Strategic Command WWII: World at War - v1.11.00
Moderator: Hubert Cater
- EarlyDoors
- Posts: 758
- Joined: Sun Dec 16, 2018 10:28 am
- Location: uk
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
Is there any change to stop a 1 turn Poland conquest?
I'm not advocating it, just curious as my opponent has taken Warsaw turn 1 and Poland has not surrendered.
Furthermore, they are showing as 96% national morale !?!
I'm not advocating it, just curious as my opponent has taken Warsaw turn 1 and Poland has not surrendered.
Furthermore, they are showing as 96% national morale !?!
- BillRunacre
- Posts: 6828
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
This suggests that some scripts haven't fired, are you playing an official campaign or a mod?
While Poland may not surrender immediately on the fall of Warsaw, her NM should be a lot less.
While Poland may not surrender immediately on the fall of Warsaw, her NM should be a lot less.
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/
- EarlyDoors
- Posts: 758
- Joined: Sun Dec 16, 2018 10:28 am
- Location: uk
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
official campaign ChallengeID 312000
RE: Strategic Command WWII: World at War - v1.11.00
Hi Hubert, thanks for your reply. Unselecting "estimated losses highlights" leaves it like I had it before the patch, estimated losses only when I hover over an enemy unit. I hadn't notice/tweaked this last one.ORIGINAL: Hubert Cater
Hi rjh1971,
There are two options in the ADVANCED screen, one is the 'Enemy target highlights', this highlights the targets with a red hex, and the second option is 'Enemy Losses Highlights', and this one displays the predicted combat results.
Perhaps this second option is still enabled on your end?
Hubert
So now everything is clear

GG's AWD, GG's WBTS, GG's WitE Beta Tester
Beta Tester: Panzer Corps, Time of Fury, CtGW, DC CB, DC3 Barbarossa, SC WWII WiE, SC WWII WaW, SC WWI
- EarlyDoors
- Posts: 758
- Joined: Sun Dec 16, 2018 10:28 am
- Location: uk
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
ORIGINAL: BillRunacre
This suggests that some scripts haven't fired, are you playing an official campaign or a mod?
While Poland may not surrender immediately on the fall of Warsaw, her NM should be a lot less.
They surrendered on turn 3 - axis second turn - maybe nothing's changed, just seemed a bit weird
- EarlyDoors
- Posts: 758
- Joined: Sun Dec 16, 2018 10:28 am
- Location: uk
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
When you log in after your opponent has resigned, the replay shown is of your own move, which is...err, different
- ElvisJJonesRambo
- Posts: 2510
- Joined: Wed Feb 06, 2019 6:48 pm
- Location: Kingdom of God
RE: Strategic Command WWII: World at War - v1.11.00
ORIGINAL: EarlyDoors
When you log in after your opponent has resigned, the replay shown is of your own move, which is...err, different
Think it depends on when the resignation occurs.
Replay shows "last completed" turn.
In our game, I called it quits before any action.
You took me to the 1944 Door.
Slaps issued: 16 - Patton, Dana White, Batman, Samson. Medals/Salutes given: 6, warnings received: 11, suspensions served: 4, riots: 2.
- BillRunacre
- Posts: 6828
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
ORIGINAL: EarlyDoors
ORIGINAL: BillRunacre
This suggests that some scripts haven't fired, are you playing an official campaign or a mod?
While Poland may not surrender immediately on the fall of Warsaw, her NM should be a lot less.
They surrendered on turn 3 - axis second turn - maybe nothing's changed, just seemed a bit weird
Thanks, I've got to the bottom of it, it turns out that there are two National Morale scripts in our WWII: War in Europe game that aren't included in this game. I think it must have been an oversight so have made a note to include them in a future update.
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/
RE: Strategic Command WWII: World at War - v1.11.00
Hello
I don't find de645 into "UNIT" script?
Is it an oversight ?
SORRRRRRY, I found it[&o]
I don't find de645 into "UNIT" script?
Is it an oversight ?
SORRRRRRY, I found it[&o]
RE: Strategic Command WWII: World at War - v1.11.00
Explain, where now it is necessary to keep the garrisons in Manchuria, that the USSR did not raise the mobilization?
Previously, there were partisans, and even earlier, the hexes were highlighted, now neither the partisans nor the marked hexes, it is not clear where the key points are now...
Previously, there were partisans, and even earlier, the hexes were highlighted, now neither the partisans nor the marked hexes, it is not clear where the key points are now...
- Hubert Cater
- Posts: 6063
- Joined: Mon Jul 22, 2013 11:42 am
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
ORIGINAL: IIo4Tu
Explain, where now it is necessary to keep the garrisons in Manchuria, that the USSR did not raise the mobilization?
Previously, there were partisans, and even earlier, the hexes were highlighted, now neither the partisans nor the marked hexes, it is not clear where the key points are now...
Hi IIo4Tu,
Do you have the following enabled on your end?

Once enabled you should then see the marked positions in Manchuria as well as the extra info when you mouse hover over the positions.
Using the P key will also show the Partisan locations as well.
Hope this helps,
Hubert
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
RE: Strategic Command WWII: World at War - v1.11.00
ORIGINAL: Hubert Cater
ORIGINAL: IIo4Tu
Explain, where now it is necessary to keep the garrisons in Manchuria, that the USSR did not raise the mobilization?
Previously, there were partisans, and even earlier, the hexes were highlighted, now neither the partisans nor the marked hexes, it is not clear where the key points are now...
Hi IIo4Tu,
Do you have the following enabled on your end?
Once enabled you should then see the marked positions in Manchuria as well as the extra info when you mouse hover over the positions.
Using the P key will also show the Partisan locations as well.
Hope this helps,
Hubert
thank you, it really helped, but the indicator is still missing near Warsaw
- Hubert Cater
- Posts: 6063
- Joined: Mon Jul 22, 2013 11:42 am
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
This could be as expected depending upon the in game date of your current turn, e.g. the Warsaw indicator will not display until the end of February 1940.
Is this possibly the case on your end?
Is this possibly the case on your end?
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
- BillRunacre
- Posts: 6828
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
You may need to press the blue button at the top right of the information panels so that in game information shows up.
When your mouse is hovering over it, it way say Hide/Show Map Info. Hopefully pressing that will get them to show?
Alternatively, the locations are listed on the second page of the 1939 Strategy Guides, and these can be accessed via the Launcher or in game from one of the buttons at the top right.
When your mouse is hovering over it, it way say Hide/Show Map Info. Hopefully pressing that will get them to show?
Alternatively, the locations are listed on the second page of the 1939 Strategy Guides, and these can be accessed via the Launcher or in game from one of the buttons at the top right.
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/
RE: Strategic Command WWII: World at War - v1.11.00
yes, indeed, the display appeared in March, thank you!
- EarlyDoors
- Posts: 758
- Joined: Sun Dec 16, 2018 10:28 am
- Location: uk
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
It looks like French Somaliland does not capitulate on the Fall of France and the creation of Vichy
I don't recall that being a % chance
maybe a script is missing there?
I don't recall that being a % chance
maybe a script is missing there?
RE: Strategic Command WWII: World at War - v1.11.00
ORIGINAL: EarlyDoors
It looks like French Somaliland does not capitulate on the Fall of France and the creation of Vichy
I don't recall that being a % chance
maybe a script is missing there?
I believe this was changed in the previous patch, that if you keep an Allied unit in Somaliland capital when France surrenders, it will stay mobilized with the allies. However, as soon as you move your allied unit out, it will go neutral and out of the war.
- BillRunacre
- Posts: 6828
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command WWII: World at War - v1.11.00
ORIGINAL: Cpuncher
ORIGINAL: EarlyDoors
It looks like French Somaliland does not capitulate on the Fall of France and the creation of Vichy
I don't recall that being a % chance
maybe a script is missing there?
I believe this was changed in the previous patch, that if you keep an Allied unit in Somaliland capital when France surrenders, it will stay mobilized with the allies. However, as soon as you move your allied unit out, it will go neutral and out of the war.
That is right, because some people were losing non-French Allied units when they shouldn't have been. I can't remember the exact details now, but this is the least worst solution.
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/



