[WAD] Possible sensor bug (build 1.08 1728.2).

Post bug reports and ask for game support here.

Moderator: MOD_Command

Post Reply
foxid259
Posts: 56
Joined: Wed Aug 10, 2022 1:31 pm
Location: Ukraine

[WAD] Possible sensor bug (build 1.08 1728.2).

Post by foxid259 »

Hi everyone,
I’ve encountered a recurring issue with the 48Ya-K1 radar (unit #3431) in Command Modern Operations that may indicate a bug or misconfigured sensor behavior.

Problem description:
The radar fails to detect any aircraft flying above 33,500 feet — even when they pass directly overhead. This was discovered while testing a custom scenario with four different aircraft, each having distinct radar cross-section (RCS) values. All aircraft were flying at the same altitude (above 33,500 ft), and none were detected by the 48Ya-K1.

Steps to reproduce:
1. Launch a custom test scenario with four aircraft of varying RCS.
2. Set all aircraft to fly at altitudes above 33,500 ft.
3. Position radar 48Ya-K1 directly beneath their flight path.
4. Observe that no detections occur, even with direct overflight.

Expected behavior:
The radar should detect aircraft within its coverage zone, especially during direct overflight, regardless of altitude (within technical limits) or RCS.

Actual behavior:
No aircraft are detected above 33,500 ft. This creates a critical blind spot in air defense coverage.

Additional notes:
• Game version: 1.08 Build 1728.2
• Platform: Steam
• Scenario: Custom test setup (no mods)
• Issue history: The bug may have existed in earlier builds — it was discovered by chance.
• Other radars: Radars operating in the E/F bands detect the same aircraft at high altitudes without issue.
• Terrain settings: The issue persists regardless of whether Effects of Terrain Type or Effects of Terrain Type - ADVANCED are enabled or disabled — these settings have no impact on the radar’s behavior in this case.

Suggestion:
Please review the configuration of the 48Ya-K1 radar, especially:
• Maximum detection altitude
• Frequency band behavior
• Beam pattern and elevation limits
• Sensor model logic for high-altitude RCS handling
Happy to provide logs, scenario files, or further testing if needed. Thanks in advance for looking into this!
Attachments
radar bag.zip
(12.49 KiB) Downloaded 15 times
Bag-1.jpg
Bag-1.jpg (538.23 KiB) Viewed 334 times
Bag-2.jpg
Bag-2.jpg (500.73 KiB) Viewed 334 times
BDukes
Posts: 2772
Joined: Wed Dec 27, 2017 12:59 pm

Re: Possible sensor bug (build 1.08 1728.2).

Post by BDukes »

Book value is max altitude is 10km which is 32808.4 ft. You do see these systems deployed with other high altitude systems.

M
" You have to be realistic about these things." ~Logan Ninefingers
foxid259
Posts: 56
Joined: Wed Aug 10, 2022 1:31 pm
Location: Ukraine

Re: Possible sensor bug (build 1.08 1728.2). (It has been resolved)

Post by foxid259 »

BDukes wrote: Fri Oct 24, 2025 6:38 pm Book value is max altitude is 10km which is 32808.4 ft. You do see these systems deployed with other high altitude systems.

M
Do you mean that the maximum target detection altitude is 10 km?
I'm a little embarrassed not to know the technical specifications... :D

In that case, the question is closed.
User avatar
Blast33
Posts: 809
Joined: Mon Dec 31, 2018 1:23 pm
Location: Above and beyond

Re: [WAD] Possible sensor bug (build 1.08 1728.2).

Post by Blast33 »

See it as a radar especcially developed for low altitude detection.
Post Reply

Return to “Tech Support”