Automatic Retrofit

Post bug reports and ask for support here.

Moderators: Icemania, elliotg

Post Reply
User avatar
Kruos
Posts: 130
Joined: Wed May 05, 2010 8:43 pm
Location: France

Automatic Retrofit

Post by Kruos »

I dont understand how automatic retrofit works.

I have done some research and I have now new design available in the design screen. For example my last LSP-6 design now have some fighter bays. But strangely, my LSP seems to be stuck in its old LSP-1 design, if I do not tell him manually to retrofit, it does not retrofit, whereas everything is set in auto.

Initially I was thinking of a money issue, but no it is not that, I have lot of money.

Could it be ressources related? Could someone give me a clue of how it works please.

EDIT: Also, I have never seen a prompt message to inform me of the retrofit possibility (when I research a new component). I suppose it is normal as in the empire policy screen, all ship/base type are set to be automaticly retrofited.
Bingeling
Posts: 5186
Joined: Thu Aug 12, 2010 11:42 am

RE: Automatic Retrofit

Post by Bingeling »

Do you have suggest on ship and base building?

I think the "auto retrofit" is about the "retrofit all ships and bases" prompt. If they have auto retrofit, they will retrofit after this, if not, they won't. And this prompt probably depends on that 'suggest' setting.

I may be mistaken, though, I am no big fan at approving that prompt.
User avatar
Kruos
Posts: 130
Joined: Wed May 05, 2010 8:43 pm
Location: France

RE: Automatic Retrofit

Post by Kruos »

ORIGINAL: Bingeling

Do you have suggest on ship and base building?

I think the "auto retrofit" is about the "retrofit all ships and bases" prompt. If they have auto retrofit, they will retrofit after this, if not, they won't. And this prompt probably depends on that 'suggest' setting.

I may be mistaken, though, I am no big fan at approving that prompt.

Thanks Bingeling for the reply.

No I have nothing on 'suggest'. I like to play with everything in 'manual', except the 'ship design'. In Legends when a new component was researched, I was used to have a prompt box message asking me if I wanted to retrofit base or ships. I cant figure how to prompt this box in Shadows, whereas in my empire policy screen it is checked.

It is quite confusing because I have new designs, everything is set in auto-retrofit, and even after some long time, nothing happen, my ships do not retrofit, neither my bases nor my fleet ships.

I am missing something, but I dont see what.

EDIT: I was thinking initially to something related to ressource shortages, but not sure as I do not have any message of shortage.
User avatar
Erik Rutins
Posts: 39652
Joined: Tue Mar 28, 2000 4:00 pm
Location: Vermont, USA
Contact:

RE: Automatic Retrofit

Post by Erik Rutins »

That prompt will not appear unless you have ship building on Suggest. That worked the same way in Legends as far as I know.
Erik Rutins
CEO, Matrix Games LLC


Image

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/

Freedom is not Free.
User avatar
Tanaka
Posts: 5148
Joined: Tue Apr 08, 2003 3:42 am
Location: USA

RE: Automatic Retrofit

Post by Tanaka »

ORIGINAL: Erik Rutins

That prompt will not appear unless you have ship building on Suggest. That worked the same way in Legends as far as I know.

So ships will not auto retrofit unless you have this prompt turned on?
Image
User avatar
Erik Rutins
Posts: 39652
Joined: Tue Mar 28, 2000 4:00 pm
Location: Vermont, USA
Contact:

RE: Automatic Retrofit

Post by Erik Rutins »

If all automation is turned off, then automatic retrofit will also not happen. If you have advisors or full automation turned on, either of those will allow automatic retrofits to happen. If you have everything set to manual, you can multi-select through the ships and bases screen and use the Retrofit button there for mass retrofits.

Regards,

- Erik
Erik Rutins
CEO, Matrix Games LLC


Image

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/

Freedom is not Free.
Bingeling
Posts: 5186
Joined: Thu Aug 12, 2010 11:42 am

RE: Automatic Retrofit

Post by Bingeling »

I agree with Erik. If I have things on manual, they better not retrofit on their own. One reason is that retrofits can be expensive. And in shadows, money can be sparse if you set things up correctly/wrongly.
User avatar
Kruos
Posts: 130
Joined: Wed May 05, 2010 8:43 pm
Location: France

RE: Automatic Retrofit

Post by Kruos »

Here are some screens of my settings :
Image
Image

And here you can see my LSP, still stuck in LSP-1 design for quite a long time, whereas I have a LSP-8 design available :
Image
Image
User avatar
Kruos
Posts: 130
Joined: Wed May 05, 2010 8:43 pm
Location: France

RE: Automatic Retrofit

Post by Kruos »

ORIGINAL: Erik Rutins

If all automation is turned off, then automatic retrofit will also not happen. If you have advisors or full automation turned on, either of those will allow automatic retrofits to happen. If you have everything set to manual, you can multi-select through the ships and bases screen and use the Retrofit button there for mass retrofits.

Regards,

- Erik

Thank Erik for the help.

So, if I understand well, my ships do not retrofit automaticly because my setting of 'ship building' is set on 'control manually', is it correct?
Bingeling
Posts: 5186
Joined: Thu Aug 12, 2010 11:42 am

RE: Automatic Retrofit

Post by Bingeling »

I agree that with the way those options show, you should get the prompt since you have automated designs. I never read the fine print :)

Putting ship and base building on suggest is not a whole lot of spam, the odd base and ship build suggestion that can safely be ignored.
User avatar
Erik Rutins
Posts: 39652
Joined: Tue Mar 28, 2000 4:00 pm
Location: Vermont, USA
Contact:

RE: Automatic Retrofit

Post by Erik Rutins »

Yes, Ship Building should be set to suggest to enable the advisors to trigger the automatic retrofitting.
Erik Rutins
CEO, Matrix Games LLC


Image

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/

Freedom is not Free.
User avatar
Kruos
Posts: 130
Joined: Wed May 05, 2010 8:43 pm
Location: France

RE: Automatic Retrofit

Post by Kruos »

Ok, I will try this, thanks.
Post Reply

Return to “Tech Support”