Serial Number error #200
Moderator: MOD_EIA
Serial Number error #200
Hey Guys,
I just tried to open the game but an error comes up.
#200 and that I should contact Matrix.
I sent an email what is this anyway?
I just tried to open the game but an error comes up.
#200 and that I should contact Matrix.
I sent an email what is this anyway?
Vice President Jersey Association Of Gamers
JerseyGamers.com
JerseyGamers.com
- Marshall Ellis
- Posts: 5630
- Joined: Tue Oct 02, 2001 3:00 pm
- Location: Dallas
RE: Serial Number error #200
Joe
This is an error from the copy protection module???
Did you move the install?
This is an error from the copy protection module???
Did you move the install?
RE: Serial Number error #200
No I didn't move the install.
I did have a complete system crash that required me to reload everything. I lost most everything.
I did have a complete system crash that required me to reload everything. I lost most everything.
Vice President Jersey Association Of Gamers
JerseyGamers.com
JerseyGamers.com
- Marshall Ellis
- Posts: 5630
- Joined: Tue Oct 02, 2001 3:00 pm
- Location: Dallas
RE: Serial Number error #200
Did you reinstall OK?
RE: Serial Number error #200
ORIGINAL: Marshall Ellis
Did you reinstall OK?
Did you reinstall OK?
_____________________________
Thank you
Marshall Ellis
After the backup was installed EiA was still there but I think my registry was rewritten.
Maybe this has something to do with that.
Before we go on I'm going to reload it from the disk.
Vice President Jersey Association Of Gamers
JerseyGamers.com
JerseyGamers.com
- Marshall Ellis
- Posts: 5630
- Joined: Tue Oct 02, 2001 3:00 pm
- Location: Dallas
RE: Serial Number error #200
That's the best way to do it.
Things happen there that don't in a normal copy process
Things happen there that don't in a normal copy process
RE: Serial Number error #200
If you recall the "Church Lady"?
Nevermind
Nevermind
Vice President Jersey Association Of Gamers
JerseyGamers.com
JerseyGamers.com
- Marshall Ellis
- Posts: 5630
- Joined: Tue Oct 02, 2001 3:00 pm
- Location: Dallas
RE: Serial Number error #200
As a matter of fact, yes I do. LOL!
RE: Serial Number error #200
I just got this error message when trying to install the game on a fresh install; however, the game was originally installed on the other partition on the drive which is still present. I tried deleting the Matrix Games folder and cleaning the registry (shouldn't be needed since it's a new install but what the hell) and reinstalling, still getting the same error.
- Marshall Ellis
- Posts: 5630
- Joined: Tue Oct 02, 2001 3:00 pm
- Location: Dallas
RE: Serial Number error #200
You are missing some important elements???
You did a fresh install from disk?
I will check with Matrix on this...
You did a fresh install from disk?
I will check with Matrix on this...
- Erik Rutins
- Posts: 39759
- Joined: Tue Mar 28, 2000 4:00 pm
- Location: Vermont, USA
- Contact:
RE: Serial Number error #200
Did you uninstall the original copy before reinstalling the new one?
Erik Rutins
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
RE: Serial Number error #200
ORIGINAL: Marshall Ellis
You are missing some important elements???
You did a fresh install from disk?
I will check with Matrix on this...
Yes, I put in the disk. It essentially stopped responding after the last file transferred. When I forced the program to close all the files were there.
The update 1.04.07 went fine without any stalls/stops. The serial reg file is there.
- Erik Rutins
- Posts: 39759
- Joined: Tue Mar 28, 2000 4:00 pm
- Location: Vermont, USA
- Contact:
RE: Serial Number error #200
ORIGINAL: NeverMan
Yes, I put in the disk. It essentially stopped responding after the last file transferred. When I forced the program to close all the files were there.
Ok, so the installer hung somehow at the end? Did you turn off all anti-virus/security software that could be interfering before installation? I would suggest a complete uninstall and reinstall with all background programs off, that should make sure the installer completes.
Erik Rutins
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
RE: Serial Number error #200
ORIGINAL: Erik Rutins
Did you uninstall the original copy before reinstalling the new one?
I had two partitions originally C: and D:
C: had OS
D: has games, including EiANW
I did a clean install on C of a new OS (Vista x64). I then deleted all EiANW files and did a registry cleanup. I then tried to reinstall EiANW back to D but the install gets stuck after the last file (Windows Help Files) are installed and the EiANW install window won't shut. I forced it shut. All files seem to be there but I get this error. I then installed the update 1.04.07 without any problems. Still the error is there.
I did not have any anti-virus/security software running at the time. I will close ALL programs and try again.
RE: Serial Number error #200
ORIGINAL: Erik Rutins
ORIGINAL: NeverMan
Yes, I put in the disk. It essentially stopped responding after the last file transferred. When I forced the program to close all the files were there.
Ok, so the installer hung somehow at the end? Did you turn off all anti-virus/security software that could be interfering before installation? I would suggest a complete uninstall and reinstall with all background programs off, that should make sure the installer completes.
I have closed all known programs running (non-OS and I don't have the firewall or virus scan on/running) and no luck. The program still hangs at the end of installation. It's just been sitting there for about 5 minutes now. Any ideas?
ps. I emailed the "helpdesk/support" people but they haven't responded.
It's impossible to do an uninstall using the EiANW uninstall since the only filed in the Uninstall folder are a .dat file and a .xml file.
- Erik Rutins
- Posts: 39759
- Joined: Tue Mar 28, 2000 4:00 pm
- Location: Vermont, USA
- Contact:
RE: Serial Number error #200
ORIGINAL: NeverMan
I did a clean install on C of a new OS (Vista x64). I then deleted all EiANW files and did a registry cleanup.
The way to uninstall a game is to either use the Uninstaller we provide or to go through Add/Remove programs in your control panel. The method you used (delete and registry clean) can create many problems.
I then tried to reinstall EiANW back to D but the install gets stuck after the last file (Windows Help Files) are installed and the EiANW install window won't shut. I forced it shut. All files seem to be there but I get this error. I then installed the update 1.04.07 without any problems. Still the error is there.
That's not normal, something is interfering with the installer. This is the same installer program we use on all our games. One of the last things is does is make some additions to the registry and generate a few security-related files. When I hear that it hung at that point, that has in the past meant that 100% of the time another piece of software is preventing it from doing that.
Regards,
- Erik
Erik Rutins
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
- Erik Rutins
- Posts: 39759
- Joined: Tue Mar 28, 2000 4:00 pm
- Location: Vermont, USA
- Contact:
RE: Serial Number error #200
ORIGINAL: NeverMan
It's impossible to do an uninstall using the EiANW uninstall since the only filed in the Uninstall folder are a .dat file and a .xml file.
Did you try just running the Uninstall link we provide for you in your Start folder? Or using Add/Remove programs? Note that your original method of just deleting the game and running the registry cleaner may have "broken" the uninstall process. Windows is fun that way. Are you comfortable with manually editing your registry?
Regards,
- Erik
Erik Rutins
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
RE: Serial Number error #200
ORIGINAL: Erik Rutins
ORIGINAL: NeverMan
It's impossible to do an uninstall using the EiANW uninstall since the only filed in the Uninstall folder are a .dat file and a .xml file.
Did you try just running the Uninstall link we provide for you in your Start folder? Or using Add/Remove programs? Note that your original method of just deleting the game and running the registry cleaner may have "broken" the uninstall process. Windows is fun that way. Are you comfortable with manually editing your registry?
Regards,
- Erik
1. The program does NOT install (although I can still run the EiANW exe from the folder to get the error and opening page with "PLAY" and the list of options, etc) so therefore there is no Desktop Icon, no Startup folder, does not show in Add/Remove programs, etc, etc...
2. There was no way for me to "break" it since it was never installed on this OS to begin with so I'm confused by what you mean. The "method" I used was the only one available to me since it was a CLEAN INSTALL OF AN OS.
3. Yes, I am very comfortable with manually editing the registry.
RE: Serial Number error #200
I believe that I resolved this by going in and shutting down as many "Services" as Windows would let me. Thanks for the help Erik and Marshall, much appreciated!
- Erik Rutins
- Posts: 39759
- Joined: Tue Mar 28, 2000 4:00 pm
- Location: Vermont, USA
- Contact:
RE: Serial Number error #200
ORIGINAL: NeverMan
1. The program does NOT install (although I can still run the EiANW exe from the folder to get the error and opening page with "PLAY" and the list of options, etc) so therefore there is no Desktop Icon, no Startup folder, does not show in Add/Remove programs, etc, etc...
Yeah, that would be about right if the install hung before it finished. I thought your first installation was complete though.
2. There was no way for me to "break" it since it was never installed on this OS to begin with so I'm confused by what you mean. The "method" I used was the only one available to me since it was a CLEAN INSTALL OF AN OS.
Ok, I didn't understand this, sorry. I thought you were just switching from one drive to the other and hadn't properly uninstalled the first installation.
Regards,
- Erik
Erik Rutins
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.
CEO, Matrix Games LLC

For official support, please use our Help Desk: http://www.matrixgames.com/helpdesk/
Freedom is not Free.


