon features beinhaltet auf die das scenario zugreift welche aber nicht in der "demo" enthalten sind?
RE: JTCS meets PG3D mod-upgrade
Ich habe meinen derzeitigen Spielordner JTCS meets PG3D WWII komplett in die setup verschoben. Du hast also genau die gleichen Dateien wie ich, nur das bei mir und auch auf meinem Laptop alles mustergültig läuft, auch nach der Installation der version 1.03.
Ich weiß ehrlich gesagt nicht, an was das liegt.
H.Balck
Ich weiß ehrlich gesagt nicht, an was das liegt.
H.Balck
-
- Posts: 1156
- Joined: Wed Apr 27, 2005 5:10 am
- Location: Los Osos, CA
RE: JTCS meets PG3D mod-upgrade
Wittman, did you properly uninstall V1.02 from Control Panel > Add/Remove Programs?
I'm downloading 1.03 right now...will let you know if I also have problems.
ChadG
I'm downloading 1.03 right now...will let you know if I also have problems.
ChadG
"If you want peace, prepare for war."
RE: JTCS meets PG3D mod-upgrade
Hallo Wittmann
Hier mal der Versuch eines PBEM-Spiels, vielleicht läuft das ja. Ich habe angefangen, du nimmst die Deutschen.
http://files.filefront.com/Normandyzip/;10121580;/fileinfo.html
Wenn es läuft gib mir Nachricht !
H.Balck (weinertweinertm@aol.com)
Hier mal der Versuch eines PBEM-Spiels, vielleicht läuft das ja. Ich habe angefangen, du nimmst die Deutschen.
http://files.filefront.com/Normandyzip/;10121580;/fileinfo.html
Wenn es läuft gib mir Nachricht !
H.Balck (weinertweinertm@aol.com)
-
- Posts: 1156
- Joined: Wed Apr 27, 2005 5:10 am
- Location: Los Osos, CA
RE: JTCS meets PG3D mod-upgrade
Normandie scenario in new 1.03 installation crashes immediately to desktop after picking sides.
I choose Allies as Manual Control, Axis as Computer with FOW.
[&:]
I choose Allies as Manual Control, Axis as Computer with FOW.
[&:]
"If you want peace, prepare for war."
RE: JTCS meets PG3D mod-upgrade
nein geht nicht
schmiert ab sobald ich auf "wollen Sie den Zug sehen" klicke
gibt es vielleicht eine log datei die beschreibt woran es liegt? So das du auch sehen kannst woran es liegen könnte?
@Juggalo
yes this is my error
schmiert ab sobald ich auf "wollen Sie den Zug sehen" klicke
gibt es vielleicht eine log datei die beschreibt woran es liegt? So das du auch sehen kannst woran es liegen könnte?
@Juggalo
yes this is my error

RE: JTCS meets PG3D mod-upgrade
Hallo Wittmann
Solch eine Datei gibt es nicht. Ich weiß auch nicht woran es liegt, bei mir läuft alles.
Sehr komisch...
Hast Du mal die LCG 18.PD angespielt ?
H.Balck
Solch eine Datei gibt es nicht. Ich weiß auch nicht woran es liegt, bei mir läuft alles.
Sehr komisch...
Hast Du mal die LCG 18.PD angespielt ?
H.Balck