unplayable lag time

Post bug reports and ask for game support here.

Moderator: Shannon V. OKeets

User avatar
michaelbaldur
Posts: 4805
Joined: Fri Apr 06, 2007 6:28 pm
Location: denmark

RE: unplayable lag time

Post by michaelbaldur »

ORIGINAL: carpenkm

Is the unplayable lag time still a live issue? I have been experiencing this for a while, mainly around land movement and production, got really bad after Russia in the war. Just updated to latest patch and at first glance it doesnt seem any better. I know my laptop isnt the fastest, so could it be memory or processor?

yes it is still a issue. and it is not your computer.
the wif rulebook is my bible

I work hard, not smart.

beta tester and Mwif expert

if you have questions or issues with the game, just contact me on Michaelbaldur1@gmail.com
carpenkm
Posts: 25
Joined: Tue Mar 25, 2014 6:20 pm

RE: unplayable lag time

Post by carpenkm »

So if its as bad as I'm suffering has anyone actually finished a game? I will be retired by the time I get to 1945.[&:]
User avatar
Viktor_Kormel_slith
Posts: 372
Joined: Thu Nov 14, 2013 9:47 pm

RE: unplayable lag time

Post by Viktor_Kormel_slith »

Yes, that is correct. We suffered it in our first game. It became a nightmare after 1943.In our current we have detected too and the troubles arrive when Russia is at war. I think it must be a hightest priority issue but I´m afraid it´s difficult to fix.[:(]
Sorry, for my bad english! "Wiffing" since 1990 to the tomb!
User avatar
Centuur
Posts: 9083
Joined: Fri Jun 03, 2011 12:03 pm
Location: Hoorn (NED).

RE: unplayable lag time

Post by Centuur »

The problem occurs due to the supply calculations. There has been effort made to reduce the calculation time, but everytime this was tried, regression bugs regarding supply happened and the rules weren't enforced correctly anymore.

Personally, I think we need to live with it...
Peter
carpenkm
Posts: 25
Joined: Tue Mar 25, 2014 6:20 pm

RE: unplayable lag time

Post by carpenkm »

I can understand the complication of calculating supply, but for me the lag makes the game virtually unplayable. Sitting watching an egg timer is no fun! What I dont understand is that even simple moves can hang for example moving a unit in its home country one hex outside a city? Someone in another thread suggested i try the latest beta - will see if this helps.

Viktor - I'm only in mid '42, but all major countries are in the war and active so it's proabably as bad as it is going to get. If not I will need to shave in between impulses!!!
User avatar
Viktor_Kormel_slith
Posts: 372
Joined: Thu Nov 14, 2013 9:47 pm

RE: unplayable lag time

Post by Viktor_Kormel_slith »

When I play solitaire I read a book while pc is computing[:(] Centuur if this can´t work better will be a disaster to the game, I hope Steve thinks something there must be a way
Sorry, for my bad english! "Wiffing" since 1990 to the tomb!
User avatar
michaelbaldur
Posts: 4805
Joined: Fri Apr 06, 2007 6:28 pm
Location: denmark

RE: unplayable lag time

Post by michaelbaldur »

ORIGINAL: Centuur

The problem occurs due to the supply calculations. There has been effort made to reduce the calculation time, but everytime this was tried, regression bugs regarding supply happened and the rules weren't enforced correctly anymore.

Personally, I think we need to live with it...


live with it ..

so customers should live with a unplayable game ..

I hope they give refunds then
the wif rulebook is my bible

I work hard, not smart.

beta tester and Mwif expert

if you have questions or issues with the game, just contact me on Michaelbaldur1@gmail.com
dhucul2011
Posts: 426
Joined: Wed Sep 12, 2007 7:32 pm

RE: unplayable lag time

Post by dhucul2011 »

I'm getting a 30-40 second lag in bringing up the production planning screen for each nation. It just started all of as sudden in the last impulse.

Has this been reported?
carpenkm
Posts: 25
Joined: Tue Mar 25, 2014 6:20 pm

RE: unplayable lag time

Post by carpenkm »

I agree Michael. Some players may have time to spend and other may have lots of books to read [:D] personally I would rather be delivering Stalin a killer blow before I die of old age.
User avatar
Courtenay
Posts: 4396
Joined: Wed Nov 12, 2008 4:34 pm

RE: unplayable lag time

Post by Courtenay »

ORIGINAL: dhucul

I'm getting a 30-40 second lag in bringing up the production planning screen for each nation. It just started all of as sudden in the last impulse.

Has this been reported?
Using 1.2.0.3, my production planning screen is coming up almost instantly, within less than second. This is much faster than it has come up in the past. There is something local to either your game or your computer. Try rebooting; if it still happens, post your game, and let others see if they have the same problem.

(My program says 1.2.0.3, but I am not (yet) a beta tester, and the beta testing functions do not seem to be enabled. I think this is just a glitch in the version number, and I am really running 1.2.0.2.)
I thought I knew how to play this game....
User avatar
AxelNL
Posts: 2389
Joined: Sat Sep 24, 2011 12:43 pm
Location: The Netherlands

RE: unplayable lag time

Post by AxelNL »

ORIGINAL: dhucul

I'm getting a 30-40 second lag in bringing up the production planning screen for each nation. It just started all of as sudden in the last impulse.

Has this been reported?

I had this as well in a recent GW campaign. The turn after it was OK again. My conclusion was that the particular convoy situation of that turn made the resource transportation calculations go skyhigh.
User avatar
WarHunter
Posts: 1174
Joined: Sun Mar 21, 2004 6:27 pm

RE: unplayable lag time

Post by WarHunter »

Just so its clear not everyone plays MWiF as if it was candy canes and lollipops. Here is an example of preliminary production with a 45 sec wait time between nations.

45sec x 9 = 405 sec to complete the Prelim. add another 405sec for final production. It may or may not be faster or slower depending on your computer.

Go ahead download. i double dare ya,

I've had production phases go as high as 1min and 20sec per nation.

As i've posted before. it does not happen all the time.
It does have something to do with the bug ridden convoy code.

This game is currently being played as a 2 player game in solo mode. 1.1.9.2 version
Attachments
45sec.zip
(1.6 MiB) Downloaded 11 times
Image
“We never felt like we were losing until we were actually dead.”
Marcus Luttrell
User avatar
Viktor_Kormel_slith
Posts: 372
Joined: Thu Nov 14, 2013 9:47 pm

RE: unplayable lag time

Post by Viktor_Kormel_slith »

I can live with production delays but I can´t with unplayable lag time when I move each unit in the board! [:-]
Sorry, for my bad english! "Wiffing" since 1990 to the tomb!
User avatar
warspite1
Posts: 42130
Joined: Sat Feb 02, 2008 1:06 pm
Location: England

RE: unplayable lag time

Post by warspite1 »

ORIGINAL: WarHunter

Just so its clear not everyone plays MWiF as if it was candy canes and lollipops. Here is an example of preliminary production with a 45 sec wait time between nations.

45sec x 9 = 405 sec to complete the Prelim. add another 405sec for final production. It may or may not be faster or slower depending on your computer.

Go ahead download. i double dare ya,

I've had production phases go as high as 1min and 20sec per nation.

As i've posted before. it does not happen all the time.
It does have something to do with the bug ridden convoy code.

This game is currently being played as a 2 player game in solo mode. 1.1.9.2 version
warspite1

What does this mean please? I googled it but nothing came up....
Now Maitland, now's your time!

Duke of Wellington to 1st Guards Brigade - Waterloo 18 June 1815
User avatar
Centuur
Posts: 9083
Joined: Fri Jun 03, 2011 12:03 pm
Location: Hoorn (NED).

RE: unplayable lag time

Post by Centuur »

ORIGINAL: WarHunter

Just so its clear not everyone plays MWiF as if it was candy canes and lollipops. Here is an example of preliminary production with a 45 sec wait time between nations.

45sec x 9 = 405 sec to complete the Prelim. add another 405sec for final production. It may or may not be faster or slower depending on your computer.

Go ahead download. i double dare ya,

I've had production phases go as high as 1min and 20sec per nation.

As i've posted before. it does not happen all the time.
It does have something to do with the bug ridden convoy code.

This game is currently being played as a 2 player game in solo mode. 1.1.9.2 version


This one is very long indeed. Never seen it this long. I'm going to report this as a bug. You can live with a small delay of a couple of seconds (even 20-30 is OK, since it is only a couple of times at turns end), but it took me over 3 minutes to get from one major power to the next. That's too much, I believe.
Peter
User avatar
Courtenay
Posts: 4396
Joined: Wed Nov 12, 2008 4:34 pm

RE: unplayable lag time

Post by Courtenay »

On my machine, it took well over a minute, more like a minute and a half.

The British have a trade agreement to send a resource to Russia, and there is no possible way to do so. I wonder if the program is spending time trying to figure out a way to get a resource to Russia?

Also, there are not enough convoys adjacent to Britain to run all the CW factories, so that the program may be trying to figure out a way to get all of the factories running, and does not realize that you can't get 15 resources through 14 convoys.

Aside from that, the convoy network is dead simple, far simpler than in my game, where the change from one country to the next takes less than a second. In my game, though, all resources are able to get to where they want to go, with no frustration.
I thought I knew how to play this game....
User avatar
WarHunter
Posts: 1174
Joined: Sun Mar 21, 2004 6:27 pm

RE: unplayable lag time

Post by WarHunter »

ORIGINAL: warspite1

ORIGINAL: WarHunter

Just so its clear not everyone plays MWiF as if it was candy canes and lollipops. Here is an example of preliminary production with a 45 sec wait time between nations.

45sec x 9 = 405 sec to complete the Prelim. add another 405sec for final production. It may or may not be faster or slower depending on your computer.

Go ahead download. i double dare ya,

I've had production phases go as high as 1min and 20sec per nation.

As i've posted before. it does not happen all the time.
It does have something to do with the bug ridden convoy code.

This game is currently being played as a 2 player game in solo mode. 1.1.9.2 version
warspite1

What does this mean please? I googled it but nothing came up....


Its just my own made up Festus-isms [:'(]

http://www.eviltwin.velvetsofa.com/Curtis/guide.html
Image
“We never felt like we were losing until we were actually dead.”
Marcus Luttrell
Shannon V. OKeets
Posts: 22165
Joined: Wed May 18, 2005 11:51 pm
Location: Honolulu, Hawaii
Contact:

RE: unplayable lag time

Post by Shannon V. OKeets »

ORIGINAL: carpenkm

Is the unplayable lag time still a live issue? I have been experiencing this for a while, mainly around land movement and production, got really bad after Russia in the war. Just updated to latest patch and at first glance it doesnt seem any better. I know my laptop isnt the fastest, so could it be memory or processor?
I would like to have any saved games where Land Movement is causing long delays. I'll see what I can do about reducing the recalculation time for supply.

---

The rules state that supply should be recalculated at the end of each unit's move. When you move a land unit into a hex controlled by the enemy, it now becomes controlled by your side. That means supply needs to be recalculated for all the units (and secondary supply sources: SS) on your side that were OOS before the unit moved. In addition all the units (and secondary supply sources) on the other side that were in supply need to have their supply status recalculated.

The program is quite efficient at determining if an in-supply unit/SS is still in supply. It has stored the path that was previously used by the unit/SS and checks to see it hasn't been damaged in some way. If the old path isn't good any more, then it will need to do a new search. New searches may take some time, but they rarely need to be done. Taking out a primary supply source for the enemy might cause a lot of recalculation, especially if there were several SS tracing supply to that primary. But again, that is quite rare.

The delays are mostly in trying to find supply for OOS SS when you have taken a new hex. The program doesn't know that the hex in the middle of the USSR has no bearing on the OOS status of a minor country capital in Africa. So it tries to find a path to a primary for that OOS SS. Those are rail paths. If no overland path is found, then the program tries to find an overseas path. Given a half dozen OOS SS in Africa (or in South America), the time to recalculate supply can take far too long.

One of the changes I made recently was to note when there is more than one SS on a rail network. If one of the SS is in supply, then all the others are too. The same is true if they are OOS. But things quickly get out of hand with that logic. A SS might be able to trace to a minor country capital that is a primary source for some units. For instance, a Korean unit in China which is controlled by Japan might not be able to trace a path directly to a city in Korea, but be able to trace a path to a Japanese HQ that traces to a Korean city. That search needs to be done if the Japanese HQ is OOS (unable to trace to a Japanese home city). Weird? Yeah, but that came up in a game.
Steve

Perfection is an elusive goal.
Shannon V. OKeets
Posts: 22165
Joined: Wed May 18, 2005 11:51 pm
Location: Honolulu, Hawaii
Contact:

RE: unplayable lag time

Post by Shannon V. OKeets »

And let me add that moving land units that have ZOCs around on the map means that hexes which previously were valid/invalid as part of a supply path may now be invalid/valid. That increases the number of instances where recalculation has to be performed.
Steve

Perfection is an elusive goal.
carpenkm
Posts: 25
Joined: Tue Mar 25, 2014 6:20 pm

RE: unplayable lag time

Post by carpenkm »

Hi Steve

Thanks for the response. I can certainly understand the complexity of supply having got it wrong in many and varied ways when playing the board game years ago.

I've tried to zip and upload the saved game (fingers crossed). The lag time seems a little random. In the attached it is Italy's land move. Moves in France generally ok (instant). For me the following moves took around a minute from placing to being able to continue:
Italian Celere 4-5 in hex 70,76 to hex 70,75 (one hex west)
MTN 4-4 from Karachi 2 hexes east (89,94 to 89,96)
Try moving to the German land move and Moving Manstein from 71,76 to 70,75 also similar. Many of the Russina Fromt moves are similar.

The lag also ssesm to either instant or ages (minute or more) with nothing in between. I havebeen playing this game for a while (dont get a much time as I woud llike to play) so it has gone through various upgrades over the months!

Also don't see why Italian 3-3 in 55,23 appears to be in supply whilst adjacent German units are OOS.

I would be really grateful for any help. Is it taking as long on your computer? If this is an ongoing issue, is there anyway to get the programme to behave a little more like a human and not worry too much about checking everything every move and perhaps only checking supply when it's relevant/needed. Could there then be a drop down menu for a player to request a supply check if in doubt? Just a thought - I'm not a programmer!

Regards

Keith
Attachments
slow_moves.zip
(1.5 MiB) Downloaded 9 times
Post Reply

Return to “Tech Support”