WitPTracker AE Release 1.11 Available!

[BigDuke66]

Is there a way of filtering out units(LCUs) that are separated and can be merged into a bigger formation?
Or something similar for air groups?

[floydg]

ORIGINAL: BigDuke66

Is there a way of filtering out units(LCUs) that are separated and can be merged into a bigger formation?
Or something similar for air groups?

With the change I made for the next release, you can sort on the new "Parent" column in the LCU panel and that will show you.

For the air groups, I didn't add that yet...

[BigDuke66]

GREAT! [&o]

[floydg]

ORIGINAL: cantona2

ORIGINAL: floydg

ORIGINAL: cantona2

Is it possible to have an alert letting us know when a unit has upgraded its TO&E please? I know we already get the one letting us know TO&E can upgrade but another one letting us know which unit in particular has upgraded would be of great help, especially in Australia where the Australia Command gets to move from one end to another lending its support to upgrading units

Do you have a pair of saves (before and after) so that I can test this out?

Floyd

Before and after emails sent
Cheers

Thanks. Tested and it works.

Floyd

[cantona2]

ORIGINAL: floydg

ORIGINAL: cantona2

ORIGINAL: floydg




Do you have a pair of saves (before and after) so that I can test this out?

Floyd

Before and after emails sent
Cheers

Thanks. Tested and it works.

Floyd

Great! [&o]

[BigDuke66]

Is there a problem with listing LCUs that reached their destination in the alert screen?
I can see it in the LCU screen under history, unit was in Batangas(79,78) on turn 6 with destination set to Lucena and arrived at Lucena(79,79) on turn 7 but I can't find anything in the Alert screen for it.

It would also be nice to have another row on the LCU screen with the destination a unit is moving to and also a filter that allows us to see units in move mode but without destination, effectively showing either "arrived at destination" or "forgot to set destination" units.

[floydg]

ORIGINAL: BigDuke66

Is there a problem with listing LCUs that reached their destination in the alert screen?
I can see it in the LCU screen under history, unit was in Batangas(79,78) on turn 6 with destination set to Lucena and arrived at Lucena(79,79) on turn 7 but I can't find anything in the Alert screen for it.

It usually works. If you have a specific example you want me to check out, you'll need to send a save before the LCU reaches the destination and a save after it reaches it. Send to witptracker @ gmail.com.

It would also be nice to have another row on the LCU screen with the destination a unit is moving to and also a filter that allows us to see units in move mode but without destination, effectively showing either "arrived at destination" or "forgot to set destination" units.

Let me look into that.

[BigDuke66]

Thanks, I've sent you a mail with an example regarding the 71st ID in Manila hope you can track the error down.

[BigDuke66]

ORIGINAL: floydg

ORIGINAL: BigDuke66
It would also be nice to have another row on the LCU screen with the destination a unit is moving to and also a filter that allows us to see units in move mode but without destination, effectively showing either "arrived at destination" or "forgot to set destination" units.

Let me look into that.

In addition to that getting all the rows that are in the history pop-up also on the main LCU screen would be helpful too, I'm talking about the "Combat", "Destination" & "March row"(I wonder why they are in the history pop-up anyway, why should I be interested in seeing what combat mode the unit had many turns ago).
With that you could maybe then put just another row in called "Location matches Destination" with the results being Yes/No when comparing the location & destination rows.

[AcePylut]

I get the following error... didn't get it before...

[PaxMondo]

Guys, feature suggestion: on the air group screen, can you show max planes for the group like you do for the pilots?  9[24] or something like that?
 
Be handy when checking groups for allocating a/c pools.
 
Thanks

[Erkki]

I have a weird issue of my own. Palembang doesnt show up in the tracker... PBEM end of Jan 42 as Japanese player. Oosthaven and all the other bases on Sumatra show up, but not Balembang. Its not in the base list and its oil/fuel production doesnt show up in the industry charts. Any ideas? In the bases screen, I have all countries selected from all regions and it shows all bases but Balembang.

edit: its Palemgbang, not Balemgang. Wasted 5 turns scratching my head. [:D]

[floydg]

ORIGINAL: AcePylut

I get the following error... didn't get it before...

Which version are you running? I thought we fixed that...

[PaxMondo]

Basic questions here, I'm a little slow.  Can you clarify a few of your definitions?  THanks.

On the Device Screen, you have the following columns: Pool, Need, Used,Draw, ...

Pool = # devices available to be moved into a unit
Need = Total delta between TOE and actual unit device loads (?)
Used = game (month?, day?) usage of device (?)
Draw = ???

Then on the History screen for a specific device you have (on the bottom half): Amt, TOE, Delta, Repl

Amt = current # of devices in that unit
TOE = current TOE of that device in that unit
Delta = ??? (Somethimes this looks like Amt - TOE, but most of the time it is a value that I cannot reconcile ... like 26 - 36 = 0)  Is this not yet fully implemented?

Thanks for a great tool.  Very useful. 

PS: running 1.7.1 ...

[floydg]

ORIGINAL: PaxMondo

Guys, feature suggestion: on the air group screen, can you show max planes for the group like you do for the pilots?  9[24] or something like that?

Be handy when checking groups for allocating a/c pools.

Thanks

But "Max Planes" is already a column in the table...

[floydg]

ORIGINAL: Erkki

I have a weird issue of my own. Palembang doesnt show up in the tracker... PBEM end of Jan 42 as Japanese player. Oosthaven and all the other bases on Sumatra show up, but not Balembang. Its not in the base list and its oil/fuel production doesnt show up in the industry charts. Any ideas? In the bases screen, I have all countries selected from all regions and it shows all bases but Balembang.

edit: its Palemgbang, not Balemgang. Wasted 5 turns scratching my head. [:D]

[;)]

[floydg]

See edits in-line.

ORIGINAL: PaxMondo

Basic questions here, I'm a little slow.  Can you clarify a few of your definitions?  THanks.

On the Device Screen, you have the following columns: Pool, Need, Used,Draw, ...

Pool = # devices available to be moved into a unit
Need = Total delta between TOE and actual unit device loads (?) Correct - we compute that
Used = game (month?, day?) usage of device (?) This comes from the save file, so it should be the Used So Far column from the Industry/Troops/Resource Pool window in the game
Draw = ??? Used from pool last turn - we compute that

Then on the History screen for a specific device you have (on the bottom half): Amt, TOE, Delta, Repl

Amt = current # of devices in that unit
TOE = current TOE of that device in that unit
Delta = ??? (Somethimes this looks like Amt - TOE, but most of the time it is a value that I cannot reconcile ... like 26 - 36 = 0)  Is this not yet fully implemented? It's fully implemented. It should always be the current turn's count - last turn's count

Thanks for a great tool.  Very useful. 

PS: running 1.7.1 ...

[PaxMondo]

ORIGINAL: floydg

ORIGINAL: PaxMondo

Guys, feature suggestion: on the air group screen, can you show max planes for the group like you do for the pilots?  9[24] or something like that?

Be handy when checking groups for allocating a/c pools.

Thanks

But "Max Planes" is already a column in the table...

Duh, you mean to tell me that Max Planes is max planes? [:D] Please don't make it so confusing in the future. Try to obscure it a bit more ... [;)]

(Sorry for my bad eyesight ... easy to see how my opponents can sneak up on me now .... )

[PaxMondo]

see my edits and thanks!!!

ORIGINAL: floydg

See edits in-line.

ORIGINAL: PaxMondo

Basic questions here, I'm a little slow.  Can you clarify a few of your definitions?  THanks.

On the Device Screen, you have the following columns: Pool, Need, Used,Draw, ...

Pool = # devices available to be moved into a unit
Need = Total delta between TOE and actual unit device loads (?) Correct - we compute that
Used = game (month?, day?) usage of device (?) This comes from the save file, so it should be the Used So Far column from the Industry/Troops/Resource Pool window in the game
Draw = ??? Used from pool last turn - we compute that Ah, very usfeul number that THANKS!


Then on the History screen for a specific device you have (on the bottom half): Amt, TOE, Delta, Repl

Amt = current # of devices in that unit
TOE = current TOE of that device in that unit
Delta = ??? (Somethimes this looks like Amt - TOE, but most of the time it is a value that I cannot reconcile ... like 26 - 36 = 0)  Is this not yet fully implemented? It's fully implemented. It should always be the current turn's count - last turn's count Used Ah, time base is previous turn. Very good. Thanks for clarifying for me!!


Thanks for a great tool.  Very useful. 

PS: running 1.7.1 ...

[Nomad]

Hi Damien and floyd

In the ship display tab, under classes there are choices for LCI, LCI(R), LCI(G), and LCI(M). But no ships show up when any of the LCI(x) are chosen, they all show up when LCI is chosen.