Initial setup

Post bug reports and ask for game support here.

Moderator: Shannon V. OKeets

palad1n
Posts: 20
Joined: Thu Jan 19, 2012 7:30 am
Location: Australia

Initial setup

Post by palad1n »

Matrix WIF misses the point. Initial setup also INCLUDES the current year units - for major powers. For ex, Italy can "legally" remove all those 3 movement factor TRSs at the start of the Sep/Oct 39 game leaving them with one TRS (4/3) in the force pools. There is, however, one 1939 TRS that MWiF does not recognise as a valid setup unit (as an aside this is NOT the only instance). The rules are quite explicit - (and I quote) "If there are not enough units in the force pool to set up a unit, and you have not removed any of those units from the force pool, you may randomly select a unit of that type from those available in the NEXT year. The previous page in the scenario setup manual states to set aside units that have an availability date on their back that is later than the game's starting year (they will become available later). Note that both these RULES relate to later years NOT the current year. Thus, if the Italian player elects to scrap all the 3 factor TRSs (due to age) he/she should then be able to have the 1939 4/3 TRS. MWiF does not ALLOW this, presumably using the rules that apply to the minor countries. Ipsofacto, MWiF is WRONG. To support this hypothesis the following is from Harry Rowland - Yep that's right Don, current year units may be chosen. Feel free to drop matrix a line if that is not the case in computer wif.

regards
Harry
On 10/07/2014 1:26 PM, Don Harris wrote:
Chaps, (Harry, Ray – FYI & comment if you want)

The scenarios booklet states (on page 4 column 2 immediately underneath the grey options):

“If there are not enough units in the force pool to set up a unit, and you have not removed any of those units from the force pool, you may randomly select a unit of that type from those available in the next year.”

But, on page 3 the second dot point states; ‘set aside these units for now “units with an availability date on their back that is later than the game’s starting year. …”’

Both statements refer to later year(s), not the current year of the scenario start, so my interpretation is that 1939 units are a part of the initial setup forces for global war (and similar for other scenarios as well).

Does this mean that Matrix WIF has it wrong? Probably, but they may have consulted Harry and/or used the setup rules for minors, so who knows.

Italy is OK with selecting the 1939 TRS, AFAIC.

Have fun,
User avatar
Centuur
Posts: 9077
Joined: Fri Jun 03, 2011 12:03 pm
Location: Hoorn (NED).

RE: Initial setup

Post by Centuur »

It's perhaps due to the fact that I'm a guy who isn't a native English speaker, but I don't understand what you've written here. What's the bug exactly? What is wrong? What rule isn't enforced? I can't follow your reasoning at all..
Peter
User avatar
paulderynck
Posts: 8494
Joined: Sat Mar 24, 2007 5:27 pm
Location: Canada

RE: Initial setup

Post by paulderynck »

I'm not sure of the issue either and I am a native English speaker. One problem may be that if you play the boardgame with all the units from AiF and PaTiF, you'll have more TRSs in the game than MWiF has. If you're used to playing without SiF, you'll have less.

At any rate, yes you do use the current year units for set-up (1939 for Global War) but you can only scrap units from 1935 or before since you are neutral to start (except Japan and China), and per the rules quote above - if you do "over-scrap", than you cannot take a unit from a future year to satisfy set-up requirements.

I don't think there's any problem with MWiFs unit counts.

Paul
palad1n
Posts: 20
Joined: Thu Jan 19, 2012 7:30 am
Location: Australia

RE: Initial setup

Post by palad1n »

Mayhap this is not exactly a bug, but more a basic programming error. AFAIC it is too many none players versus those that actually play the game being involved with the development of MWIF. The scenario setup rules are quite explicit, use the NEXT years units. For a game that is to start in S/O 39 this means that all 1939 units (for every MAJOR power) are included with the setup force pools. MWIF, as currently coded, does NOT take this into account. I also refer to the advice from the game's designer, Harry Roland, that this is correct. So do NOT impugn my character and proof validity. The results more then speak for themselves. To me it was an eye opener, I had never expected this to be the case. Yet Harry fully supported my decision. So what does this mean for MWIF- either a bug or basic programming error. And do not please bug me with I cannot understand this emails, it is more than self supporting.
User avatar
paulderynck
Posts: 8494
Joined: Sat Mar 24, 2007 5:27 pm
Location: Canada

RE: Initial setup

Post by paulderynck »

MWiF does include all the 1939 units for setting up. If you find otherwise, post a saved game that demonstrates your issue within it.
Paul
Shannon V. OKeets
Posts: 22165
Joined: Wed May 18, 2005 11:51 pm
Location: Honolulu, Hawaii
Contact:

RE: Initial setup

Post by Shannon V. OKeets »

ORIGINAL: palad1n

Mayhap this is not exactly a bug, but more a basic programming error. AFAIC it is too many none players versus those that actually play the game being involved with the development of MWIF. The scenario setup rules are quite explicit, use the NEXT years units. For a game that is to start in S/O 39 this means that all 1939 units (for every MAJOR power) are included with the setup force pools. MWIF, as currently coded, does NOT take this into account. I also refer to the advice from the game's designer, Harry Roland, that this is correct. So do NOT impugn my character and proof validity. The results more then speak for themselves. To me it was an eye opener, I had never expected this to be the case. Yet Harry fully supported my decision. So what does this mean for MWIF- either a bug or basic programming error. And do not please bug me with I cannot understand this emails, it is more than self supporting.
It would be easier to understand your point if you gave an example (just 1 would be fine) of the program doing something wrong. Quoting the rules without an example forces the reader to understand something in the abstract and generate his own sample cases to try to see what you mean. If the reader chooses sample cases that work, then the point you are trying to make is lost.

===

I looked at the Italian Naval Transports in the Global War scenario, which you mentioned, and I do not see anything wrong.

There are sufficient TRS units for Italy to set up its units - but only if it doesn't scrap any. The setup calls for 2 Italian TRS units. There are 4 available and 3 of them can be scrapped. There are also two more Italian TRS units due to arrive in the force pool in 1940. The Scrap form shown below shows these units. I have added the year under the unit depiction for those that are pre-1940.

If the player chooses to scrap only two of the TRS units, then the other two will be part of the setup. If the player scraps all 3 that can be scrapped, then he will only get 1 TRS for setup.

At no point will the 1940 units be available during setup.

Image
Attachments
ItalianSe..RSunits.jpg
ItalianSe..RSunits.jpg (161.93 KiB) Viewed 505 times
Steve

Perfection is an elusive goal.
palad1n
Posts: 20
Joined: Thu Jan 19, 2012 7:30 am
Location: Australia

RE: Initial setup

Post by palad1n »

The problem is that MWIF does not include PatIF or AmericaIF units. In AIF there is a 1939 TRS for the Italians. SO it is not a bug nor a programming error, it is an error of omission in the first instance - an error that should not have been allowed in the first place as the assumption made (that the AIF and PatIF units only affected games post 1945) was invalid. Discussion ends.
User avatar
warspite1
Posts: 42129
Joined: Sat Feb 02, 2008 1:06 pm
Location: England

RE: Initial setup

Post by warspite1 »

Deleted
Now Maitland, now's your time!

Duke of Wellington to 1st Guards Brigade - Waterloo 18 June 1815
User avatar
Easo79
Posts: 99
Joined: Fri Jul 12, 2013 1:02 pm
Location: Mallorca, Illes Balears

RE: Initial setup

Post by Easo79 »

ORIGINAL: palad1n

So do NOT impugn my character and proof validity. The results more then speak for themselves. To me it was an eye opener, I had never expected this to be the case.

This section looks like a computer-generated random selection of topical pulp fiction sentences...or....

a greatly exaggerated response to a supposedly missing Italian 1939 Transport...what wasteful spending of....mmm... passion!
A l’hora que el sol se pon, bevent al raig de la font, he assaborit els secrets de la terra misteriosa.

Part de dins de la canal he vist l’aigua virginal venir del fosc naixement a regalar-me la boca.
User avatar
paulderynck
Posts: 8494
Joined: Sat Mar 24, 2007 5:27 pm
Location: Canada

RE: Initial setup

Post by paulderynck »

ORIGINAL: palad1n

The problem is that MWIF does not include PatIF or AmericaIF units. In AIF there is a 1939 TRS for the Italians. SO it is not a bug nor a programming error, it is an error of omission in the first instance - an error that should not have been allowed in the first place as the assumption made (that the AIF and PatIF units only affected games post 1945) was invalid. Discussion ends.
Discussion should indeed end when an inability to read past page 3 of the Player's Manual is the cause of allegation.



Image
Attachments
manualpg4.jpg
manualpg4.jpg (45.1 KiB) Viewed 505 times
Paul
User avatar
composer99
Posts: 2931
Joined: Mon Jun 06, 2005 8:00 am
Location: Ottawa, Canada
Contact:

RE: Initial setup

Post by composer99 »

In addition to the AiF/PatiF matter, it appears palad1n's misunderstanding also follows from neglecting the precise text of the very rule palad1n refers to:
If there are not enough units in the force-pool to set up a unit, and you have not removed any of those units from the force-pool, you may randomly select a unit of that type from those available in the next year. [Emphasis mine.]

You only add subsequent years' units if you didn't scrap any from this or previous years' units.
~ Composer99
palad1n
Posts: 20
Joined: Thu Jan 19, 2012 7:30 am
Location: Australia

RE: Initial setup

Post by palad1n »

paulderynck, do not confuse me with an imbecile; I am more then aware that MWiF does NOT include aforementioned add-ons. Let me explain to all those people that do not have a certain level of intelligence. MWiF does not include AiF and PATiF, for very good reasons - these are essentially stand alone games in the WiF environment. What MWiF misses is that each of the add-ons introduce quite a number of units that CAN be part of either playable version of MWiF one chooses. For now let us call these vanilla WiF and expanded WiF. The former uses the naval forces from WiF and the latter the naval forces from SiF. Both AiF and PATiF introduce a number of units that ARE added to the force pools (IAW the rules for each add-on). What units are added does depend on what one is playing. Playing vanilla WiF would also include those CVs and SCSs (BBs, CAs, CLs) that are marked as force pool additions in AiF and PATif. Playing with SiF would exclude these naval units. However there are also a number of other naval, ground and air units that SHOULD be added to the force pools in accordance with the rules PERTAINING TO EACH add-on. However, if we exclude every heavy weapon unit (as stated for MWiF - even though I personally prefer to play with these units), there still remains quite a number of units that SHOULD be included with the force pools. These are aircraft (FTR, LND, NAV, STR) and naval (TRS, AMPH, SUB). Therefore, if MWiF had actually taken these force pool additions into account in the first instance my original post would have been a non event - that is (for those that still cannot comprehend) the 1939 TRS would have been there as a unit for placement on the map. I will post the amended units csv files in due course (to google drive). I would, however, appreciate advice as to the data format for the aircraft csv file - ie which column relates to which aircraft attribute (I suspect that the CVPs drive this).
palad1n
Posts: 20
Joined: Thu Jan 19, 2012 7:30 am
Location: Australia

RE: Initial setup

Post by palad1n »

Actually, an insight into the naval unit columns would be good too.
User avatar
composer99
Posts: 2931
Joined: Mon Jun 06, 2005 8:00 am
Location: Ottawa, Canada
Contact:

RE: Initial setup

Post by composer99 »

I can't speak for conventions outside of the US, but when I've been to the US WiFCon, the AiF/PatiF units (that is, the air & naval units available during the war years) are not included in the available kits. Tournament play is probably the closest one can get to "official" WiF, so on that precedent I don't believe it is appropriate to say that AiF/PatiF units ought or should be included in the MWiF counter mix as published by Matrix Games while those kits are not otherwise implemented in MWiF.

Home games are not tournament games, and I am sure we would all like to see our favourite options implemented where they aren't already, but it's a bit much IMO to proclaim an "ought/should" when none exists.
~ Composer99
User avatar
paulderynck
Posts: 8494
Joined: Sat Mar 24, 2007 5:27 pm
Location: Canada

RE: Initial setup

Post by paulderynck »

Or... you can make a determination from the what the rules of the game say. From 19.4: "You only set up units from America in Flames or Patton in Flames if playing those games."

It's wonderful that people enjoy the boardgame to a greater extent if they use all the toys. But to demand that they be there in a computer version that is supposed to enforce the rules of the game seems somewhat arrogant. However, there may be a way to add them - check out the "Mods" threads.

And palad1n, I would never confuse you for an imbecile.
Paul
pzgndr
Posts: 3712
Joined: Thu Mar 18, 2004 12:51 am
Location: Delaware

RE: Initial setup

Post by pzgndr »

ORIGINAL: palad1n
Let me explain to all those people that do not have a certain level of intelligence. MWiF does not include AiF and PATiF, for very good reasons - these are essentially stand alone games in the WiF environment. What MWiF misses is that each of the add-ons introduce quite a number of units that CAN be part of either playable version of MWiF one chooses.

Sure, of course there are more add-ins that CAN be included. BUT, the design decision was to not include them, for now. Maybe someday AFTER the as-described design of MWiF is finally completed (ie, bugs fixed, optional rules implemented, remaining scenarios implemented, NetPlay functioning, AI functioning, etc.), THEN other stuff could be considered. Let's stay the course for the time being and get MWiF running first.
Bill Macon
Empires in Arms Developer
Strategic Command Developer
User avatar
Centuur
Posts: 9077
Joined: Fri Jun 03, 2011 12:03 pm
Location: Hoorn (NED).

RE: Initial setup

Post by Centuur »

Perhaps something for later, to include those extra units with an extra optional rule (if Steve still wants to make these kind of changes after years of hard labor...)
Peter
palad1n
Posts: 20
Joined: Thu Jan 19, 2012 7:30 am
Location: Australia

RE: Initial setup

Post by palad1n »

FYI, I have modified the naval and air MWiF csv files to include the AiF and PATiF air and naval (TRS, AMPH & SUB only) units. After a bit of an issue with lend lease ACFT (the names MUST match), everything works. In particular, scrapping all the Italian 3 movement factor TRSs will now allow the Italian player to have the two 4 factor TRSs for setup. Happy - yep. So now I have MWiF with all the force pool additions from AiF and PATiF for ACFT and the naval units. Yeehah. If any of you chaps would like a copy, drop me an email (which is provided through Matrix as I will not post it here).

Now, has anyone KiFed MWiF?

paulderynck, you yet again make a statement without the full context - 19.4 continued - In all cases you add these units to your force pools. Noting that 19.4 pertains to MINOR country setups, NOT major powers.
User avatar
paulderynck
Posts: 8494
Joined: Sat Mar 24, 2007 5:27 pm
Location: Canada

RE: Initial setup

Post by paulderynck »

Why not post those file in the Mods thread, like others have done with unit color and terrain mods?
Paul
palad1n
Posts: 20
Joined: Thu Jan 19, 2012 7:30 am
Location: Australia

RE: Initial setup

Post by palad1n »

Great idea and thanks. Did not think of that avenue. Done, although the first one is actually the air CSV, not the naval CSV (which is in the second post).
Post Reply

Return to “Tech Support”