Tacview 3D shapes thread - Share your custom shapes here

Post new mods and scenarios here.

Moderator: MOD_Command

Dimitris
Posts: 15201
Joined: Sun Jul 31, 2005 10:29 am
Contact:

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by Dimitris »

ORIGINAL: Lucas.F
Hello everyone.i am new in the forum.

Finalizing a couple of Brazilian 3D models for use in CMANO.
Is there a way to add the *range* radius for AAA ingame?

Embraer R99A
Embraer R99B
SABER M60 Radar
FlakPanzer GEPARD
Oerlikon with the Skyguard

Hello and welcome,

We do not recommend using Tacview's "range bubbles" when using with Command, because the range figures are auto-estimated from Tacview rather than actually provided by Command.
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

Hi,

One of my last models there. I focused on commercial vessels & tankers to provide more traffic variation.

Watercraft.CCL135Kt / Cruise Line ship
Image

Watercraft.CFB23&35 / fishing boat
Image

Other.Fishschool
Image

Feel free to add to meshes repertory

More will follow

B.
Attachments
Watercraft..ercial1.zip
(1.06 MiB) Downloaded 106 times
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

Next commercial units:

Watercraft.CCV-AllFeeder for:
-Commercial Container Vessel - Small Feeder [750 TEU, 9,500t DWT]
-Commercial Container Vessel - Small Feeder [100 TEU, 5,750t DWT]
-Commercial Container Vessel - Feeder [1,600 TEU, 20,000t DWT]
-Commercial Container Vessel - Feedermax [3,000 TEU, 30,000t DWT]
-Commercial Container Vessel - Panamax [4,500 TEU, 65,000t DWT]
Image



Watercraft.CCV-UL.obj for:
-Commercial Container Vessel - Post Panamax [9,500 TEU, 105,000t DWT]
-Commercial Container Vessel - New Panamax [13,500 TEU, 155,000t DWT]
-Commercial Container Vessel - Ultra Large [15,000 TEU, 160,000t DWT]
Image


Watercraft.CDBC_S-H&SupraSize for:
-Commercial Dry-Bulk Carrier - Handymax Size [45,000t DWT]
-Commercial Dry-Bulk Carrier - Handysize [35,000t DWT]
-Commercial Dry-Bulk Carrier - Panamax Size [75,000t DWT]
-Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT, Helo Deck]
-Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT]
-Commercial Dry-Bulk Carrier - Supramax Size [55,000t DWT]
Image


Watercraft.CDBC_VL&CapSize.obj for:
-Commercial Dry-Bulk Carrier - Capesize Size [150,000t DWT]
-Commercial Dry-Bulk Carrier - Very Large Size [200,000t DWT]
Image


Watercraft.CT.obj for:
-Commercial Tanker - General Purpose [20,000t DWT]
-Commercial Tanker - Medium Range [40,000t DWT]
-Commercial Tanker - Large Range 1 [75,000t DWT]
-Commercial Tanker - Large Range 2 [150,000t DWT]
Image


Watercraft.CT-ULCC-VLCC.obj for:
-Commercial Tanker - Very Large Crude Carrier [300,000t DWT]
-Commercial Tanker - Ultra Large Crude Carrier [420,000t DWT]
Image


Watercraft.CT-LNG_LPG.obj for:
Commercial LNG/LPG Tanker [18,000t DWT]
Image


Thanks

B.
Dimitris
Posts: 15201
Joined: Sun Jul 31, 2005 10:29 am
Contact:

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by Dimitris »

Very nice, thanks!
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

And Some military here:

Watercraft.Astute.obj (update)
Watercraft.Suffren.obj (update)
Watercraft.Project885M.obj (update)
Watercraft.Trafalgar.obj (update)

Watercraft.Lafayette.obj (new)
Image


Watercraft.R91.obj (new)
Image


Watercraft.FREMM.obj (new)
Image


Watercraft.VanguardSSBN.obj (new)
Image



cheers

B.
Attachments
Watercraft.military.zip
(2.16 MiB) Downloaded 120 times
Dimitris
Posts: 15201
Joined: Sun Jul 31, 2005 10:29 am
Contact:

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by Dimitris »

ORIGINAL: BLiboy

Next commercial units:

Watercraft.CCV-AllFeeder for:
-Commercial Container Vessel - Small Feeder [750 TEU, 9,500t DWT]
-Commercial Container Vessel - Small Feeder [100 TEU, 5,750t DWT]
-Commercial Container Vessel - Feeder [1,600 TEU, 20,000t DWT]
-Commercial Container Vessel - Feedermax [3,000 TEU, 30,000t DWT]
-Commercial Container Vessel - Panamax [4,500 TEU, 65,000t DWT]
Image



Watercraft.CCV-UL.obj for:
-Commercial Container Vessel - Post Panamax [9,500 TEU, 105,000t DWT]
-Commercial Container Vessel - New Panamax [13,500 TEU, 155,000t DWT]
-Commercial Container Vessel - Ultra Large [15,000 TEU, 160,000t DWT]
Image


Watercraft.CDBC_S-H&SupraSize for:
-Commercial Dry-Bulk Carrier - Handymax Size [45,000t DWT]
-Commercial Dry-Bulk Carrier - Handysize [35,000t DWT]
-Commercial Dry-Bulk Carrier - Panamax Size [75,000t DWT]
-Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT, Helo Deck]
-Commercial Dry-Bulk Carrier - Small Handysize [25,000t DWT]
-Commercial Dry-Bulk Carrier - Supramax Size [55,000t DWT]
Image


Watercraft.CDBC_VL&CapSize.obj for:
-Commercial Dry-Bulk Carrier - Capesize Size [150,000t DWT]
-Commercial Dry-Bulk Carrier - Very Large Size [200,000t DWT]
Image


Watercraft.CT.obj for:
-Commercial Tanker - General Purpose [20,000t DWT]
-Commercial Tanker - Medium Range [40,000t DWT]
-Commercial Tanker - Large Range 1 [75,000t DWT]
-Commercial Tanker - Large Range 2 [150,000t DWT]
Image


Watercraft.CT-ULCC-VLCC.obj for:
-Commercial Tanker - Very Large Crude Carrier [300,000t DWT]
-Commercial Tanker - Ultra Large Crude Carrier [420,000t DWT]
Image


Watercraft.CT-LNG_LPG.obj for:
Commercial LNG/LPG Tanker [18,000t DWT]
Image


Thanks

B.

Did you forget to attach the file for those, by any chance?
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

Maybe...[8|]
Attachments
Watercraft..mercial2.zip
(3.4 MiB) Downloaded 102 times
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

Hi,

Some civilians and Horizon class frigate + SAM (the default scale of the units was too big) & Mirage F1 upgrade.

AntiAircraft.SAM.SA-17
AntiAircraft.SAM.SA-6
AntiAircraft.SAM.SA-2

FixedWing.Mirage F1

Image



Watercraft.CMY13 for Civilian Motor Yacht [13m] long
Watercraft.CMY38 for Civilian Motor Yacht [38m] long
Image
Image



Watercraft.Jetski
Watercraft.CSB7 for Civilian Small boat [7m]
Watercraft.Speedboat for Civilian Go Fast [13m]
Image



Watercraft.Horizon For french Forbin & Italian Andrea Doria units
Image


B.
Attachments
Pack.zip
(1.19 MiB) Downloaded 105 times
Dimitris
Posts: 15201
Joined: Sun Jul 31, 2005 10:29 am
Contact:

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by Dimitris »

Thanks again!
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

Hi Dimitris,

Is there's a way to get the last clean Associations_DB3000.xls file ?
Mine is a little bit messy because of back & forth work on shapes.

Thanks !
Dimitris
Posts: 15201
Joined: Sun Jul 31, 2005 10:29 am
Contact:

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by Dimitris »

Certainly, see attached.

Attachments
Tacview.zip
(1.06 MiB) Downloaded 65 times
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

If just realized i could have sent the xls. format updated with each pack. It would have helped...

Some more units there:


NEW AIR:

Airbus A300 beluga
Airbus A340
Airbus A380
Antonov-12
ATR42
Boeing747
Boeing767
Boeing787
C5 Galaxy
Cessna337
Concorde
Embraer190
F-16F/I/V
Hawk
JH-7
Kawasaki P-1
RC135
Super-Etendard
TU-204
U-2

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


UPDATED AIR:
J-20
JAS39 (wrong scale)
Rafale

Image

Image

Image


NEW NAVAL:
Type054 Jiangkai I
Type054A Jiangkai II
Type055 Renhai

Image

Image

Image

Cheers

B.
BLiboy
Posts: 26
Joined: Mon Aug 14, 2017 12:16 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by BLiboy »

With the files maybe ?

[>:]
Attachments
Units.zip
(6.43 MiB) Downloaded 121 times
boogabooga
Posts: 969
Joined: Wed Jul 18, 2018 12:05 am

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by boogabooga »

Wil these make it into the beta releases? I am not sure where these go in Associations_DB3000.xls.
The boogabooga doctrine for CMO: Any intentional human intervention needs to be able to completely and reliably over-ride anything that the AI is doing at any time.
Dimitris
Posts: 15201
Joined: Sun Jul 31, 2005 10:29 am
Contact:

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by Dimitris »

ORIGINAL: BLiboy

With the files maybe ?

[>:]

Thanks again!
Dimitris
Posts: 15201
Joined: Sun Jul 31, 2005 10:29 am
Contact:

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by Dimitris »

ORIGINAL: boogabooga

Wil these make it into the beta releases? I am not sure where these go in Associations_DB3000.xls.

Yes, they will be included in one of the forthcoming updates together with appropriate association files.
boogabooga
Posts: 969
Joined: Wed Jul 18, 2018 12:05 am

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by boogabooga »

The CWDB association file is missing some models that are available and being used by DB3K. Examples include the F-105 and the Saab Draken. Also, the airbase model used by DB3k seems more appropriate than the pylon model that is used by the CWDB.

I could post my edited CWDB association file if there is interest.
The boogabooga doctrine for CMO: Any intentional human intervention needs to be able to completely and reliably over-ride anything that the AI is doing at any time.
User avatar
CV60
Posts: 1036
Joined: Sun Sep 30, 2012 11:40 pm

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by CV60 »

ORIGINAL: boogabooga

The CWDB association file is missing some models that are available and being used by DB3K. Examples include the F-105 and the Saab Draken. Also, the airbase model used by DB3k seems more appropriate than the pylon model that is used by the CWDB.

I could post my edited CWDB association file if there is interest.

I would be interested, but probably you should coordinate with Dimitris. If I understand it correctly, the 3D models get updated occasionally via game updates. If that is correct, then your hard work may end up being over written by a game update.
“Do I not destroy my enemies when I make them my friends?” -Abraham Lincoln
User avatar
dadizonline
Posts: 45
Joined: Thu Jul 30, 2020 11:39 am

RE: Tacview 3D shapes thread - Share your custom shapes here

Post by dadizonline »

Are they working on indian helicopters?
History is written by victor.
Post Reply

Return to “Mods and Scenarios”