1.04 patch bug/error thread

Warplan is a World War 2 simulation engine. It is a balance of realism and playability incorporating the best from 50 years of World War 2 board wargaming.

Moderator: AlvaroSousa

Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

1.04 patch bug/error thread

Post by Journier »

just to keep a running list.
1941 scenario

1) 1941 scenario russian bomber still has fighter bomber designations. at hex;s 181/54, and at 182,52
2) RUS air superiority at 176,63 has assault designation.
3) RUS air superiority at 179,67 assault designation
4) RUS tac air group at 189,56 has interceptor designation
5) RUS soviet 8th corps (mechanized) has assault designation
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

add specialty selection doesnt select anything instead clicking through to map, making you unable to add a specialty other than anti tank to any units. only thing on screen clickable is the ADD button. no selection can be made.
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

after completing an attack with a unit, and displacing an enemy unit, you now have to deselect the attacking unit and reselect it to move the unit now. Not sure if this was wanted change? but sorta annoying
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

after resupplying a fleet with a oiler consumable, the fleet supply level drops down to 3 as a whole no matter how high it was before.
gwgardner
Posts: 7279
Joined: Fri Apr 07, 2006 1:23 pm

RE: 1.04 scenario bug/error thread

Post by gwgardner »

ORIGINAL: Journier

after completing an attack with a unit, and displacing an enemy unit, you now have to deselect the attacking unit and reselect it to move the unit now. Not sure if this was wanted change? but sorta annoying

I don't see that behavior in my game. After displacement I can select the unit I want to move without deselecting anything.

Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

ORIGINAL: gwgardner

I don't see that behavior in my game. After displacement I can select the unit I want to move without deselecting anything.

take a single unit and attack an enemy unit, displace that unit, then try to move into the hex it was occupying.

It doesnt occur with Multi attacks, nor does it disallow you to move that unit into already previously controlled land.

However, if you try to occupy the previous enemy position its a no go until you deselect and then reselect unit to move again.

I believe its something wrong with the ZOC calculation? its not taking into account it just ran the enemy unit away.

User avatar
tyronec
Posts: 5485
Joined: Fri Aug 07, 2015 5:11 am
Location: Portaferry, N. Ireland

RE: 1.04 scenario bug/error thread

Post by tyronec »

quote:

ORIGINAL: Journier

after completing an attack with a unit, and displacing an enemy unit, you now have to deselect the attacking unit and reselect it to move the unit now. Not sure if this was wanted change? but sorta annoying


I don't see that behavior in my game. After displacement I can select the unit I want to move without deselecting anything.
I get the same problem, it is new.
The lark, signing its chirping hymn,
Soars high above the clouds;
Meanwhile, the nightingale intones
With sweet, mellifluous sounds.
Enough of Stalin, Freedom for the Ukraine !
User avatar
tyronec
Posts: 5485
Joined: Fri Aug 07, 2015 5:11 am
Location: Portaferry, N. Ireland

RE: 1.04 scenario bug/error thread

Post by tyronec »

dd specialty selection doesnt select anything instead clicking through to map, making you unable to add a specialty other than anti tank to any units. only thing on screen clickable is the ADD button. no selection can be made.
I get can select any speciality can be selected but none of them are added.
The lark, signing its chirping hymn,
Soars high above the clouds;
Meanwhile, the nightingale intones
With sweet, mellifluous sounds.
Enough of Stalin, Freedom for the Ukraine !
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

ORIGINAL: tyronec
I get can select any speciality can be selected but none of them are added.

so you can actually make the selection? weird.
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

ORIGINAL: Journier
ORIGINAL: tyronec
I get can select any speciality can be selected but none of them are added.

so you can actually make the selection? weird.

Figured it out!

You now have to right click the selection to select the specialty, then hit the ADD button, and it works now, why it was changed not sure!
User avatar
Flaviusx
Posts: 7732
Joined: Wed Sep 09, 2009 3:55 pm
Location: Southern California

RE: 1.04 scenario bug/error thread

Post by Flaviusx »

So far none of these are deal killers, just annoying and can be played around, knock on wood.
WitE Alpha Tester
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

nevermind
User avatar
AlvaroSousa
Posts: 12107
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: 1.04 scenario bug/error thread

Post by AlvaroSousa »

Somethings didn't make it in the patch. But Matrix is setting up a live beta forum spot Tuesday so I can constantly update the game there. There will be a link to the corrected scenarios. I had an emergency this morning that took all of the day at Matrix and we couldn't get it up today.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

can anyone repeat for me that land units cant load on a boat and sail out of the new copenhagan port?

thanks alvaro for update
User avatar
Novaliz
Posts: 265
Joined: Sun Jul 22, 2007 1:16 pm

RE: 1.04 scenario bug/error thread

Post by Novaliz »

Did you all have the error message when you started the game after the update? Did something go wrong during update? Should I be concerned and reinstall the game? When I started the game again the error message was gone.
Journier
Posts: 350
Joined: Sun Mar 28, 2010 3:41 pm

RE: 1.04 scenario bug/error thread

Post by Journier »

yea we all got the error, nothing wrong.
User avatar
AlvaroSousa
Posts: 12107
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: 1.04 scenario bug/error thread

Post by AlvaroSousa »

I see what is going on there. I gotta fix that. I will have the new scenario download int he morning. I moved copen so it can't be blocked by the Allies and forgot to give it access to a non-neutral sea location.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
Novaliz
Posts: 265
Joined: Sun Jul 22, 2007 1:16 pm

RE: 1.04 scenario bug/error thread

Post by Novaliz »

The mini map doesnt scale. Regardless of the scale settings, it stays very small in the right corner.
User avatar
AlvaroSousa
Posts: 12107
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: 1.04 scenario bug/error thread

Post by AlvaroSousa »

ORIGINAL: Journier

after resupplying a fleet with a oiler consumable, the fleet supply level drops down to 3 as a whole no matter how high it was before.

He is right on this one. He just wasn't specific. The subs drop. I'll add this to the fix list.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
AlvaroSousa
Posts: 12107
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: 1.04 scenario bug/error thread

Post by AlvaroSousa »

ORIGINAL: Novaliz

The mini map doesnt scale. Regardless of the scale settings, it stays very small in the right corner.

Got it.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
Post Reply

Return to “WarPlan”