Update already?

Moderator: AlvaroSousa

Post Reply
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

Update already?

Post by noissy »

I've just been playing around with the game today, a couple of times with no problems, everything working ok.
Tonight I opened the game up and the update was flashing. I clicked and the update ran ok.
Now, when I run the game, I'm just getting some music for a while and a blank, dark grey screen????
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

Tried to overwrite the update from the link here but, still not loading the game up.
I've uninstalled the game and will install again tomorrow, see what happens.
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
AlvaroSousa
Posts: 12016
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Update already?

Post by AlvaroSousa »

Sometimes software messes up. There is always a chance an error is written. Always try rebooting 1st, check if Direct X is up to date and drivers are upto date
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

Well, this morning I have reinstalled and updated but, still not loading.
It gets to a white screen with 'UNITY' displayed, then goes to the grey
screen. I can hear the background music as it tries to load but nothing.
I then uninstalled everything again, loaded up the game without the update
and it loaded up perfectly and is playable. I've checked the dxdiag and all
is fine so, it seems the update is causing the problem?
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
VPaulus
Posts: 3681
Joined: Thu Jun 23, 2011 2:02 pm
Location: Portugal

RE: Update already?

Post by VPaulus »

Please try the following:
Rename the Folder named "WarPlan" as "_WarPlan" in your Windows documents folder at:
...\Documents\My Games
Run the game and check if the issue persists.
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

Thanks for the suggestion VPaulus. I've reinstalled everything
putting the _ WarPlan as the folder. Still the same unfortunately.
I have a few games with Slitherine/Matrix and have never had this
problem before.
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
AlvaroSousa
Posts: 12016
Joined: Mon Jul 29, 2013 7:13 pm
Contact:

RE: Update already?

Post by AlvaroSousa »

If you like look in this file.

C:\Users\"your user name"\AppData\LocalLow\Kraken Studios\WarPlan\output_log.txt

Post the text file here. That is the Unity log file. Might give us some clues.

Also what machine do you have.
What OS do you have? Also see if it is 64b or 32b.
Creator Kraken Studios
- WarPlan
- WarPlan Pacific

Designer Strategic Command
- Brute Force (mod) SC2
- Assault on Communism SC2
- Assault on Democracy SC2
- Map Image Importer SC3
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

From what I can see, there isn't anything in the AppData folder, if I'm looking in the right place!
The laptop is WIN10 nd it has 32 and 64 bit.
I do notice that the Task Manager shows 32 bit attempting to install, not 64bit if that helps.
As I said before, I can't see how a game operates fine, only for an update to break it? I've never
had a Slitherine/Matrix game fail with any updates.
This is all becoming a bit too messy to put right.
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
VPaulus
Posts: 3681
Joined: Thu Jun 23, 2011 2:02 pm
Location: Portugal

RE: Update already?

Post by VPaulus »

ORIGINAL: noissy

Thanks for the suggestion VPaulus. I've reinstalled everything
putting the _ WarPlan as the folder. Still the same unfortunately.
I have a few games with Slitherine/Matrix and have never had this
problem before.

Just to clarify, have you renamed the folder I told in the Documents\My Games?
Please note that this folder is not created when you install the game nor it's removed when you uninstall the game.
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

yes VPaulus, I removed the folder, reinstalled, renamed the folder
as you stated - documents/mygames/_WarPlan.
I've noticed that when I try to run the game, the launcher is 32bit
not 64bit? Also, despite having the mygame folder named, it still
creates a ''WarPlan'' folder as well?
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
VPaulus
Posts: 3681
Joined: Thu Jun 23, 2011 2:02 pm
Location: Portugal

RE: Update already?

Post by VPaulus »

And if you don't update the game, is it running?
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

sorry VPaulus, only just seen your last post.
Yes, I just reinstalled it again and it ran ok.
Did the update and still not loading up.
I did notice that, when I said it goes as far as
the white screen with 'Unity' showing, that the
game logos are missing on that screen after the
update. The 3 logos appear on the original Unity
screen before the update, if that helps.
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
VPaulus
Posts: 3681
Joined: Thu Jun 23, 2011 2:02 pm
Location: Portugal

RE: Update already?

Post by VPaulus »

Have you ever tested the hotfix instead of the update?
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

what is the hotfix?
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
User avatar
Toby42
Posts: 1629
Joined: Sat Aug 09, 2003 11:34 pm
Location: Central Florida

RE: Update already?

Post by Toby42 »

ORIGINAL: noissy

sorry VPaulus, only just seen your last post.
Yes, I just reinstalled it again and it ran ok.
Did the update and still not loading up.
I did notice that, when I said it goes as far as
the white screen with 'Unity' showing, that the
game logos are missing on that screen after the
update. The 3 logos appear on the original Unity
screen before the update, if that helps.

That's what I get if I run the Quick Start option? If I run the desktop icon with menu's, it runs fine?
Tony
User avatar
VPaulus
Posts: 3681
Joined: Thu Jun 23, 2011 2:02 pm
Location: Portugal

RE: Update already?

Post by VPaulus »

ORIGINAL: noissy

what is the hotfix?

https://www.matrixgames.com/forums/tm.asp?m=4705196

Try this and don't update. Check if the issue is persisting.


ORIGINAL: Toby42

That's what I get if I run the Quick Start option? If I run the desktop icon with menu's, it runs fine?

Which Quick Start option? Where's the Quick Start option?
User avatar
Toby42
Posts: 1629
Joined: Sat Aug 09, 2003 11:34 pm
Location: Central Florida

RE: Update already?

Post by Toby42 »

ORIGINAL: VPaulus

ORIGINAL: noissy

what is the hotfix?

https://www.matrixgames.com/forums/tm.asp?m=4705196

Try this and don't update. Check if the issue is persisting.


ORIGINAL: Toby42

That's what I get if I run the Quick Start option? If I run the desktop icon with menu's, it runs fine?

Which Quick Start option? Where's the Quick Start option?

Quick Start option is on the start menu in the Warplan folder..
Tony
User avatar
noissy
Posts: 310
Joined: Mon Mar 12, 2012 5:35 pm
Contact:

RE: Update already?

Post by noissy »

Well, reinstalled the game, did the hotfix and the menu came
up as usual. I clicked on multiplayer, as I have a game set up
for me but it doesn't appear. (He set it up after updating his game).
So, I then clicked the update button in game and the same problem is
still happening?
I've tried the desktop shortcut, main game and Quick Start.
Glad it's not only me!
REGARDS
Peter

THE WARGAMERS CLUB FOR GENTLEMEN
(WGCG)
http://www.ww2wargamesclubforgentlemen.com/

Quality is better than quantity !
Post Reply

Return to “War Plan: Tech Support”