how to avoid oil/resources damage when capturing enemy base

Share your gameplay tips, secret tactics and fabulous strategies with fellow gamers.

Moderators: wdolson, Don Bowen, mogami

Post Reply
kkoovvoo
Posts: 253
Joined: Fri Oct 01, 2004 1:49 pm
Location: Slovakia
Contact:

how to avoid oil/resources damage when capturing enemy base

Post by kkoovvoo »

I already captured a base but all oil and resources centers are damaged.

I thought oil and resources centers are damaged only by:
1/ air (city) atrtacks
2/ ground combat

There was some ground combat but it took me only 5-6 days to take the base (2 shock attacks).

I also massively bombarded the base from air (90% ground attacks/10% port attacks) and there were also naval bombardments (but I tested naval bomb. in tutorial and it caused no damage to il and resources centers)


Now all the centers are damaged and the base produce nothing...

Any advices how to prevent this?

thanks guys


User avatar
Dereck
Posts: 3266
Joined: Mon Sep 06, 2004 10:43 pm
Location: Romulus, MI

RE: how to avoid oil/resources damage when capturing enemy base

Post by Dereck »

I'm not sure there IS a way to prevent damage. If the base has an engineer unit in it they will damage the facility before they leave .
PO2 US Navy (1980-1986);
USS Midway CV-41 (1981-1984)
Whidbey Island, WA (1984-1986)
Naval Reserve (1986-1992)
User avatar
Oznoyng
Posts: 818
Joined: Thu Apr 15, 2004 10:05 pm
Location: Mars

RE: how to avoid oil/resources damage when capturing enemy base

Post by Oznoyng »

ORIGINAL: kkoovvoo

I already captured a base but all oil and resources centers are damaged.

I thought oil and resources centers are damaged only by:
1/ air (city) atrtacks
2/ ground combat

There was some ground combat but it took me only 5-6 days to take the base (2 shock attacks).

I also massively bombarded the base from air (90% ground attacks/10% port attacks) and there were also naval bombardments (but I tested naval bomb. in tutorial and it caused no damage to il and resources centers)


Now all the centers are damaged and the base produce nothing...

Any advices how to prevent this?

thanks guys

Disrupt engineers at the base before you attack. Letting up even a bit before the base is actually taken allows the engineers to rest and do damage. At least three turns before the attack that will take the base, you should be attacking both with airgroups and bombardments. Your air bombardments should take the form of Port and Airfield attacks, because your target is the engineers in the hex, not the combat troops. Ground attacks hit the combat units, the bombardments and port/airfield hit the support units. You want the support units as disrupted and fatigued as you can get them. It also helps to have overwhelming force, but the key thing is to disrupt the engineers.
"There is no Black or White, only shades of Grey."
"If you aren't a part of the solution, you're a part of the problem."
User avatar
Sharkosaurus rex
Posts: 467
Joined: Tue Oct 19, 2004 6:25 am
Location: under the waves
Contact:

RE: how to avoid oil/resources damage when capturing enemy base

Post by Sharkosaurus rex »

The manual says the defender needs to have engineers in the hex to damage some of the oil and resource facilities, but the silly thing is- even unoccupied hexes get their oil pumps sabotaged and there's nothin' you can do!
Is Sharkosaurus rex the biggest fish in the sea?
Why don't you come in for a swim?
kkoovvoo
Posts: 253
Joined: Fri Oct 01, 2004 1:49 pm
Location: Slovakia
Contact:

RE: how to avoid oil/resources damage when capturing enemy base

Post by kkoovvoo »

The base was also attacked by several naval bombardments before it was captured - the last bombardment was on the same day the base fell, causing 1.600 casualties (of 8.000-11.000).

The naval bombardment is killing support troops and dice rolls were on my side very much.

I really couldnt believe my eyes. First I thought that I was mistaken and undamaged centers are in parenthesis [:'(]
User avatar
doktorblood
Posts: 561
Joined: Fri Feb 14, 2003 5:40 am

RE: how to avoid oil/resources damage when capturing enemy base

Post by doktorblood »

I'm not sure that there is anything that you can do to reduce such damage. It appears to be a random result to me.
Image
User avatar
Hoplosternum
Posts: 663
Joined: Wed Jun 12, 2002 8:39 pm
Location: Romford, England

RE: how to avoid oil/resources damage when capturing enemy base

Post by Hoplosternum »

Yes I think it may be random. I held Palembang until May/June in one PBEM I have going. I did not reinforce it and my opponent bombarded it numerous times by air and sea. When he took it with overwhelming force (first ground attack i believe) he said it was fairly smashed up.

I hope not many PBEM games are spoilt by unlucky rolls on the three or so key oil places. It's one thing for the IJ player to let the allies strategic bomb these places, but quite another to have him stuffed by losing a large amount of oil capacity to a roll he seems to have little control over.
User avatar
Drex
Posts: 2512
Joined: Wed Sep 13, 2000 8:00 am
Location: Chico,california

RE: how to avoid oil/resources damage when capturing enemy base

Post by Drex »

Not all demolition operations are successful. Die rolls allow damage to go either way. I have captured bases intact many times even with engineers present.
Col Saito: "Don't speak to me of rules! This is war! It is not a game of cricket!"
User avatar
castor troy
Posts: 14331
Joined: Mon Aug 23, 2004 10:17 am
Location: Austria

RE: how to avoid oil/resources damage when capturing enemy base

Post by castor troy »

In one of my ongoing PBEM my opponent let my take control of two cities in China without a fight and after my deliberate attack the resources, oil, manpower and HI were damaged. Not completly destroyed but all damaged. So what´s wrong here? It appears that there´s always a dice roll no matter if there are troops at the base or not.
User avatar
Sharkosaurus rex
Posts: 467
Joined: Tue Oct 19, 2004 6:25 am
Location: under the waves
Contact:

RE: how to avoid oil/resources damage when capturing enemy base

Post by Sharkosaurus rex »

Manpower centres are divided by 10. So a 30 factor MP site will be worth only 3 for you.
HI is halved each time it is captured.
Oil and resources the Japs are getting ripped off. Everytime I capture Miri (on Boreno) bang the oil gets blasted. And many other unoccupied oil/resource sites too. This must be randon though.
Is Sharkosaurus rex the biggest fish in the sea?
Why don't you come in for a swim?
User avatar
castor troy
Posts: 14331
Joined: Mon Aug 23, 2004 10:17 am
Location: Austria

RE: how to avoid oil/resources damage when capturing enemy base

Post by castor troy »

ORIGINAL: Sharkosaurus rex

Manpower centres are divided by 10. So a 30 factor MP site will be worth only 3 for you.
HI is halved each time it is captured.
Oil and resources the Japs are getting ripped off. Everytime I capture Miri (on Boreno) bang the oil gets blasted. And many other unoccupied oil/resource sites too. This must be randon though.


Yes correct. But HI and MP is not just divided, I also get damaged parts AFTER it was already divided even if a base is taken without a fight.
AmiralLaurent
Posts: 3351
Joined: Tue Mar 11, 2003 8:53 pm
Location: Near Paris, France

RE: how to avoid oil/resources damage when capturing enemy base

Post by AmiralLaurent »

It's not especially random. If the attacking side has more ENG than the defending side, the ressources and oil will probably be intact (or no more than 10% damaged). I have repeated this several times on Kendari, Balikpapan, Palembang, Johore Bharu and other places. Having 1 or several ENG Rgts in the attacking force really helps. None of this big centers was damaged more than 10% when I took them. I managed to take Palembang almost undamaged in all my games due (IMHO) to the fact that I use 2 divisions and 2-3 Eng Rgt, all with prep more than 50, to take it.

On the other side everytime I took a base with naval units (SNLF and so on) or paras, that have no engineer squads, the base will be wrecked, even after weeks of pounding.

By the way an empty base will be destroyed at 10 to 30% if you take if without engineers on your side. If you have engineers it will probably be intact.

According to other players on thios forum, damaged to oil/ressources will be reduced if the final attack is deliberate rather than shock. I think also it is a good thing that the attacking troops have a good prep for the target.
User avatar
Sharkosaurus rex
Posts: 467
Joined: Tue Oct 19, 2004 6:25 am
Location: under the waves
Contact:

RE: how to avoid oil/resources damage when capturing enemy base

Post by Sharkosaurus rex »

Amiral I think you are right. All the bases I have captured with zero damage are the sites in Malaya and Philippines- were the Allies have withdrawn and I capture with an advancing division using deliberate attack. This bases have 100% production- though most are resources. But other undefended hexes that have been captured by smaller Jap units (obviously with less or no engineers) have resulted in major demoltions of oil and resources. Contested have have received some damage too but usually not as much. Well any remaining production sites will only have an overwhelming presence of engineers from now on.
Is Sharkosaurus rex the biggest fish in the sea?
Why don't you come in for a swim?
worr
Posts: 913
Joined: Wed Feb 07, 2001 10:00 am

RE: how to avoid oil/resources damage when capturing enemy base

Post by worr »

ORIGINAL: Oznoyng
It also helps to have overwhelming force, but the key thing is to disrupt the engineers.

I have found an overwhelming force counter productive to limiting damage. A smaller force that takes more turns to capture a base seems to wear down the Engineers in the port more so than a one time overwhelming attack does.

I agree with others that I've captured bases wholesale with ENG units and no damage. But I do not believe it is random. I believe there is another game variable that goes into the equation. PM me if you want to learn more.

Worr, out
User avatar
Oleg Mastruko
Posts: 4534
Joined: Sat Oct 21, 2000 8:00 am

RE: how to avoid oil/resources damage when capturing enemy base

Post by Oleg Mastruko »

ORIGINAL: AmiralLaurent
It's not especially random. If the attacking side has more ENG than the defending side, the ressources and oil will probably be intact (or no more than 10% damaged).

No it's VERY random.

I always bring 1-2 ENG Rgts (+ organic engineers in INF divisions) as IJA when attacking DEI centres and as of lately capture them 70-100% damaged. Defenders have like 1-2 Dutch base units at most so no way they could have even the 20% of my number of engineers, yet, if you're unlucky enough as I am lately, this is what happens.

I think it is very random.

O.
User avatar
jwilkerson
Posts: 8253
Joined: Sun Sep 15, 2002 4:02 am
Location: Kansas
Contact:

RE: how to avoid oil/resources damage when capturing enemy base

Post by jwilkerson »

I even had an empty base get very damaged upon capture, so I agree with random ... however the bases I've captured intact with zero damage have either been empty or .. I bombed the heck out of the airbase and thus disrupted all the engineers. So I'd say random with an ability to influence by killing or disrupting all the defending engineers.

WITP Admiral's Edition - Project Lead
War In Spain - Project Lead
User avatar
Charles2222
Posts: 3687
Joined: Mon Mar 12, 2001 10:00 am

RE: how to avoid oil/resources damage when capturing enemy base

Post by Charles2222 »

ORIGINAL: jwilkerson

I even had an empty base get very damaged upon capture, so I agree with random ... however the bases I've captured intact with zero damage have either been empty or .. I bombed the heck out of the airbase and thus disrupted all the engineers. So I'd say random with an ability to influence by killing or disrupting all the defending engineers.


Have you ever considered the weather upon capture? Perhaps a rainy day brings the engineer's fires being put out naturally. [;)].
AmiralLaurent
Posts: 3351
Joined: Tue Mar 11, 2003 8:53 pm
Location: Near Paris, France

RE: how to avoid oil/resources damage when capturing enemy base

Post by AmiralLaurent »

If you have a lot of engineers and the enemy has few undirsupted engineers in the hex, the base is almost intact. I always do that in important locations (Palembang, Kuala Lumpur and Balikpapan) and the worst I have seen is 20% damage. Especially in Palembang I usually besiege it for 15 days pounding the enemy with ships, AC and artillery and has never seen more than 5% damage here.
Post Reply

Return to “The War Room”