Newbie Questions
Moderator: Jason Petho
Newbie Questions
Dear Folk,
Just bought and installed Campaign Series. After initial looking at manual and game, I have some questions.
1. Am I correct, there is no way to turn on/off map labels - they either have them or not?
2. Am I correct, there is no way to view hex characteristics - height, terrain types, road, etc?
3. Are there no hex elevations? If there are, how do you view them?
4. Any way to change toolbar position from bottom to top or side?
5. Any way to zoom in or enlarge 2D maps? I can hardly see the hexes and units. I'm using 1920x1280.
6. How do you assess whether a unit is supplied or not?
That's a good start!
Thanks,
Mike
Just bought and installed Campaign Series. After initial looking at manual and game, I have some questions.
1. Am I correct, there is no way to turn on/off map labels - they either have them or not?
2. Am I correct, there is no way to view hex characteristics - height, terrain types, road, etc?
3. Are there no hex elevations? If there are, how do you view them?
4. Any way to change toolbar position from bottom to top or side?
5. Any way to zoom in or enlarge 2D maps? I can hardly see the hexes and units. I'm using 1920x1280.
6. How do you assess whether a unit is supplied or not?
That's a good start!
Thanks,
Mike
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
I'll answer these for you when I get home from work.
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
Thank you for your interest!
Here are some answers:
Keep in mind that the we will be releasing new versions of the game in the future where they will be brought up to the Campaign Series Vietnam standards.
Here are some answers:
You can access the labels by pressing SHIFT and you can leave them on the map by pressing SHIFT + ALT. Might take a couple tries, but it does work.1. Am I correct, there is no way to turn on/off map labels - they either have them or not?
If you have the Unit List displayed (Pressing U), you can see the hex information in the Unit List (under the units)2. Am I correct, there is no way to view hex characteristics - height, terrain types, road, etc?
That is also how you can identify the elevation level as it is displayed in the Unit LIst information area.3. Are there no hex elevations? If there are, how do you view them?
No, it is relegated to the bottom.4. Any way to change toolbar position from bottom to top or side?
Unfortunately, no.5. Any way to zoom in or enlarge 2D maps? I can hardly see the hexes and units. I'm using 1920x1280.
Basically, if the unit does not have an empty bullet icon in the Unit Information Box in the Unit List (top left, typically), then it is in ammo.6. How do you assess whether a unit is supplied or not?
Keep in mind that the we will be releasing new versions of the game in the future where they will be brought up to the Campaign Series Vietnam standards.
Re: Newbie Questions
Thanks for the answers.
Will the future upgrades be a free download, or a completely new game for a price?
Thanks,
Mike
Will the future upgrades be a free download, or a completely new game for a price?
Thanks,
Mike
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
They will be released as new games.
- robertahyuk
- Posts: 29
- Joined: Wed Apr 19, 2017 3:02 pm
Re: Newbie Questions delete saved games
Haven't had this game in years and can't remember how to delete all the saved games?
Anyone help me out here?
Anyone help me out here?
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
They should be in the main folder, if I recall correctly. They are called ".btl" files. You can delete those.
-
irfanahmed1979
- Posts: 59
- Joined: Thu Dec 13, 2018 10:45 am
Re: Newbie Questions
Another Newbie question,
There are map, scenario and OOB editors. Are there any unit editors? I'll be more specific here: In the North African campaign playing as a British armoured unit commander my cruiser tanks get beaten up pretty badly (which maybe be very realistic and historically accurate) but is there a way to increase their armour and the power of their guns?
Sorry, I still don't exactly know how the game works but will read the manual once I get the time.
There are map, scenario and OOB editors. Are there any unit editors? I'll be more specific here: In the North African campaign playing as a British armoured unit commander my cruiser tanks get beaten up pretty badly (which maybe be very realistic and historically accurate) but is there a way to increase their armour and the power of their guns?
Sorry, I still don't exactly know how the game works but will read the manual once I get the time.
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
There is not a unit editor.
BUT.
You can edit the platoon files and then encrypt them for use in your game.
BUT.
You can edit the platoon files and then encrypt them for use in your game.
-
irfanahmed1979
- Posts: 59
- Joined: Thu Dec 13, 2018 10:45 am
Re: Newbie Questions
How do I do that?Jason Petho wrote: Mon Jan 16, 2023 5:28 am There is not a unit editor.
BUT.
You can edit the platoon files and then encrypt them for use in your game.
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
You'll want to open the platoon file you want to edit using NOTEPAD or WORDPAD, adjust the values you want and then save it.
You can then email me the files to encrypt.
You can then email me the files to encrypt.
-
irfanahmed1979
- Posts: 59
- Joined: Thu Dec 13, 2018 10:45 am
Re: Newbie Questions
Could you help me locate some platoon files? I don't know which ones to open. Let's say I want to open a British artillery unit for the North African campaign that is equipped with the 25-pounder. Which relevant file would I need to open?Jason Petho wrote: Sun Jan 29, 2023 2:26 am You'll want to open the platoon file you want to edit using NOTEPAD or WORDPAD, adjust the values you want and then save it.
You can then email me the files to encrypt.
Edit: Ok found platoon09.oob. Now what? what does each number stand for?
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
Each number is a different country within the game.
For WEST FRONT the country list is as follows:
BLUE FORCES
----------
USSR 00
France 08
UK 09
US 10
Netherlands 11
Belgium 12
Yugoslavia 13
Norway 14
Greece 15
Allied Romania 17
Allied Italy 18
Free French 19
Iran 28
Iraq 29
Republican Spain 31
Albania 32
Brazil 33
Ethiopia 34
Allied Bulgaria 37
RED FORCES
---------
Germany 01
Italy 02
Hungary 04
Vichy France 16
Axis USSR 24
Bulgaria 26
Croatia 27
Fascist Spain 30
For WEST FRONT the country list is as follows:
BLUE FORCES
----------
USSR 00
France 08
UK 09
US 10
Netherlands 11
Belgium 12
Yugoslavia 13
Norway 14
Greece 15
Allied Romania 17
Allied Italy 18
Free French 19
Iran 28
Iraq 29
Republican Spain 31
Albania 32
Brazil 33
Ethiopia 34
Allied Bulgaria 37
RED FORCES
---------
Germany 01
Italy 02
Hungary 04
Vichy France 16
Axis USSR 24
Bulgaria 26
Croatia 27
Fascist Spain 30
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
I'm trying to find my how to mod document that explains how to mod the files.
Be patient, I'm sure I'll find it.
Be patient, I'm sure I'll find it.
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
Check your IM's, irfanahmed1979
-
irfanahmed1979
- Posts: 59
- Joined: Thu Dec 13, 2018 10:45 am
Re: Newbie Questions
Nice! Thanks
-
irfanahmed1979
- Posts: 59
- Joined: Thu Dec 13, 2018 10:45 am
Re: Newbie Questions
Is the encryption program property of the Devs or can it be shared?
- Jason Petho
- Posts: 17587
- Joined: Tue Jun 22, 2004 10:31 am
- Location: Terrace, BC, Canada
- Contact:
Re: Newbie Questions
Encryption cannot be shared
But I'm happy to encrypt the files for you
But I'm happy to encrypt the files for you
-
irfanahmed1979
- Posts: 59
- Joined: Thu Dec 13, 2018 10:45 am
Re: Newbie Questions
Ok, thank you. Will you also encrypt the weapons file?Jason Petho wrote: Sun Jan 29, 2023 5:40 am Encryption cannot be shared
But I'm happy to encrypt the files for you