Strategic Command: World at War - New Patch (1.12.01)
Moderator: Hubert Cater
Strategic Command: World at War - New Patch (1.12.01)
A new patch (v 1.12.01) for Strategic Command: World at War has been released, and can be downloaded from HERE.
GAME ENGINE CHANGES
- Fixed a naval retreat error that did not always optimize retreats to nearby friendly ports (havoc1371, kirk23).
- Fixed a rare Carrier retreat from combat error that would sometimes lead to a CTD (arcturusrising).
- Fixed a Strategic Bomber attack error that in some cases did not allow you to scroll after the first strike (Mithrilotter).
- Fixed an AI Rocket attack error that would incorrectly cause defensive artillery fire to fire first at the attacking Rocket unit (Mithilotter).
All Campaigns
- DECISION 305 for US MPP transfer of funds via the Hump, corrected in the event scripts from 60 to 30 MPPs, e.g. the amounts transferred and deducted now correctly match the description text for the event (Elessar2).
1939 and 1942 Campaigns
- Fixed an error in the localization of the DECISION events that had some English language decisions incorrectly displaying in German (Hydra, Elessar2).
GAME ENGINE CHANGES
- Fixed a naval retreat error that did not always optimize retreats to nearby friendly ports (havoc1371, kirk23).
- Fixed a rare Carrier retreat from combat error that would sometimes lead to a CTD (arcturusrising).
- Fixed a Strategic Bomber attack error that in some cases did not allow you to scroll after the first strike (Mithrilotter).
- Fixed an AI Rocket attack error that would incorrectly cause defensive artillery fire to fire first at the attacking Rocket unit (Mithilotter).
All Campaigns
- DECISION 305 for US MPP transfer of funds via the Hump, corrected in the event scripts from 60 to 30 MPPs, e.g. the amounts transferred and deducted now correctly match the description text for the event (Elessar2).
1939 and 1942 Campaigns
- Fixed an error in the localization of the DECISION events that had some English language decisions incorrectly displaying in German (Hydra, Elessar2).
-
HarrySmith
- Posts: 238
- Joined: Tue Aug 06, 2019 7:31 pm
- Location: Australia
RE: Strategic Command: World at War - New Patch (1.12.01)
Hi guys,
As mentioned now a number of times and i was hoping you would of fixed the issue. Strategic Bombers in WAW should only be able to be researched 1 chit at a time like all other aircraft. By not doing so enables players to create Level 5 strategic bombers with only level 3 fighters against them. Totally unrealistic. PLEASE RECTIFY. I dont understand why others do not see this as an issue.
Regards Harry
As mentioned now a number of times and i was hoping you would of fixed the issue. Strategic Bombers in WAW should only be able to be researched 1 chit at a time like all other aircraft. By not doing so enables players to create Level 5 strategic bombers with only level 3 fighters against them. Totally unrealistic. PLEASE RECTIFY. I dont understand why others do not see this as an issue.
Regards Harry
- Hubert Cater
- Posts: 6058
- Joined: Mon Jul 22, 2013 11:42 am
- Contact:
RE: Strategic Command: World at War - New Patch (1.12.01)
Hi Harry, thanks, we are still reviewing/considering on this one.
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
RE: Strategic Command: World at War - New Patch (1.12.01)
ORIGINAL: HarrySmith
Strategic Bombers in WAW should only be able to be researched 1 chit at a time
I agree with this. Large strategic bombers were a gigantic projects that took years to r+d. Setting this to 1 chit max creates an interesting dilemma. Keeping it at 2 chits just means you can focus on other techs early and catch up on stratbombers later.
I would also reduce ASW tech to 1 chit maximum. Historically the good ASW tech stuff took years, not months, to develop.
-
WilliSaenger
- Posts: 50
- Joined: Wed May 11, 2016 1:09 pm
RE: Strategic Command: World at War - New Patch (1.12.01)
Hello I noticed that in the reports section there is no distinction between Uk units and Chinese/Indian units, they are all Uk units. The same goes for the German and Japanese units, they all are German units.
![Image]()


- Attachments
-
- Reports.jpg (163.78 KiB) Viewed 850 times
-
WilliSaenger
- Posts: 50
- Joined: Wed May 11, 2016 1:09 pm
RE: Strategic Command: World at War - New Patch (1.12.01)
I also noticed that at the beginning of the war in Abyssinia the map indicator shows "Axis (occupied)" even though the Italians have not joined the Axis and the war mobilization is at 69%. As I understand it should show "Axis (69%)" and give no info about the supply state when clicking the show supply button.
- OldCrowBalthazor
- Posts: 2842
- Joined: Thu Jul 02, 2020 12:42 am
- Location: Republic of Cascadia
RE: Strategic Command: World at War - New Patch (1.12.01)
Supply will only show when the Major your controlling is at 100% Belligerency. Yeah..it would be nice if for example you could fathom out supply with the USSR when its still neutral..or your case too. Well..you can always surmise it as it stands right now by knowing the supply rules..but it would be much easier seeing it at a glance. [:)]ORIGINAL: WilliSaenger
I also noticed that at the beginning of the war in Abyssinia the map indicator shows "Axis (occupied)" even though the Italians have not joined the Axis and the war mobilization is at 69%. As I understand it should show "Axis (69%)" and give no info about the supply state when clicking the show supply button.
My YouTube Channel: Balthazor's Strategic Arcana
https://www.youtube.com/c/BalthazorsStrategicArcana
SC-War in the Pacific Beta Tester
SC-ACW Beta Tester
1904 Imperial Sunrise Tester
SC-WW1 Empires in Turmoil DLC Tester
Tester of various SC Mods
https://www.youtube.com/c/BalthazorsStrategicArcana
SC-War in the Pacific Beta Tester
SC-ACW Beta Tester
1904 Imperial Sunrise Tester
SC-WW1 Empires in Turmoil DLC Tester
Tester of various SC Mods
- BillRunacre
- Posts: 6808
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command: World at War - New Patch (1.12.01)
ORIGINAL: WilliSaenger
I also noticed that at the beginning of the war in Abyssinia the map indicator shows "Axis (occupied)" even though the Italians have not joined the Axis and the war mobilization is at 69%. As I understand it should show "Axis (69%)" and give no info about the supply state when clicking the show supply button.
Hi
The status of "Axis (occupied)" is a way to have Abyssinia start the game as a conquered nation, which makes it rather different to most Minors that start the game as neutrals.
I hope that explains it?
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/
-
WilliSaenger
- Posts: 50
- Joined: Wed May 11, 2016 1:09 pm
RE: Strategic Command: World at War - New Patch (1.12.01)
Hello,
ok, it makes sense. I have not tried it, but I believe that theoretically by beeing "Axis occupied" I may land with German units there even though Italy has not joined the axis yet.
Can you please say something about the Reports? Isn't it odd that if you want to check how many japanese units you have they show up as German? Or if you want to see how many Chinese units are left the show up as UK units?
Thank you!
ok, it makes sense. I have not tried it, but I believe that theoretically by beeing "Axis occupied" I may land with German units there even though Italy has not joined the axis yet.
Can you please say something about the Reports? Isn't it odd that if you want to check how many japanese units you have they show up as German? Or if you want to see how many Chinese units are left the show up as UK units?
Thank you!
- Hubert Cater
- Posts: 6058
- Joined: Mon Jul 22, 2013 11:42 am
- Contact:
RE: Strategic Command: World at War - New Patch (1.12.01)
ORIGINAL: WilliSaenger
Hello I noticed that in the reports section there is no distinction between Uk units and Chinese/Indian units, they are all Uk units. The same goes for the German and Japanese units, they all are German units.
![]()
Looks like you might be running a mod and if so, you will have to check the 3D unit base counter graphics as the chart and pie graphics/colours are tied into that.
For example, it is very likely the case that Germany and Japan are using the same base counters, e.g. that little disc under the 3D units, both grey, and that is why it is showing like that in the game. Same for UK and China. If you change these in the mod, then it should resolve the issue.
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
We're also on Facebook! https://www.facebook.com/FurySoftware/
Join our Steam Community:
http://steamcommunity.com/groups/strategiccommand3
-
WilliSaenger
- Posts: 50
- Joined: Wed May 11, 2016 1:09 pm
RE: Strategic Command: World at War - New Patch (1.12.01)
Yes, I'm running a mod. Will take a look into it, thank you!
RE: Strategic Command: World at War - New Patch (1.12.01)
Hi Hubert/Bill
I think I might have spotted a bug in the latest patch.
The Allies have been raiding the Norway convoy's every turn, but Norway is still only 25% pro Axis in 42.
I would have thought they would have joined the Axis by now.
Also I haven't noticed the "Norway complains about attacks on its merchant ships" pop up that used to appear.
Regards
Mike
I think I might have spotted a bug in the latest patch.
The Allies have been raiding the Norway convoy's every turn, but Norway is still only 25% pro Axis in 42.
I would have thought they would have joined the Axis by now.
Also I haven't noticed the "Norway complains about attacks on its merchant ships" pop up that used to appear.
Regards
Mike
- BillRunacre
- Posts: 6808
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command: World at War - New Patch (1.12.01)
Hi Mike
I've checked and the message about Norway complaining will only appear the once, but in every turn when the conditions apply, the relevant script will move Norway 1-4% towards the Axis.
Can you check via the Options -> Advanced -> Scripts that both Mobilization_2 scripts entitled #NAME= AXIS AI: Allied Naval Presence Near Norwegian Convoy Lines (Norway->Axis) are switched on?
They'll be right near the end of the list, almost certainly on the last page.
The important one here is the second one, as that moves Norway, the first just provides the initial message that Norway Complains At Allied Attacks On Its Merchantmen.
Thanks
Bill
I've checked and the message about Norway complaining will only appear the once, but in every turn when the conditions apply, the relevant script will move Norway 1-4% towards the Axis.
Can you check via the Options -> Advanced -> Scripts that both Mobilization_2 scripts entitled #NAME= AXIS AI: Allied Naval Presence Near Norwegian Convoy Lines (Norway->Axis) are switched on?
They'll be right near the end of the list, almost certainly on the last page.
The important one here is the second one, as that moves Norway, the first just provides the initial message that Norway Complains At Allied Attacks On Its Merchantmen.
Thanks
Bill
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/
-
SittingDuck
- Posts: 1195
- Joined: Sat Aug 31, 2002 9:08 pm
RE: Strategic Command: World at War - New Patch (1.12.01)
Bill, speaking of, is there a way to script in the Fleet file about how to keep the Axis out of the zone prescribed by the US (off Nova Scotia - can't recall the name)? I see subs go there and hang out for several turns. Maybe that is by design?
About the original post event - isn't that a Brit event where the player is given the option to mine the Norwegian harbors (Operation Wilfred)?
About the original post event - isn't that a Brit event where the player is given the option to mine the Norwegian harbors (Operation Wilfred)?
- BillRunacre
- Posts: 6808
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command: World at War - New Patch (1.12.01)
ORIGINAL: SittingDuck
Bill, speaking of, is there a way to script in the Fleet file about how to keep the Axis out of the zone prescribed by the US (off Nova Scotia - can't recall the name)? I see subs go there and hang out for several turns. Maybe that is by design?
Do you mean that the Axis AI is triggering US mobilization this way?
If so I've made a note to consider if we can limit it.
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/
RE: Strategic Command: World at War - New Patch (1.12.01)
Hi Bill
I have checked the scripts as you suggested.
On Page 2 there are 2 "Norway sends supplies to Germany" and another 1 on page 3.
All of them appear to be switched on (Have a X in the box)
Hope this helps
Mike
I have checked the scripts as you suggested.
On Page 2 there are 2 "Norway sends supplies to Germany" and another 1 on page 3.
All of them appear to be switched on (Have a X in the box)
Hope this helps
Mike
- BillRunacre
- Posts: 6808
- Joined: Mon Jul 22, 2013 2:57 pm
- Contact:
RE: Strategic Command: World at War - New Patch (1.12.01)
Hi Mike
I've run a test and have got Norway up to 30% in two turns, so the only thing I can think is maybe some hexes aren't covered by the script.
Can you send me a saved turn to bill.runacre@furysoftware.com so I can take a look?
Thanks
I've run a test and have got Norway up to 30% in two turns, so the only thing I can think is maybe some hexes aren't covered by the script.
Can you send me a saved turn to bill.runacre@furysoftware.com so I can take a look?
Thanks
Follow us on Twitter: https://twitter.com/FurySoftware
We're also on Facebook! https://www.facebook.com/FurySoftware/
We're also on Facebook! https://www.facebook.com/FurySoftware/
-
HamburgerMeat
- Posts: 385
- Joined: Sat Jul 22, 2017 6:11 pm
RE: Strategic Command: World at War - New Patch (1.12.01)
EDIT double post
-
HamburgerMeat
- Posts: 385
- Joined: Sat Jul 22, 2017 6:11 pm
RE: Strategic Command: World at War - New Patch (1.12.01)
ORIGINAL: HarrySmith
Strategic Bombers in WAW should only be able to be researched 1 chit at a time like all other aircraft.
If this is done, I would increase the hard cap of # of strategic bombers available to GB+USA by 1-2 to help compensate. IMO strategic bombers are the most powerful tool in the Allied arsenal, so nerfing them will have big repercussions on win rates.
- OldCrowBalthazor
- Posts: 2842
- Joined: Thu Jul 02, 2020 12:42 am
- Location: Republic of Cascadia
RE: Strategic Command: World at War - New Patch (1.12.01)
That sounds like a fair compromise if the nerfing is done..but this is a major change if the Allies are restricted to 1 chit.ORIGINAL: HamburgerMeat
ORIGINAL: HarrySmith
Strategic Bombers in WAW should only be able to be researched 1 chit at a time like all other aircraft.
If this is done, I would increase the hard cap of # of strategic bombers available to GB+USA by 1-2 to help compensate. IMO strategic bombers are the most powerful tool in the Allied arsenal, so nerfing them will have big repercussions on win rates.
My YouTube Channel: Balthazor's Strategic Arcana
https://www.youtube.com/c/BalthazorsStrategicArcana
SC-War in the Pacific Beta Tester
SC-ACW Beta Tester
1904 Imperial Sunrise Tester
SC-WW1 Empires in Turmoil DLC Tester
Tester of various SC Mods
https://www.youtube.com/c/BalthazorsStrategicArcana
SC-War in the Pacific Beta Tester
SC-ACW Beta Tester
1904 Imperial Sunrise Tester
SC-WW1 Empires in Turmoil DLC Tester
Tester of various SC Mods

