1942: Endsieg (1.10 Update)
Moderator: Joel Billings
RE: 1942: Endsieg
1.08 has been posted.
The game now begins with a Soviet attack on the formations near Stalingrad.
Units arrive in the Balkans because when they were moved to the Axis Reserve via the CSV it resulted in a chronic shortage of trucks. The Axis reserve box was WAD, but the result was that the game had a big shortage.
The game now begins with a Soviet attack on the formations near Stalingrad.
Units arrive in the Balkans because when they were moved to the Axis Reserve via the CSV it resulted in a chronic shortage of trucks. The Axis reserve box was WAD, but the result was that the game had a big shortage.
- IslandInland
- Posts: 1189
- Joined: Mon Dec 08, 2014 3:54 pm
- Location: YORKSHIRE
- Contact:
RE: 1942: Endsieg
How did you increase Lend-Lease for the Soviets.
Whenever I try to change anything in the Lend-Lease locations 2775, 2776 and 2777 (Lend-Lease Pacific, North and South) the data in those locations just reverts back to the default numbers when I reload the scenario. I tried setting the FID to 0000. That didn't work nor did just changing the factories to something the Soviets actually produced internally such as T-34s.
Did you increase Maximum Imports for each item of Lend-Lease?

Whenever I try to change anything in the Lend-Lease locations 2775, 2776 and 2777 (Lend-Lease Pacific, North and South) the data in those locations just reverts back to the default numbers when I reload the scenario. I tried setting the FID to 0000. That didn't work nor did just changing the factories to something the Soviets actually produced internally such as T-34s.
Did you increase Maximum Imports for each item of Lend-Lease?

- Attachments
-
- MatildaII.jpg (123.03 KiB) Viewed 1081 times
Beta Tester for:
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
- IslandInland
- Posts: 1189
- Joined: Mon Dec 08, 2014 3:54 pm
- Location: YORKSHIRE
- Contact:
RE: 1942: Endsieg
[Double post]
Beta Tester for:
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
RE: 1942: Endsieg
ORIGINAL: IslandInland
How did you increase Lend-Lease for the Soviets.
Whenever I try to change anything in the Lend-Lease locations 2775, 2776 and 2777 (Lend-Lease Pacific, North and South) the data in those locations just reverts back to the default numbers when I reload the scenario. I tried setting the FID to 0000. That didn't work nor did just changing the factories to something the Soviets actually produced internally such as T-34s.
Did you increase Maximum Imports for each item of Lend-Lease?
![]()
Yes, that is what I did.
You make a good point to recheck it, I wonder if this has the desired effect.
- IslandInland
- Posts: 1189
- Joined: Mon Dec 08, 2014 3:54 pm
- Location: YORKSHIRE
- Contact:
RE: 1942: Endsieg
ORIGINAL: kahta
ORIGINAL: IslandInland
How did you increase Lend-Lease for the Soviets.
Whenever I try to change anything in the Lend-Lease locations 2775, 2776 and 2777 (Lend-Lease Pacific, North and South) the data in those locations just reverts back to the default numbers when I reload the scenario. I tried setting the FID to 0000. That didn't work nor did just changing the factories to something the Soviets actually produced internally such as T-34s.
Did you increase Maximum Imports for each item of Lend-Lease?
![]()
Yes, that is what I did.
You make a good point to recheck it, I wonder if this has the desired effect.
I tried it and that also reverts to default numbers.
You might want to check your scenario because I have a feeling the advertised increase in Soviet Lend-Lease isn't actually occurring in the scenario.
Beta Tester for:
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
RE: 1942: Endsieg
ORIGINAL: IslandInland
ORIGINAL: kahta
ORIGINAL: IslandInland
How did you increase Lend-Lease for the Soviets.
Whenever I try to change anything in the Lend-Lease locations 2775, 2776 and 2777 (Lend-Lease Pacific, North and South) the data in those locations just reverts back to the default numbers when I reload the scenario. I tried setting the FID to 0000. That didn't work nor did just changing the factories to something the Soviets actually produced internally such as T-34s.
Did you increase Maximum Imports for each item of Lend-Lease?
![]()
Yes, that is what I did.
You make a good point to recheck it, I wonder if this has the desired effect.
I tried it and that also reverts to default numbers.
You might want to check your scenario because I have a feeling the advertised increase in Soviet Lend-Lease isn't actually occurring in the scenario.
Thanks- I will check. I'd looked at a simulated run and there were significant stockpiles of LL equipment by mid '44, perhaps there was another reason for that.
RE: 1942: Endsieg
1.09 Update
Description updated to remove reference to increased lend-lease.
The Soviets start with large lend-lease equipment stockpiles and mechanized corps OOBs include lend-lease equipment.
Better opening move by
Description updated to remove reference to increased lend-lease.
The Soviets start with large lend-lease equipment stockpiles and mechanized corps OOBs include lend-lease equipment.
Better opening move by
- IslandInland
- Posts: 1189
- Joined: Mon Dec 08, 2014 3:54 pm
- Location: YORKSHIRE
- Contact:
RE: 1942: Endsieg
ORIGINAL: kahta
ORIGINAL: IslandInland
ORIGINAL: kahta
Yes, that is what I did.
You make a good point to recheck it, I wonder if this has the desired effect.
I tried it and that also reverts to default numbers.
You might want to check your scenario because I have a feeling the advertised increase in Soviet Lend-Lease isn't actually occurring in the scenario.
Thanks- I will check. I'd looked at a simulated run and there were significant stockpiles of LL equipment by mid '44, perhaps there was another reason for that.
I've been trying to remove Lend-Lease from the North and South locations but increase the Pacific location Lend-Lease quantities.
So far everything I've tried makes no difference and after saving the scenario it always reverts to the default numbers.
I'll be happy when a manual for the editor is released.
Beta Tester for:
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
RE: 1942: Endsieg
ORIGINAL: IslandInland
I've been trying to remove Lend-Lease from the North and South locations but increase the Pacific location Lend-Lease quantities.
So far everything I've tried makes no difference and after saving the scenario it always reverts to the default numbers.
I'll be happy when a manual for the editor is released.
It's generic data, and generic data cannot be saved per scenario as it is (same applies to OOB, factories and plenty of other things). You have to modify and save it over the originals. The promised editor changes will "fix" this.
- IslandInland
- Posts: 1189
- Joined: Mon Dec 08, 2014 3:54 pm
- Location: YORKSHIRE
- Contact:
RE: 1942: Endsieg
ORIGINAL: Karri
ORIGINAL: IslandInland
I've been trying to remove Lend-Lease from the North and South locations but increase the Pacific location Lend-Lease quantities.
So far everything I've tried makes no difference and after saving the scenario it always reverts to the default numbers.
I'll be happy when a manual for the editor is released.
It's generic data, and generic data cannot be saved per scenario as it is (same applies to OOB, factories and plenty of other things). You have to modify and save it over the originals. The promised editor changes will "fix" this.
That is what I suspected. I guess I will have to wait.
Beta Tester for:
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
RE: 1942: Endsieg
interesting idea and all, so, I am an old but now noob, {tester and player of many gg games including wite and witw)
so I dl the scen which I was able to c/p into the folder. Shows up but wont launch, ok, need to update game
I update game to 1.00.11 and still wont lunch and I am getting the scenario error and need to update game etc ..
I am sure I am missing something simple..
PLZ HELP
thank you
so I dl the scen which I was able to c/p into the folder. Shows up but wont launch, ok, need to update game
I update game to 1.00.11 and still wont lunch and I am getting the scenario error and need to update game etc ..
I am sure I am missing something simple..
PLZ HELP
thank you
"Tanks forward"
RE: 1942: Endsieg
ORIGINAL: freeboy
interesting idea and all, so, I am an old but now noob, {tester and player of many gg games including wite and witw)
so I dl the scen which I was able to c/p into the folder. Shows up but wont launch, ok, need to update game
I update game to 1.00.11 and still wont lunch and I am getting the scenario error and need to update game etc ..
I am sure I am missing something simple..
PLZ HELP
thank you
This may be because I am a beta tester. You might need to wait until the newest patch comes out (which should be soon).
- IslandInland
- Posts: 1189
- Joined: Mon Dec 08, 2014 3:54 pm
- Location: YORKSHIRE
- Contact:
RE: 1942: Endsieg
ORIGINAL: freeboy
interesting idea and all, so, I am an old but now noob, {tester and player of many gg games including wite and witw)
so I dl the scen which I was able to c/p into the folder. Shows up but wont launch, ok, need to update game
I update game to 1.00.11 and still wont lunch and I am getting the scenario error and need to update game etc ..
I am sure I am missing something simple..
PLZ HELP
thank you
Try installing the latest beta patch.
https://www.matrixgames.com/forums/tm.asp?m=5043667
Beta Tester for:
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
War In The East 2 & Steel Inferno Expansion
War In The West Operation Torch
Strategic Command American Civil War
Strategic Command WWII: War in the Pacific
XXXCorps
1941 Hitler's Dream Scenario for WITE 2
RE: 1942: Endsieg
well.. during turn two the ai stalls at 43% during the Form front
how long should I let it sit?
how long should I let it sit?
"Tanks forward"
RE: 1942: Endsieg
ORIGINAL: freeboy
we have joy
Excellent! Please let me know what you think!
RE: 1942: Endsieg
see above game hanging at 43% twice in a row .. thats unfortunate to get a bug right out of the gate
It look wonderful so far
It is early turn two red army turn ai,,
It look wonderful so far
It is early turn two red army turn ai,,
"Tanks forward"
-
- Posts: 4
- Joined: Tue Mar 23, 2010 8:09 am
RE: 1942: Endsieg
Hi I have followed this Mod from the initial version without issue.
I have upgraded to the New Public Beta along with the latest version of this Mod.
I have also run the first 5 turns without issue, and repeated three times.
Hopefully if you upgrade to the latest Beta that will resolve the issue
Also great work kahta
I have upgraded to the New Public Beta along with the latest version of this Mod.
I have also run the first 5 turns without issue, and repeated three times.
Hopefully if you upgrade to the latest Beta that will resolve the issue
Also great work kahta
RE: 1942: Endsieg
bugs are weitd often exposed in only certain situations.. I am having zero issues with the game non mods...
that it failed at same point and I waited several minutes on a fast machine made me think its specific to this calculation in my situation
that it failed at same point and I waited several minutes on a fast machine made me think its specific to this calculation in my situation
"Tanks forward"
RE: 1942: Endsieg
ORIGINAL: hammeredalways
Also great work kahta
Thank you!