How to design a night fighter?

Gary Grigsby's strategic level wargame covering the entire War in the Pacific from 1941 to 1945 or beyond.

Moderators: Joel Billings, wdolson, Don Bowen, mogami

User avatar
BossGnome
Posts: 658
Joined: Sat May 29, 2004 12:13 am
Location: Canada

How to design a night fighter?

Post by BossGnome »

I was just wondering how, in 1942, people were supposed to design night fighters? Now, its easy, with infrared vision, etc etc, but back then, what specs made the aircraft flyable or unfliable at night? I remember reading that the A6M2 zero was almost worthless at night. Then what makes an aircraft type (especially on the part of the japanese and their low technology) "workable" at night?
"Hard pressed on my right; my left is in retreat. My center is yielding. Impossible to maneuver. Situation excellent. I am attacking."
-Gen. Joffre, before the battle of the Marne
User avatar
Brady
Posts: 6084
Joined: Fri Oct 25, 2002 12:48 pm
Location: Oregon,USA

RE: How to design a night fighter?

Post by Brady »

In the game the Allies get a Havoc as the first NF in game Night fighter, it has no radar, the Japanese get an Irving again no radar, basicaly like many other planes flow by many other countries that were so equiped, that is no radar, they stumbled around in the dark and hoped to find a target, operations were largely restriced to favorable condations that included hopefully moon light to help them find their targets. Low techonalogy was the word of the day and the Japanese had no monopoly on it. They did have a very interesting landing system that helped their piolets land at knight though, something the allies did not have, at least the Japanese Navy did, the Japanese Navy did not use batmen like the US did aparently they had a light system that helped the men land and they used this on shore bases as well and they used it at night, i posted a quote or two on this in the past I will see if I cant find it.

................

Found it:

p.22 Imperial Japanese Naval Aviator 1937-45, Osamu Tagaya:

" Unlike carrier operations in the US and British Royal Navys, The IJN did not imploy a Landing signals officer to stand on the flight deck and manualy guied planes down. In the imperial Navy a system of lights near the stearn of the flight deck allowed the piolets to guied themselfs in for a landing. Their were two seperate rows of lights extending out from the side of the flight deck positioned at different heights, one red one blue. The Object was for the piolet to keep the two rows perfectly aligned with each other. This allowed his aircraft to descend at the proper five- to six degree angle for a successful touch down, If the row of red lights apeard higher to the piolet than the row of blue lights his approach was too low. Conversely, if the red lights were seen below the blue lights, he was to high. This system was also used for guiding piolets for night landings at airfields."


Image


SCW Beta Support Team

Beta Team Member for:

WPO
PC
CF
AE
WiTE

Obi-wan Kenobi said it best: A lot of the reality we perceive depend on our point of view
User avatar
ChezDaJez
Posts: 3293
Joined: Fri Nov 12, 2004 7:08 am
Location: Chehalis, WA

RE: How to design a night fighter?

Post by ChezDaJez »

" Unlike carrier operations in the US and British Royal Navys, The IJN did not imploy a Landing signals officer to stand on the flight deck and manualy guied planes down. In the imperial Navy a system of lights near the stearn of the flight deck allowed the piolets to guied themselfs in for a landing. Their were two seperate rows of lights extending out from the side of the flight deck positioned at different heights, one red one blue. The Object was for the piolet to keep the two rows perfectly aligned with each other. This allowed his aircraft to descend at the proper five- to six degree angle for a successful touch down, If the row of red lights apeard higher to the piolet than the row of blue lights his approach was too low. Conversely, if the red lights were seen below the blue lights, he was to high. This system was also used for guiding piolets for night landings at airfields."

Sounds very much like the Fresnel lighting system we use now on carriers.

Chez
Ret Navy AWCS (1972-1998)
VP-5, Jacksonville, Fl 1973-78
ASW Ops Center, Rota, Spain 1978-81
VP-40, Mt View, Ca 1981-87
Patrol Wing 10, Mt View, CA 1987-90
ASW Ops Center, Adak, Ak 1990-92
NRD Seattle 1992-96
VP-46, Whidbey Isl, Wa 1996-98
User avatar
Sardaukar
Posts: 12736
Joined: Wed Nov 28, 2001 10:00 am
Location: Finland/Israel

RE: How to design a night fighter?

Post by Sardaukar »

in Europe there was also Wilde Sau operation by Germans:

From: WW II Guide

"Wilde Sau "Wild Boar"

To combat the widespread use of Window it was decided to light up the skies as brightly as possible during an air raid. Along with the fires started from bombing this provided enough illumination to allow single-engine day fighters to attack enemy bombers. Above a pre-arranged flak free altitude usually 15,000ft (4570m) these fighters would patrol waiting to pounce on bombers now clearly silhouetted. Major Hans-Joachim "Hajo" Herrmann, a veteran of 300 bombing missions against England and Malta, initiated the Wilde Sau idea. In addition to the above tactics Wilde Sau were given a large degree of freedom in seeking out and attacking enemy aircraft. Encouraged to use their own judgement and take the initiative even to the point of disregarding orders the Wilde Sau were freelancers in the night war. At first "Hajo" Herrmann formed a Kommando of twelve Fw 190A-4 fighters with 66 gallon drop tanks to increase their endurance. On July 3 the Kommado group shot down 12 RAF bombers over Colonge."
"To meaningless French Idealism, Liberty, Fraternity and Equality...we answer with German Realism, Infantry, Cavalry and Artillery" -Prince von Bülov, 1870-

Image
User avatar
m10bob
Posts: 8583
Joined: Sun Nov 03, 2002 9:09 pm
Location: Dismal Seepage Indiana

RE: How to design a night fighter?

Post by m10bob »

The exhaust manifolds on those old engines all had special covers to prevent the exhaust flames from blinding the pilots.
The guns themselves also had similiar shields, (similar to the Enfield jungle carbine).
The crew themselves were given rigorous "optical" training and not allowed to "walk around while the sun was out".
Don't remember the books I got this from, but I did read it over the years.

http://www.wpafb.af.mil/museum/history/wwii/nf.htm

http://www.acepilots.com/planes/p61_black_widow.html

http://www.chez.com/warbirds/porter.html

http://www.usaaf.net/ww2/night/nightpg6.htm
Image

User avatar
Rob Brennan UK
Posts: 3685
Joined: Sat Aug 24, 2002 8:36 pm
Location: London UK

RE: How to design a night fighter?

Post by Rob Brennan UK »

I liked the idea of strapping a search light to the front of a hudson ( cant remember official designation) as a target illuminator for other gun equipped units to attack. ( Brit development against the Blitz)

Was completely useless in combat, but its an innovative idea for 1940. [:D][:D]
sorry for the spelling . English is my main language , I just can't type . and i'm too lazy to edit :)
User avatar
keeferon01
Posts: 334
Joined: Fri Jun 17, 2005 10:50 pm
Location: North Carolina

RE: How to design a night fighter?

Post by keeferon01 »

ORIGINAL: BossGnome

I was just wondering how, in 1942, people were supposed to design night fighters? Now, its easy, with infrared vision, etc etc, but back then, what specs made the aircraft flyable or unfliable at night? I remember reading that the A6M2 zero was almost worthless at night. Then what makes an aircraft type (especially on the part of the japanese and their low technology) "workable" at night?

What was the first allied plane to use radar, off the top of my head I cant remember.
herwin
Posts: 6047
Joined: Thu May 27, 2004 9:20 pm
Location: Sunderland, UK
Contact:

RE: How to design a night fighter?

Post by herwin »

ORIGINAL: BossGnome

I was just wondering how, in 1942, people were supposed to design night fighters? Now, its easy, with infrared vision, etc etc, but back then, what specs made the aircraft flyable or unfliable at night? I remember reading that the A6M2 zero was almost worthless at night. Then what makes an aircraft type (especially on the part of the japanese and their low technology) "workable" at night?

You need target acquisition and target kill capability. Defense wasn't a major issue. Prior to airborne radar, target acquisition usually meant ground controlled intercept. Target kill meant firepower.

The USN night carriers used airborne radar platforms (TBFs) for acquisition and fighters for the kill (F6Fs).
Harry Erwin
"For a number to make sense in the game, someone has to calibrate it and program code. There are too many significant numbers that behave non-linearly to expect that. It's just a game. Enjoy it." herwin@btinternet.com
User avatar
BossGnome
Posts: 658
Joined: Sat May 29, 2004 12:13 am
Location: Canada

RE: How to design a night fighter?

Post by BossGnome »

so bascially up until the allies start using a radar a "night fighter" is just basically a normal plane with some nighttime trained pilots and some fire suppressors to keep the pilot's night vision?
"Hard pressed on my right; my left is in retreat. My center is yielding. Impossible to maneuver. Situation excellent. I am attacking."
-Gen. Joffre, before the battle of the Marne
User avatar
Brady
Posts: 6084
Joined: Fri Oct 25, 2002 12:48 pm
Location: Oregon,USA

RE: How to design a night fighter?

Post by Brady »


They had cupolders instaled as well...........


Image


SCW Beta Support Team

Beta Team Member for:

WPO
PC
CF
AE
WiTE

Obi-wan Kenobi said it best: A lot of the reality we perceive depend on our point of view
User avatar
ChezDaJez
Posts: 3293
Joined: Fri Nov 12, 2004 7:08 am
Location: Chehalis, WA

RE: How to design a night fighter?

Post by ChezDaJez »

Then what makes an aircraft type (especially on the part of the japanese and their low technology) "workable" at night?

So long as the aircraft is a good flyer, it doesn't matter whether its day or night. It doesn't care.

The pilot however does care.... a lot! It's somewhat ironic that the Japanese were ahead of us in the field on nightblindness and night vision adaptability prior to the war but didn't teach their pilots night adaptability. They had researched and identified vitamin A as a primary vision aid along with a few others. They applied this knowledge to their naval lookouts but not pilots.

They did field a night fighter unit flying Ki-45 Niks in early 43 but it had no means of detecting another aircraft other than visual. I have not read of any great successes by these planes until very late in the war and even then the few shootdowns they had could hardly qualify as a great success.

Chez
Ret Navy AWCS (1972-1998)
VP-5, Jacksonville, Fl 1973-78
ASW Ops Center, Rota, Spain 1978-81
VP-40, Mt View, Ca 1981-87
Patrol Wing 10, Mt View, CA 1987-90
ASW Ops Center, Adak, Ak 1990-92
NRD Seattle 1992-96
VP-46, Whidbey Isl, Wa 1996-98
Ideologue
Posts: 47
Joined: Tue Dec 14, 2004 1:33 am

RE: How to design a night fighter?

Post by Ideologue »

ORIGINAL: Ron James

What was the first allied plane to use radar, off the top of my head I cant remember.

Some iteration of a Bristol Beaufighter, if I recall. I believe a few were equipped with AI radar in late 1940.
Ideologue
Posts: 47
Joined: Tue Dec 14, 2004 1:33 am

RE: How to design a night fighter?

Post by Ideologue »

The bad thing about NFs in WitP is that they are almost completely worthless, even relatively advanced ones like the late-war Mosquitos or the Black Widow, and even moreso than I'd expect they were historically.

Given a thousand sorties, they can't hit airfields or ports at night more than four or five times, and usually then only at significantly greater operational loss to their own. They can't, despite their widespread use in the ETO for such missions, be used for city attack, either. I've never actually conducted an air-to-air engagement with them.

I dunno, I know night fighters were more of a European weapon, but they seem mostly for flavor here.

Any ideas on how to use 'em more effectively?
Mike Scholl
Posts: 6187
Joined: Wed Jan 01, 2003 1:17 am
Location: Kansas City, MO

RE: How to design a night fighter?

Post by Mike Scholl »

ORIGINAL: Ideologue

The bad thing about NFs in WitP is that they are almost completely worthless, even relatively advanced ones like the late-war Mosquitos or the Black Widow, and even moreso than I'd expect they were historically.

Given a thousand sorties, they can't hit airfields or ports at night more than four or five times, and usually then only at significantly greater operational loss to their own. They can't, despite their widespread use in the ETO for such missions, be used for city attack, either. I've never actually conducted an air-to-air engagement with them.

I dunno, I know night fighters were more of a European weapon, but they seem mostly for flavor here.

Any ideas on how to use 'em more effectively?

Try using them for CAP. They are night FIGHTERS, not pathfinders.
Ideologue
Posts: 47
Joined: Tue Dec 14, 2004 1:33 am

RE: How to design a night fighter?

Post by Ideologue »

Not much to defend from, though.
User avatar
BossGnome
Posts: 658
Joined: Sat May 29, 2004 12:13 am
Location: Canada

RE: How to design a night fighter?

Post by BossGnome »

anyone ever try using them simply as normal fighters? if theres nothing coming at you at night, simply use them during the day no?
"Hard pressed on my right; my left is in retreat. My center is yielding. Impossible to maneuver. Situation excellent. I am attacking."
-Gen. Joffre, before the battle of the Marne
User avatar
wild_Willie2
Posts: 2934
Joined: Fri Oct 08, 2004 10:33 am
Location: Arnhem (holland) yes a bridge to far...

RE: How to design a night fighter?

Post by wild_Willie2 »

anyone ever try using them simply as normal fighters? if theres nothing coming at you at night, simply use them during the day no?

They get clobbert by almost everything else, they are slower and less manuverable than "day" fighters.....
In vinum illic est sapientia , in matera illic est vires , in aqua illic es bacteria.

In wine there is wisdom, in beer there is strength, in water there are bacteria.
User avatar
Reg
Posts: 2793
Joined: Fri May 26, 2000 8:00 am
Location: NSW, Australia

RE: How to design a night fighter?

Post by Reg »

ORIGINAL: Rob Brennan UK

I liked the idea of strapping a search light to the front of a hudson ( cant remember official designation) as a target illuminator for other gun equipped units to attack. ( Brit development against the Blitz)

Was completely useless in combat, but its an innovative idea for 1940. [:D][:D]

The aircraft were Boston/Havocs. See the links below

Turbinlite

Turbinlite Squadron Histories
See No. 530 to 539 Squadrons (Don't forget to follow the Aircraft and Markings links)
Cheers,
Reg.

(One day I will learn to spell - or check before posting....)
Uh oh, Firefox has a spell checker!! What excuse can I use now!!!
Hipper
Posts: 254
Joined: Mon Jun 14, 2004 10:21 pm

RE: How to design a night fighter?

Post by Hipper »

By 1942 nightfighters were quite old hat !

I think the first ones that make their appearance in this theatre should be the AI beafighters protecting calcutta in 1943 !

but AI radar had been in use to varying degrees of effectiveness since winter 1940/41

I have had some successes with the Night fighting blenheims in Singapore but the key is pilot experience

Cheers

Hipper


"Gefechtwendung nach Steuerbord"
User avatar
m10bob
Posts: 8583
Joined: Sun Nov 03, 2002 9:09 pm
Location: Dismal Seepage Indiana

RE: How to design a night fighter?

Post by m10bob »

Image

Post Reply

Return to “War In The Pacific - Struggle Against Japan 1941 - 1945”